Philips 2net Gen 2 User Manual page 11

Table 1. Sending status
Sending light
color (left light)
Flashing
GREEN
Solid
GREEN
Solid
BLUE
Flashing
ORANGE
Sending status
• Your Hub is starting up and
searching for a connection to the
network.
It can take up to 5 minutes to
i
complete the initial connection. Do
not unplug the Hub while the light
flashing
is
• Your Hub is sending data.
Your Hub is connected to the network
and is ready to send data.
Your Hub successfully sent your
medical device data to the service
provider that supplied your Hub. Both
the sending light and reading light will
solid BLUE
turn
Your Hub is unable to connect to the
network and is not ready to send data.
i Wait for up to 5 minutes to see if a
signal is found and the light turns
solid GREEN. If not, unplug the
Hub and move it to a new location
with better cellular (or WiFi)
coverage. Move all the medical
device(s) you want to use with the
Hub to the new location.
Getting to Know Your Hub
GREEN.
for 5 seconds.
(table continued on next page)
7