Viewing Logs - Sony DMW-S01NL Installation Manual

Restoring defective blocks
The Repair Defects function assigns an alternative
sector for the defective sector. The defective data
cannot be restored.
To restore defective blocks, click the Repair defects
button in the Maintenance Menu dialog.
The Repair defects dialog appears, and processing
starts for the Repair defects phase.
You can abort the processing by clicking the ABORT
button on the right side of the Repair defects dialog. If
you do so, the block is not restored.
When processing finishes, the Complete dialog
appears and the maintenance results are displayed.
Note
After this operation, please reboot the Digital Media
Workstation so that you can make the best use of the
designed system performance.

4-1-3 Viewing Logs

Events and errors that occur on a Fibre Channel
Interface Board are recorded in logs by the Disk
Monitoring Service. You can view these logs by using
the Log View function of the Disk Utility.
See page 4-11 for more information about the Disk
Monitoring Service.
Error logs
These display error data for boards, disks, and RAID
drives.
The following information is displayed.
4-9
Chapter 4 Maintenance