Controlling Uvc80/Uvc50/Uvc30 Camera; Setting The Uvc80/Uvc50/Uvc30 As The Default Camera - Yealink CP960-UVC Deployment Manual

For more information on specific features, please refer to

Controlling UVC80/UVC50/UVC30 Camera

Zoom Rooms supports basic PTZ control for your UVC80/UVC50/UVC30 camera during meeting after setting the
UVC80/UVC50/UVC30 camera as the default camera. In addition, the UVC30 also supports camera presets and auto-
framing feature.
Note: The Yealink RoomConnect plug-in running under Windows supports advanced settings for UVC80/
UVC50/UVC30 cameras. After logging in to the Windows system as an administrator, you can configure
the camera parameters including exposure, graphic , white balance mode, people counting(only applicable to
UVC30), and configuration hangup mode and camera pan direction.
For more information on how to configure camera parameters on the Yealink RoomConnect plug-in, please
refer to
Yealink RoomConnect
•

Setting the UVC80/UVC50/UVC30 as the Default Camera

•
Controlling UVC80/UVC50/UVC30 Room Camera Position
• Creating the Preset Position for UVC30
• Resetting the Preset Position for UVC30
• Renaming the Preset Position for UVC30
• Setting UVC30 Camera to Preset Position
• Enabling/Disabling Auto-framing for UVC30
Setting the UVC80/UVC50/UVC30 as the Default Camera
Procedure
1.
Tap on the touch screen.
2. Disable Lock Settings.
You need to enter the room password to change the setting.
Zoom Rooms Controller
Userguide.
| Using CP960 as Zoom Rooms Controller | 24
Features.