Table of Contents
Advertisement
Quick Links
MP-802 K9-85 PG2
Wireless Digital Pet Immune PIR Detector
1. INTRODUCTION
The MP-802 K9-85 PG2 (pet immune) is a microprocessor-controlled wireless digital PIR detector
supported by the PowerMaster alarm system using PowerG two-way communication protocol.
The detector's features are as follows:
Fresnel and cylindrical lenses with uniform detection sensitivity throughout its operating range, up to 12
l
meters (39 ft).
Target Specific Imaging™ (TSI) technology is used for distinction between humans and pets weighing
l
up to 38 kg (85lb).
The advanced True Motion Recognition™ algorithm (patented) allows distinguishing between the true
l
motion of an intruder and any other disturbances which may cause false alarms.
No vertical adjustment is needed.
l
Motion event counter determines whether 1 or 2 consecutive motion events trigger an alarm.
l
Very low current consumption.
l
Microprocessor-controlled temperature compensation. Sealed black chamber provides white light
l
protection.
Front and back tamper protection.
l
The device supports temperature and light level reports according to the PowerG panel.
l
For UL installations: The detector is for use with UL listed control unit only. Pet immunity has not been
evaluated by UL.
.............
........Figure 2 - Internal View
D-306133 MP-802 K9-85 PG2 Installation Instructions
Installation Instructions
Figure 1: MP-802 K9-85 PG2
A. Enroll button
B. Light sensor
C. LEDs
D. Tamper switch
E. PIR sensor
1
Advertisement
Table of Contents
Related Manuals for Visonic MP-802 K9-85 PG2
Summary of Contents for Visonic MP-802 K9-85 PG2
- Page 1 Wireless Digital Pet Immune PIR Detector Installation Instructions 1. INTRODUCTION The MP-802 K9-85 PG2 (pet immune) is a microprocessor-controlled wireless digital PIR detector supported by the PowerMaster alarm system using PowerG two-way communication protocol. The detector's features are as follows: Fresnel and cylindrical lenses with uniform detection sensitivity throughout its operating range, up to 12 meters (39 ft).
-
Page 2: General Guidance
MP-802 K9-85 shall be installed in accordance with the Standard for Installation and Classification of Burglar and Holdup Alarm Systems, UL 681. Caution! Risk of explosion if battery is replaced by an incorrect type. Dispose of used battery according to the manufacturer's instructions. D-306133 MP-802 K9-85 PG2 Installation Instructions... - Page 3 Step Procedure Menu Enter the installer menu and select “02:ZONES/DEVICES” 02:ZONES/DEVICES ADD NEW DEVICES Select “ADD NEW DEVICES” Option – See Note [1] ↓ MODIFY DEVICES D-306133 MP-802 K9-85 PG2 Installation Instructions...
-
Page 4: Temperature Display
3. The MP-802 K9-85 PG2 detector will enter a 2 min. stability period. During this time the red LED blinks. 4. Walk-test the coverage area – see Figure 12. Walk across the far end of the coverage pattern in both directions. The red LED lights each time your motion is detected followed by 3 LED blinks. -
Page 5: Troubleshooting
EN 300220, EN 301489, EN 60950-1, EN 50130-4, EN 50131-1, EN 50131-2-2 Grade 2 Class II, EN 50130-5, EN 50131-6 Type C The MP-802 K9-85 PG2 is suitable for use in systems installed to conform to PD6662:2010 at Grade 2 and environmental CLASS II. DD243 and BS8243 Certified by Applica Test &... -
Page 6: Special Comments
10 cylinder “close” curtain lenses (20 sensitivity “creep curtains”) Figure 12 – Coverage Pattern Walk Test Max. coverage 12 x 12 m (39 x 39 ft) / 90° Pet Immunity Up to 38 kg (85 lb) D-306133 MP-802 K9-85 PG2 Installation Instructions... -
Page 7: Warranty
IN JU R Y A ND/ OR DA M AG E T O PRO PER TY OR OT H ER L O SS WH ET H ER DI R EC T, I ND I REC T, 1/08 INCIDENTAL, CONSEQUENTIAL OR OTHERWISE, BASED ON A CLAIM THAT THE PRODUCT FAILED T O FUNCTION. Email: info@visonic.com Internet: www.visonic.com © VISONIC LTD. 2016 MP-802 K9-85 PG2 D-306133 (Rev.1 8/16) D-306133 MP-802 K9-85 PG2 Installation Instructions...
Need help?
Do you have a question about the MP-802 K9-85 PG2 and is the answer not in the manual?
Questions and answers