Tradewinds TC451 Owner's Manual
  1. Manuals
  2. Brands
  3. Tradewinds Manuals
  4. Accessories
  5. TC451
  6. Owner's manual

Tradewinds TC451 Owner's Manual

Evaporative coolers
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Owner's Manual
TC451, TS451
TC571, TS571
Assembly
Operation
Repair Parts
Maintenance
READ AND SAVE THESE
INSTRUCTIONS
WARNING: Install only per
instructions. Failure to follow
installation instructions may create a
safety hazard and WILL void the
warranty
ALWAYS disconnect the power from
any evaporative cooler before
attempting any kind of maintenance.
4 Major areas to check for proper operation
Ensure unit is level
Check for proper belt tension
Check that water flows throughout the system
Be sure that motor and blower pulleys are aligned
The Preferred Non-Metallic Evaporative Cooler
5800 Murray St., Little Rock, AR 72209 USA
Cooler MUST be installed on the legs provided
(Down discharge models only)
EVAPORATIVE COOLERS
Side Discharge
Models:
TS451 & TS571
1
Down Discharge
Models:
TC451 & TC571
p/n 60OM
rev. 3/02

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TC451 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Tradewinds TC451

  • Page 1 EVAPORATIVE COOLERS The Preferred Non-Metallic Evaporative Cooler 5800 Murray St., Little Rock, AR 72209 USA Owner’s Manual Down Discharge TC451, TS451 Models: TC571, TS571 TC451 & TC571 Assembly Operation Repair Parts Maintenance READ AND SAVE THESE INSTRUCTIONS WARNING: Install only per Side Discharge instructions.

  • Page 2: Safety Precautions

    Installation Your downdraft Tradewinds cooler must be installed on a FLANGED ROOF JACK in order to support the center of the cooler. DO NOT sleeve a straight roof jack into the discharge opening of the cooler. Straight roof jacks must be equipped with a flange jack extender.

  • Page 3: Motor Installation

    Louver latches The latches at the corners of your Tradewinds cooler are designed to hold the louvers securely in place and prevent gapping which degrades cooler performance. To unlatch the louvers for removal: Slip a flat head screwdriver under one corner of the latch and pry out gently.

  • Page 4: Electrical Connections

    Electrical connections Tradewinds coolers must be wired in accordance with applicable codes and regulations. If you are not familiar with local wiring codes, SEEK THE ASSISTANCE OF A LICENSED PROFESSIONAL ELECTRICIAN. WARNING: To reduce the risk of fire or electrical shock, do not use this fan with any solid-state speed control device.

  • Page 5: Post Installation Inspection

    A rule of thumb used for deciding how far to open each window or how many windows to open is to allow 2 square feet of exhaust for each 1000 CFM of airflow. For example, the TC451 delivers 4100 CFM; therefore, you will need approximately 8 square feet of exhaust area.
  • Page 6 TRADEWINDS LIMITED LIFETIME WARRANTY Tradewinds Technologies, Inc. (“Tradewinds”) provides to each original purchaser of the evaporative cooler (the “Product”) the cabinet parts consisting of the top cap, base, louvered air panels, and blower housing a LIMITED LIFETIME warranty against warping, heat distortion, stress cracking, and defects in workmanship or materials, but only if normal function of the product is inhibited by the defect.
  • Page 7 Part No. Item Description Descripción No. de Ref. TS451 TS571 Superior 41C04 51C04 Bottom Fondo 41C03 51C03 Front Frente 41C06 51C06 Support Bracket Set Juego de ménsulas de soporte 41C07 41C07 Louver Clip Presilla de parrilla 60CC 60CC Right Blower Side Soplador lado derecho 41C01 51C01...
  • Page 8 Part No. Item Description Descripción No. de Ref. TC451 TC571 Superior 46C04 56C04 Bottom Fondo 46C03 56C03 Right Blower Side Soplador lado derecho 46C01 56C01 Left Blower Side Soplador lado izquierdo 46C02 56C02 Blower Assembly Soplador la asamblea 46BHU 56BHU...

This manual is also suitable for:

Ts451Tc571Ts571

Table of Contents