Baroness LM56 Information Leaflet
Height of cut adjustment
Hide thumbs
Also See for LM56:
- Installation manual (12 pages) ,
- Technical information (3 pages) ,
- Technical information (5 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Baroness LM56
Summary of Contents for Baroness LM56
- Page 1 Technical Information Leaflet TIL: 013 LM56/66 Height of Cut Adjustment...
- Page 2 HEIGHT OF CUT ADJUSTMENT The setting bar for the Baroness LM56/66 range of mowers has two adjusting screws which are used as follows: Height of Cut Setting Screw Groomer height setting screw. If no groomer is fitted then this screw is not used.
- Page 3 Loosen the height of cut locking nut using a 13mm spanner. Once it is loose, lightly tighten it by hand so that it is held in place but able to be moved. Repeat this on both sides of the machine. Raise the front roller up by twisting the height of cut adjuster nut anti- clockwise.
- Page 4 You now need to adjust the height of the front roller until the correct setting is achieved. To adjust the front roller height, twist this adjusting nut. Twisting it clockwise will lower the roller and twisting it anti-clockwise will raise the roller. The front roller needs to be adjusted so that with the underside of the adjusting screw head resting on the cutting surface of the...
Need help?
Do you have a question about the LM56 and is the answer not in the manual?
Questions and answers