DXV AT200 User Manual
  1. Manuals
  2. Brands
  3. DXV Manuals
  4. Toilets
  5. AT200
  6. User manual

DXV AT200 User Manual

Hide thumbs Also See for AT200:
Table of Contents

Advertisement

Quick Links

engliSh
AT200
user manual
D29020CS416-XXX - seat & Bowl ComBination-CwH
D23020CS11S-XXX - Bowl-CwH
D28000AS416-XXX - seat / BoDY unit-CwH
Canvas white (415)
thank you for purchasing this product.
after reading this manual, please keep it in a place where you can refer to it easily.
Be Sure To follow The SAfeTy preCAuTionS.
Failure to follow the safety precautions may result in serious accidents in some circumstances.
each of these items are extremely important for safety, and should be strictly observed.
in the event that an accident occurs as a result of improper usage, DXV by american standard
will assume no responsibility for damages.
©2014 as america inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AT200 and is the answer not in the manual?

Questions and answers

Related Manuals for DXV AT200

Summary of Contents for DXV AT200

  • Page 1 Failure to follow the safety precautions may result in serious accidents in some circumstances. each of these items are extremely important for safety, and should be strictly observed. in the event that an accident occurs as a result of improper usage, DXV by american standard will assume no responsibility for damages.

  • Page 2: Table Of Contents

    Contents SATIS Features …………………………………………… Cleaning and Maintenance ○ Cleaning and Maintenance ………………………… 38 Functions ……………………………………………………… ○ Cleaning the Toilet Seat and Lid ……………… 40 ○ Removing the Toilet Seat Lid for Cleaning Safety Precautions ……………………………………… ○ Cleaning the Toilet Bowl (Ceramic Parts) DANGER ………………………………………………………………...

  • Page 3: Satis Features

    AT200 Features This product is designed so that people such as elderly persons, persons with limited mobility, or illness, and children can use it without assistance. To ensure proper usage of this product, please read this “User’s Manual” carefully before using it.
  • Page 4 AT200 Features Remote Control Unit 1. Main Panel * Remote control backlight will be illuminated when in use. a Transmitter b Toilet seat OPEN/CLOSE button c STOP button d Rear cleansing button e Rear cleansing - mild button f Front cleansing button...
  • Page 5 AT200 Features Remote Control Unit 2. Secondary Panel a Hr/Min buttons b Power save button c Seat temperature button d Water temperature button e Auto flush button f Nozzle cleaning button g Battery LED h Night light button i Auto seat-open button j Dryer temperature button 3.

  • Page 6: Functions

    Functions Cleansing Rear cleansing Page 19 Provides rear cleansing with a strong spray. Rear cleansing Page 20 Provides rear cleansing with a gentle spray. - mild Oscillating Page 19/20 Moves the nozzle back and forth to wash a wide range. spray Oscillating Page 19/20...
  • Page 7 Functions ○ : Available : Not available – Comfort Functions Night light Page 29 Makes the toilet easy to find at night. Seat heater auto Turns the seat heater off when a user sits on the seat. Turns the seat heater on Page 30 again when the user stands up.

  • Page 8: Safety Precautions

    Safety Precautions When using electrical products, especially when children are present, basic safety precautions should always be followed, including the following: Please read the following Safety Precautions thoroughly before use. Failure to heed these precautions may result in serious consequences under some circumstances. Each of these items are extremely important for safety, and should be strictly observed.
  • Page 9 Safety Precautions WARNING Disconnect the power plug periodically and clean it with a dry cloth, as dust accumulated on the power plug may cause fire. * Wait for about 10 seconds before inserting the power plug again. Completely connect the power plug, as failure to do so may cause electric shock or fire. Do not damage, bend excessively, twist, bind, or place heavy objects on the power cord.
  • Page 10 Safety Precautions WARNING Please observe the following precautions when inserting batteries for the remote control: ● Place the battery in the correct direction, aligning the positive and negative terminals as indicated inside the battery compartment. ● If the toilet will not be used for a long period of time, remove the batteries from the remote control. ●...

  • Page 11: Caution

    Safety Precautions CAUTION For care of the plastic parts, our company recommends the use of a mild, liquid, all-purpose cleaner. Avoid using abrasive products (such as powdered cleansers) and chlorine-based products (such as bleach), as these products can damage the anti-bacterial properties of the plastic components.
  • Page 12 Safety Precautions CAUTION Only connect the toilet to tap water. * Otherwise, this may cause corrosion inside this product, resulting in electric shock, fire, or inflammation of skin. This product should be supplied with a cold water line only, as supplying it with a hot water line may damage its internal components.
  • Page 13 Safety Precautions GROUNDING INSTRUCTIONS The product is for use on a 120 V circuit, and has a grounding plug that looks like the plug illustrated in sketch A in Figure 1. A temporary adapter, which looks like the adapter illustrated in sketches B and C, may be used to connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available.

  • Page 14: Handling Precautions

    Handling Precautions Do not expose the toilet to direct sunlight, as this may cause discoloration, or the remote control or body sensor may malfunction. Do not open or close the toilet seat or lid roughly, as this may result in damage to either of these parts.

  • Page 15: Preparation And Checks Before Use

    Preparation and Checks Before Use Before using the seat unit for the first time, check the following items. STEP Checking the Water Shutoff Valve [1] * If the water shutoff valve is closed, turn the open/close handle counterclockwise 90 degrees to fully open it. STEP Connecting the Power Plug to the Outlet [2] • First connect the power plug to the outlet...

  • Page 16: Checking The Rear Cleansing Feature [3]

    Preparation and Checks Before Use STEP Checking the Rear Cleansing Feature [3] • Cover the seat sensor with a piece of paper or cloth. * If the paper or cloth is black, the occupied seat sensor may not function. • Press the Cleansing button [A]. • Place a hand above the nozzle tip to block the sprayed water. * At this time, water comes out from a point near the nozzle tips in preparation for operation. • Press the STOP button [B] to stop the shower. • Remove the paper or cloth covering the seat sensor.

  • Page 17: Adjusting The Spray Water Temperature

    Preparation and Checks Before Use Our company recommends that you perform the following operations before using the seat unit for more comfort. Adjusting the Spray Water STEP Temperature • Press the Water temp. button [C]. * The water temperature can be set to any of six levels - “OFF” (water temperature), and ranging from “Low” (approximately 90°F (32°C)) to “High”...

  • Page 18: General Operation

    General Operation STEP Auto Seat Open Function • Press the Auto Seat Open button [A] to activate this feature. * “AUTO SEAT-OPEN” button appears on the LCD. * The function is set to “ON” in the default settings. * If the seat sensor is not activated after the seat lid opens independently, the seat lid automatically closes after approximately one minute.

  • Page 19: Auto Deodorizing Function

    General Operation STEP Auto Deodorizing Function 1 Deodorizing starts when the toilet seat lid opens. When the toilet seat opens, the deodorizer fan is activated in “full power mode”. 2 The deodorizer operates in normal operation while the user is sitting on the seat. The deodorizer fan changes to “power mode”. 3 Deodorizing starts when the user stands up. The deodorizer fan increases output again to “full power mode”. 4 Deodorizing stops.

  • Page 20: Front And Rear Cleansing

    General Operation STEP Front and Rear Cleansing For rear cleansing • Press the Cleansing button [B]. * Water will drip from the nozzle. This washes the nozzle before use. The nozzle extends and water sprays. • Press the STOP button [A]. * The spray will stop and the nozzle will retract. To adjust the water pressure Press on the Spray...

  • Page 21: Mild

    General Operation For rear cleansing - mild • Press the Cleansing button [B]. * Water will drip from the nozzle. This washes the nozzle before use. The nozzle extends and water sprays. • Press the STOP button [A]. * The spray will stop and the nozzle will retract. To adjust the water pressure Press on the “Spray Strength” button [C]. * The water pressure can be adjusted to any of six levels. Select the water pressure as desired. To change the cleansing mode Press the Cleansing button [B] a second time during rear cleansing - mild.

  • Page 22: Front Cleansing

    General Operation For front cleansing This spray nozzle is designed for women’s use only. • Press the Bidet button [B]. * Water will drip from the nozzle. This washes the nozzle before use. The nozzle extends and water sprays. • Press the STOP [A] button. * The spray will stop and the nozzle will retract. To adjust the water pressure Press on the “Spray...

  • Page 23: Nozzle Position Adjustment

    General Operation Massage Function During rear cleansing or rear cleansing - mild, the massage function alternates between a strong spray and a gentle spray to provide a massage effect. • Press the Massage button [A] during rear cleansing or rear cleansing - mild. • Press the Massage button [A] again to end this feature. Nozzle Position The nozzle position can be adjusted backwards and forwards during rear cleansing, rear cleansing-wild, or front cleansing. • Press the button on the “Nozzle Position” button [B].

  • Page 24: Using The Dryer

    General Operation STEP Using the Dryer Dryer Function Warm air is blown to dry the area washed by the shower. • Press the Dryer button [B]. * The air temperature can be adjusted to any of three levels. * The deodorizer temporarily stops when drying is performed. * Set the remote control in the holder, and press the [Dryer] button. • Press the STOP button [A] to stop drying.

  • Page 25: Flushing The Toilet

    General Operation STEP Flushing the Toilet Auto Flush Function • Activate the Auto Clean button [A]. * The “AUTO CLEAN” button is displayed on the LCD. * The toilet is automatically flushed when the user stands up. To deactivate the full auto flushing function Deactivate the Auto Clean button [A]. * The “AUTO CLEAN” button indicator on the LCD disappears. Remote Control Flush Function To flush the toilet using the remote control Press the Flush/Full [B] and the Flush/ Partial [C] buttons accordingly.

  • Page 26: Auto Close Function

    General Operation STEP Auto Close Function * The toilet seat lid closes approximately 1 minute after the user leaves the toilet. It does not close when the Auto Seat Open button is turned off. * The upper body sensor detects the motion of a person and automatically opens and closes the toilet seat lid.

  • Page 27: Power Save Function

    General Operation The power save function includes two functions for saving power: one-touch power save (8 hours), and advanced power save (always on). Using these functions together will save more power. The power saving functions are set to “OFF” in the default settings. One-Touch Power Save (8 hours) When the ONE-TOUCH POWER SAVE button is pressed, Recovered...
  • Page 28 Power Save Function Advanced Power Save (always on) The advanced power save function reduces power con- sumption by lowering the water and seat temperatures when the toilet seat lid is closed. Set temperature When used Temperature in * Power is saved at all times while the toilet seat lid is power-save mode closed.

  • Page 29: Deodorizing Function

    Deodorizing Function Press the Deodorizer button on the remote control to enhance the deodorizing feature. Press the Deodorizer button [A] while the automatic deodorizing function is operating. * A short beep sounds when the setting is complete. * The deodorizer fan goes into “turbo mode”, which boosts the effect of removing odor in the toilet bowl.

  • Page 30: Night Light Function

    Night Light Function When the seat lid opens, a soft light illuminates the base of the toilet and the inside of the bowl. When the user leaves the toilet, the light goes out automatically. The default setting for this light is “ON”. Press the Light button [A] to deactivate the night light.

  • Page 31: Comfort Features

    Comfort Features Preventing Low-temperature Burns [Seat Heater Auto OFF] This product is equipped with a safety feature (seat heater auto off) that prevents low temperature burns. When the user sits on the seat, the seat heater is automatically deactivated. When the user stands up, the seat heater is reactivated.

  • Page 32: Lowering The Water Pressure

    Comfort Features Lowering the Water Pressure For users who are sensitive to water pressure, the water pressure setting for the rear cleansing, rear cleansing - mild and front cleansing can be adjusted below the normal range. The default setting for this feature is OFF. To activate this feature, follow the steps below.

  • Page 33: Adjusting The Auto Flush Function

    Comfort Features Adjusting the Auto Flush Function The automatic flush function is factory set so that the flush cycle will begin 6 seconds after the user stands up from the toilet. However, this flush delay setting can be changed. To adjust the flush delay setting, follow the steps below. Press the Power save [A] and Hr.

  • Page 34: Restoring The Default Settings

    Comfort Features Restoring the Default Settings All of the product’s functions can be reset to their factory defaults even after the settings have been changed by the user. To restore the factory default settings, follow the steps below. Press the Water temp. button [A] and Seat temp.

  • Page 35: Other References

    Other References Other References The seat sensor prevents unintended operation. This toilet is equipped with a seat sensor that will only allow the cleansing and frying functions to operate when the toilet seat is occupied. * The rear cleansing, rear cleansing - mild, front cleansing, and dryer features do not operate even if the button is pressed, unless the toilet seat is occupied.
  • Page 36 Other References The body sensor allows you to open the seat lid without using your hands. This toilet is equipped with an upper body sensor. This detects when a person enters the toilet room, and opens and closes the toilet seat lid automatically. The upper body sensor detects the motion of a person. * The sensor cannot detect the user if they stand to the side in front of the toilet or away from the toilet.
  • Page 37 Other References Interference with radio or television If a radio or a TV is placed near this toilet, interference with the signals from remote control unit may occur. If the interference occurs, move the radio or TV away from this product. Condensation forms. Due to humidity and/or temperature differences between room and the seat unit or surface of the bowl, condensation may form on the seat unit or bowl.

  • Page 38: Manual Toilet Flushing

    Manual Toilet Flushing In the event that water service to the toilet is interrupted, fill a bucket with water and carefully pour the contents into the toilet bowl to manually flush the toilet. Repeat if necessary. * When the waste is cleared from the bowl, pour water into the bowl to restore the bowl’s water level to its normal height.

  • Page 39: Cleaning And Maintenance

    Cleaning and Maintenance Below, our company offers some general guidelines as to the cleaning of this product. Please note that there are some cleaning products which should not be used. As a general rule, our company recommends the use of liquid, all-purpose cleansers for this product. Cleaning tools Item Description...
  • Page 40 Cleaning and Maintenance Places to be cleaned and types of contamination Toilet seat, lid, and cover Page 40 Dust, finger marks, and urine stains Narrow gap between the toilet seat and lid Page 41 Dust and urine stains Nozzle guard Page 44 Water residue and urine stains Nozzle Page 46...

  • Page 41: Cleaning The Toilet Seat And Lid

    Cleaning the Toilet Seat and Lid Cleaning the Toilet Seat, Lid, and Covers (Plastic Panels) • Dampen a soft cloth and wipe the surfaces. Our company recommends cleaning the toilet bowl frequently to prevent dirt build up on the toilet surfaces. Additionally, do not use a dry cloth or toilet paper to wipe the surfaces, as this could result in scratches. Wiping with a damp cloth also prevents static electricity, which can attract dust particles, resulting in blackish contamination.
  • Page 42 Removing the Toilet Seat Lid for Cleaning The seat lid can be removed easily. This is useful when cleaning the hinge that is normally hidden or cleansing the whole seat lid. Removing the Toilet Seat Lid 1 Press the Power button [A] to turn the power off. Check that the power LED is not illuminated. 2 Open the seat lid. 3 Turn up the toilet seat lid release lever. 4 Lift the right side of the seat lid to disengage it from the hinge pin on the toilet seat. 5 Slightly tilt the toilet seat lid toward you and slide it to the left to remove it. [Note] • Do not use excessive force on the seat lid, as this may damage it.
  • Page 43 Removing the Toilet Seat Lid for Cleaning Assembling the Toilet Seat Lid 1 Align the pin hole on the left side of the seat lid with the hinge pin on the seat, and insert the pin into the hole. 2 Lift the right side of the seat lid to set it with the hinge pin on the toilet seat. 3 Turn the toilet seat lid release lever downward until a click is heard. 4 Press the Power button [A] to turn the power on. Check that the power LED is illuminated. • Indicator Upper body sensor...

  • Page 44: Cleaning The Toilet Bowl (Ceramic Parts)

    Cleaning the Toilet Bowl Cleaning the Toilet Bowl (Ceramic Parts) The toilet bowl is finished with our company Hyper Clean surface. • Clean the bowl with water or warm water, using a soft brush or sponge dampened with neutral cleanser. [Note] • Do not use chlorinated cleansers, acidic cleansers or disinfectants, as the gas vapor could damage this product or cause failures. • Do not use hot water, as this may damage the toilet. • Do not use an abrasive brush or cleanser, as these will deteriorate the effect of the Hyper Clean surface. Contamination at the bottom of the bowl? A shadow in the bottom of the toilet bowl might make the bottom of the toilet appear dirty when the night light is lit.

  • Page 45: Removing The Toilet Seat Lid For Cleaning

    Cleaning the Nozzle Guard • Clean the nozzle guard with a dampened soft cloth or sponge. As mentioned previously, use a mild, liquid all-purpose cleanser. [Note] • Avoid wiping with a dry cloth or toilet paper, as this cause scratches. • Avoid using an abrasive brush or cleanser. The nozzle guard can be removed for easy cleaning. See the procedure below. Removing the Nozzle Guard 1 Turn off the Auto Clean and Auto Seat Open buttons. * This will disable the automatic lid and automatic flush functions.
  • Page 46 Cleaning the Nozzle Guard Assembling the Nozzle Guard 1 While the nozzle is retracted, firmly press the two tabs into the slots on the base as shown in the diagram. * Press the Stop button to retract the nozzle when it is out. [Note] • Push the lugs until a click is heard. Check that the guard is correctly assembled. • The guard has a top and bottom, and must be assembled in the correct way. • Do not use excessive force, as this could damage the guard.

  • Page 47: Cleaning The Nozzle

    Cleaning the Nozzle The Spray nozzle can be cleaned using either of the methods listed below. ● The nozzle can be cleaned using the Nozzle cleaning button on the remote control unit. ● The nozzle can be cleaned manually. Cleaning the Nozzle with the Remote Control Unit • To clean the nozzle while using the toilet (sitting on the seat) using the remote control unit, follow the procedure below.
  • Page 48 Cleaning the Nozzle Cleaning the Nozzle Manually (Continued) 4 Clean the rear cleansing nozzle. * Since the nozzle moves in a short stroke, the nozzle can be cleaned by simply applying a sponge to it. * The nozzle automatically retracts after approximately one minute. When the Nozzle Cleaning button is pressed again after the nozzle retracts, the rear cleansing nozzle extends again.
  • Page 49 Cleaning the Nozzle To Stop the Motion of the Nozzle 1 Press the STOP button [E]. * The nozzle stops. * The nozzle stops for approximately 5 minutes and then automatically retracts. In this case, when the Nozzle Cleaning button is pressed again after the nozzle retracts, the nozzle extends again. 2 Press the STOP button again. * The nozzle retracts.

  • Page 50: Replacing The Nozzle Tip

    Replacing the Nozzle Tip Removing the Nozzle Tip 1 Turn off the Auto Clean [A] and Auto Seat Open [B] buttons. * This will disable the automatic lid and automatic flush functions. 2 Lift the seat lid and seat. 3 Press the Nozzle Cleaning button [C]. * The rear cleansing nozzle extends and oscillates. * Water will automatically wash the nozzles. <To select the front cleansing nozzle for replacement>...
  • Page 51 Replacing the Nozzle Tip Assembling the Nozzle Tip * If the nozzle retracts to its original position, perform steps 2 to 5 in “Removing the nozzle tip” to expose the nozzle. 1 Align the replacement mark on the right of the nozzle tip with the center mark of the nozzle, completely insert the nozzle ②...

  • Page 52: Removing The Side Covers

    Removing the Side Covers The side covers can be removed easily. Remove them when cleaning the rear side of the toilet, and hidden areas on the floor. Removing the Side Covers 1 Disconnect the power plug from the outlet. 2 Remove the cap. Remove the flat head screw using a Phillips screwdriver. 3 Slowly pull the bottom of the side cover toward you and disconnect the “clip” from 皿ねじ the “clip holder.”     4 Slowly pull the side cover downward and disconnect the “lug” from the “slot” on the seat unit.

  • Page 53: Low Water Pressure

    Low Water Pressure If the toilet has been used for a long period of time and flushing or cleansing functions seem to be getting weak, clean the filters as described in the following procedure. Generally, the filters should be cleaned once every two years. Cleaning the Filter 1 Close the water shutoff valve.

  • Page 54: Low Battery Indicator

    Low Battery Indicator The battery indicator on the main display panel will flash when the battery needs replacement. (→ Page 34) Replace the batteries with new ones as described in the following procedure. [Note] • Install batteries with the positive and negative poles in the correct direction as shown on the remote control case.

  • Page 55: Periods Of Non-Use

    Periods of Non-use In the following cases, be sure to drain the toilet according to the procedures below and disconnect the power plug from the outlet. ● When the toilet is not used for extended periods of time, such as when you are away, as the water could become dirty and cause clogging. ●...

  • Page 56: Preventing Freezing

    Preventing Freezing To prevent damage that may result from freezing water, follow the procedures described below. When performing these procedures, the power save feature should be turned off. General Anti-freeze Measures 1 Set the seat temperature to “high” and close the seat lid. 2 Turn off the power save function. (Page 26) 3 Heat the toilet room. * If the toilet room cannot be warmed, perform the following antifreeze procedures.
  • Page 57 Preventing Freezing Intermittent Flushing Method Water in the seat unit is drained every 3 minutes to prevent water in the seat unit from freezing. The toilet is flushed every 6 minutes to prevent water in the toilet from freezing. 1 Press the Massage [C] and Nozzle Cleaning [D] buttons simultaneously for 2 seconds. * Water is drained from the seat unit every 3 minutes for approximately 1 minute to prevent water from freezing while the toilet is not used.
  • Page 58 Preventing Freezing 5 Press the Power save [A] and Auto Clean [B] buttons simultaneously for 2 seconds. * Drain the remaining water in the seat unit for approximately 15 seconds. 6 Thoroughly wash the filter and O-ring in water to remove grime. 7 Fully reattach the filter. 8 Attach the side cover. (Page 51) 9 Check that no water leaks from the water shutoff valve. • When using the toilet again Be sure to perform usage checks before use. (Page 14) CAUTION CAUTION Close the water shutoff valve when removing the filter.

  • Page 59: Connecting/Disconnecting The Water Supply Hose

    Connecting/Disconnecting the Water Supply Hose Disconnecting the Water Supply Hose Remove the clip ring before disconnecting the water supply hose. 1 Insert a flat screwdriver into the gap. * The clip ring is designed so that the locking tab catches the other end of the ring. 2 Press the screwdriver down, as shown in the diagram. 3 Push the screwdriver forward to release the locking tab.
  • Page 60 Connecting/Disconnecting the Water Supply Hose Connecting the Water Supply Hose 1 Connect the water supply hose with the water shutoff valve. 2 Close the clip ring until it clicks as shown in the diagram below. * After the clip ring is attached, turn it to check that it is firmly secured.

  • Page 61: Troubleshooting

    Troubleshooting In many cases, problems can be easily corrected. Please check the following items before placing a service call. If a problem cannot be corrected after checking the items below, please contact our company for service. All Functions Symptom Cause Solution Page Check for a power failure...
  • Page 62 Troubleshooting Rear Cleansing, Rear Cleansing - Mild, and Front Cleansing Symptom Cause Solution Page The water shutoff valve is Turn the open/close handle closed. counterclockwise 90°. The filter is clogged. Clean the filter. The water supply pressure is too low, or the water pressure Press “+”...
  • Page 63 Troubleshooting Seat Heating Symptom Cause Solution Page Press the Seat temp. button and The seat temperature is set too adjust the temperature to the low. The toilet seat is appropriate level. not warm. The power save function is Cancel the power save function. activated.
  • Page 64 Troubleshooting Deodorizer Symptom Cause Solution Page The deodorizer Something is covering the Remove whatever is covering fan runs occupied seat sensor. the sensor. continuously. The deodorizer The deodorizer function is Turn on the automatic fan does not turned off. deodorizing function. operate.
  • Page 65 Troubleshooting Auto Seat Open Function Symptom Cause Solution Page Press the Open/Close button. If the seat does not open or The seat and The seat and lid are pushed close automatically, disconnect — lid closes too during auto close. the power plug from the outlet quickly.
  • Page 66 Troubleshooting Miscellaneous Symptom Cause Solution Page There are water Frequently wipe water drops. drops on the Humidity is high, forming ─ Also, ventilate the toilet room underside of the condensation. adequately. toilet and water shutoff valve. A gurgling sound is emitted from the seat unit When: This is not a problem.

  • Page 67: After-Sales Service

    69 of this manual. Keep your proof of purchase (typically the sales receipt from your DXV by AMerican Standard dealer) where it can be accessed easily. The warranty period is 3 years from the date of purchase.

  • Page 68: Specifications

    Specifications Grade D28000AS416-XXX Rated power 120 VAC, 60 Hz Rated power consumption 1300 W Power saving type Instant system Suitable Minimum pressure 14.5 psi (0.10 MPa) or more (when water flow is 4.8 GPM (18 L/min) or more) tap water pressure Maximum pressure 108.83 psi (0.75 MPa) (static water pressure)

  • Page 69: Optional Parts

    Water supply hose (680mm) 7381443-205.0070A Water supply hose (900mm) 7381443-206-0070A Water supply hose (1000mm) 7381444-201-0070A Remote control 7381445-201-0070A Deodorizer Cartridge For additional components or to order replacement parts, contact your local customer service repre- sentative, or see the website at www.DXV.com...
  • Page 70 LIMITeD WARRANTY This toilet comes with a three year warranty on all parts of the toilet. If inspection of this DXV by American Standard plumbing product, inclusive of the chinaware and all mechanical parts, confirms that it is defective in materials or workmanship, DXV by American Standard will repair or, at its option, exchange the product for the same or a similar model.
  • Page 71 Your registration will make it easier to service your product. INSTRUCTIONS: Register your toilet at www.DXV.com. Please save your point of purchase (sale receipt). IF YOU HAVE ANY QUESTIONS, OR PARTS ARE DAMAGE OR MISSING, DO NOT CONTACT, OR RETURN, THIS PRODUCT TO THE STORE.

Table of Contents

Save PDF