NEC PASOLINK Training Course page 93

OPERATION
3-36
Step
Notes: Set to "on" for the following channels.
1. Restricted E1 channels by hardware, which are
indicated by "#"on the Setting display.
2. E1 channels which are not available to use when 10/
100BASE-T(X) LAN is assigned. (see Table 3-3
Applicable Traffic Channel)
3. Reserved E1 channels.
15 Enter the channel No. and press the "Enter" key to change the
setting, following channel setting is displayed,
6. Main channel usage 1-16
(1:used
5:not used
9:not used 10:not used
13:not used 14:not used
Select channel No. :
channel 1 (used:0 / not used:1) :
16 Press either "0" or "1" key and "Enter" key for setting, if not,
press the "Esc" key,
17 Press the "6" key and "Enter" key, repeat step 14 to step 16 for
each channel setting,
18 If not, press the "7" key and "Enter" key, then, following item is
displayed,
7. BER alarm threshold (10-4)
BER alarm threshold (10-3:0 ∠ 10-4:1 ∠ 10-5:2 ∠ 10-6:3):
Notes: 10-3 signifies 3 x 10
Default value is a 10
19 Press the any "0" to "3" key and "Enter" key for setting, if not,
press the "Esc" key,
Procedure
2:used 3:N/A
6:not used 7:not used
11:not used
15:not used
-3
.
-4
.
ROI-S04488
4:not used
8:not used
12:not used
16:not used)