Download Print this page

Philips CoolSkin HQ 561 Service Manual

Advertisement

Quick Links

Service
Service
Service
!
Service
Information
Domestic Appliances and Personal Care
GENERAL
- Cool skin is a new shaving system.
The shaver features a special compartment for
cartridges containing Nivea for Men moisturising
shaving emulsion.
This emulsion is applied to the skin while shaving.
- The shaving unit can be cleaned under a running hot
tap.
The HQ156 shaving heads are made of special
stainless steel for corrosion-free cleaning with water.
Beiersdorf,
are registered trademarks of Beiersdorf AG.
Published by Philips Domestic Appliances and Personal Care
4822 729 22127
99/03
PCS 99 998
and Nivea for Men
TECHNICAL DATA
Input voltage
Motor voltage
Cell
Cell capacity
Charging indicators : 1x LED green
Charging time
Charging current
Charging device
Comfort control
Shaving heads
Shaving emulsion
MSH Coding
8851 561 00000 HQ 561
©
Printed in The Netherlands
Copyright reserved
Rechargeable shaver
HQ 561/A
CoolSkin
: 100-240 V, 50/60Hz
: 1.2 V
: 1x 4/5A NiCd
: approx. 1200 mAH
: approx. 8 hours
: 200 mA cont.
: Transformer in plug
out : approx. 5V
: fixed setting
contour following
: HQ156 - 4822 690 10152
: HQ150 - 4822 390 10156 W-EU
Subject to modification

Advertisement

loading

Summary of Contents for Philips CoolSkin HQ 561

  • Page 1 Beiersdorf, and Nivea for Men MSH Coding are registered trademarks of Beiersdorf AG. 8851 561 00000 HQ 561 © Published by Philips Domestic Appliances and Personal Care Printed in The Netherlands Copyright reserved Subject to modification 4822 729 22127 99/03...
  • Page 2 HQ 561/A CIRCUIT DESCRIPTION TROUBLESHOOTING The working of the power supply can be diagrammatically - Shaving heads do not move smoothly over the skin. represented in the following blocks: Cause: not enough Nivea for Men shaving emulsion. B1. power plug B2.
  • Page 3 NiCd NiMH Ledn Pwrs Iosc Disn 4/5A NiCd Scan SK2c-a 200-240V SK2c-b 100-130V B1 power plug B2 rectifier B3 electronic on/off switch B4 up-converter B5 motor control IC2a IC2b IC2c IC2d B6 charging circuit B7 battery B8 motor B6. Charging circuit As NiMH batteries may not be continuously loaded with a high charging current, the HQ562 has a timer IC (IC1).
  • Page 4 HQ 561/A 1 4822 479 20198 cleaning brush 14 4822 442 01692 cover PH Directions For Use 2 4822 532 13111 sealing ring 4822 442 01708 cover NOR 3 4822 441 12304 housing PH 15 4822 410 12229 release knob 4822 736 16773 NL 4822 441 12305 housing NOR 16 4822 214 13011 power module...