Ryobi ERGO Original Instructions Manual
4v screwdriver
Hide thumbs
Also See for ERGO:
- Original instructions manual (176 pages) ,
- Original instructions manual (188 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Ryobi ERGO
Summary of Contents for Ryobi ERGO
- Page 1 ORIGINAL INSTRUCTIONS 4V Screwdriver ERGO...
- Page 2 Important! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical modification.
-
Page 3: Intended Use
Safety, performance, and dependability dust or fumes. have been given top priority in the design Keep children and bystanders of your screwdriver. away while operating a power tool. Distractions can cause you to INTENDED USE lose control. The product is intended to be used only by adults who have read and understood the ELECTRICAL SAFETY instructions and warnings in this manual,... - Page 4 PERSONAL SAFETY If devices are provided for the connection of dust extraction and Stay alert, watch what you are collection facilities, ensure these doing and use common sense are connected and properly used. when operating a power tool. Do Use of dust collection can reduce not use a power tool while you dust-related hazards.
- Page 5 moving parts, breakage of parts keys, nails, screws or other small and any other condition that may metal objects, that can make a affect the power tool’s operation. connection from one terminal If damaged, have the power to another. Shorting the battery tool repaired before use.
-
Page 6: Screwdriver Safety Warnings
manufacturer or authorized service damaged cords immediately. providers. Make sure cord is located so that it will not be stepped on, tripped over, SCREWDRIVER SAFETY WARNINGS come in contact with sharp edges or Hold the power tool by insulated gripping surfaces, when performing to damage or stress. -
Page 7: Battery Safety Warnings
RYOBI distributor. RESIDUAL RISKS Segregate electronic waste properly by removing integrated battery packs Even when the product is used as from the main unit before disposal. -
Page 8: Risk Reduction
filters suitable for protecting against particles from the material being 4. Switch trigger worked on. 5. Handle 6. Charger plug RISK REDUCTION 7. USB port It has been reported that vibrations 8. Charger cable from handheld tools may contribute to a condition called Raynaud’s Syndrome MAINTENANCE certain... -
Page 9: Environmental Protection
LUBRICATION Revolutions or All of the bearings in the product are reciprocations per minute Waste electrical products high grade lubricant for the life span should not be disposed of the product under normal operating of with household waste. conditions. Therefore, further Please recycle where lubrication is required. -
Page 15: Product Specifications
Input 220-240 V value Screw driving Output 500 mA Uncertainty K Battery Replacement parts Battery type Lithium Ion ERGO Right Angle 5133003692 Battery capacity 1.5Ah ERGO Offset 5133003691 Number of cell ERGO Clutch 5133003690 VIBRATION LEVEL WARNING The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 62841 and may be used to compare one tool with another. - Page 16 & springs, etc. 4. For servicing, the product must be sent or presented to a RYOBI authorised service station listed for each country in the following list of service station addresses. In some countries your local RYOBI dealer undertakes to send the product to the RYOBI service organisation.
-
Page 17: Declaration Of Conformity
Max-Eyth-Straße 10, 71364 Winnenden, Germany Herewith we declare that the product 4V screwdriver Brand: RYOBI Model number: ERGO Serial number range: 46233801000001 - 46233801999999 is in conformity with the following European Directives and harmonised standards EN 62841-1:2015, EN 62841-2-2:2014, EN 55014-1:2006+A1:2009+A2:2011,... - Page 20 Techtronic Industries GmbH Max-Eyth-Straße 10, 71364 Winnenden, Germany 961075419-02...
Need help?
Do you have a question about the ERGO and is the answer not in the manual?
Questions and answers