Advertisement
NEO SLIMLINE WALL HUNG VANITY UNIT
ASSEMBLY LIST
Neo basin
(purchased seperately)
Designer handle
Slimline drawer
Cabinet body
NEO BASIN INSTALLATION INSTRUCTIONS
No claims for damages / defects will be recognised after installation.
Prior to installation it is important to unpack and inspect your products to ensure no damage has
occurred in transit and that the product IS CORRECT.
If damage has occurred, or a visible defect exists, do not proceed with installation and contact supplier
IMMEDIATELY.
Step 1. Mark out bolt positions ensuring they are level and at the correct height.
Step 2. Installer to determine appropriate fixings, ensure wall is suitable and studs, noggins etc. are in
appropriate locations.
Step 3. Once appropriate fixings are in the wall, place basin over bolts and tighten.
See figure 1.
Figure 1.
To be installed
with micro trap
15168 (supplied).
Dimensions are approximate. Information provided in this installation is a guide only. We recommend having the product on site prior to rough in.
Plumbers, please ensure a copy of the installation Instructions is left
with the end user for future reference
Micro Trap Assembly
Above Basin
page 1 of 5
Advertisement
Table of Contents
Related Manuals for Reece OMVIVO NEO SLIMLINE WALL HUNG VANITY UNIT
Summary of Contents for Reece OMVIVO NEO SLIMLINE WALL HUNG VANITY UNIT
- Page 1 page 1 of 5 NEO SLIMLINE WALL HUNG VANITY UNIT ASSEMBLY LIST Micro Trap Assembly Neo basin (purchased seperately) Above Basin Designer handle Slimline drawer Cabinet body NEO BASIN INSTALLATION INSTRUCTIONS No claims for damages / defects will be recognised after installation. Prior to installation it is important to unpack and inspect your products to ensure no damage has occurred in transit and that the product IS CORRECT.
- Page 2 page 2 of 5 NEO SLIMLINE WALL HUNG VANITY UNIT NEO SLIMLINE CABINET INSTALLATION INSTRUCTIONS No claims for damages / defects will be recognised after installation. Prior to installation it is important to unpack and inspect your products to ensure no damage has occurred in transit and that the product IS CORRECT.
- Page 3 page 3 of 5 NEO SLIMLINE WALL HUNG VANITY UNIT Figure 4. To be installed with micro trap 15168 (supplied). Dimensions are approximate. Information provided in this installation is a guide only. We recommend having the product on site prior to rough in. Plumbers, please ensure a copy of the installation Instructions is left with the end user for future reference...
- Page 4 page 4 of 5 NEO SLIMLINE WALL HUNG VANITY UNIT NEO SLIMLINE CABINET DRAWER ADJUSTMENT INSTRUCTIONS Figure 5. Removing drawer Remove drawer by pulling fully out and then pull upward, holding the underside front Figure 6. Replacing drawer Figure 7. Adjusting drawer front ±...
- Page 5 page 5 of 5 NEO SLIMLINE WALL HUNG VANITY UNIT NEO SLIMLINE CABINET DRAWER ADJUSTMENT INSTRUCTIONS Figure 8. Replacing drawer front optional step Plumbers, please ensure a copy of the installation Instructions is left with the end user for future reference...
Need help?
Do you have a question about the OMVIVO NEO SLIMLINE WALL HUNG VANITY UNIT and is the answer not in the manual?
Questions and answers