Advertisement
Advertisement
Table of Contents
Related Manuals for Humanscale Nap Rest
Summary of Contents for Humanscale Nap Rest
- Page 1 INSTALLATION MANUAL North America: +1 800 400 0625 Europe: +353 (0)1 858 0910...
- Page 2 (5) M3 12mm screw Clamp TOOL NEEDED FOR ASSEMBLY Philips Head Screwdriver (Not included) STEP 1 Remove the Humanscale logo plate from the main frame by lifting from the bottom and pulling it out. Set it aside for later installation.
- Page 3 Align the arrow between the “a” and “n” of the Humanscale logo on the chair and rotate the Nap Rest rearwards into position. *Do not try to realign by sliding Nap Rest along chair frame, as it may scratch the chair. WARNING:...
- Page 4 Using the allen wrench, tighten the 2 pre-installed set screws to take out any remaining slack. Do not over tighten the 2 set screws. STEP 5 Install the Humanscale logo plate onto the Nap Rest with the upper hooks going in first followed by the lower hooks. humanscale.com For our terms and conditions please go to www.humanscale.com/terms-conditions...
Need help?
Do you have a question about the Nap Rest and is the answer not in the manual?
Questions and answers