Initial Use; Switching The Fan On And Off; Oscillation; Maintenance/Cleaning - Silvercrest STV 30 A1 Operating Instructions And Safety Instructions

8. Initial use

8.1 Switching the fan on and off

Proceed as follows to put the fan into operation:
•
Place the fan on a flat, stable surface.
•
Insert the plug into a properly installed socket.
•
Switch the fan on by selecting one of the three fan levels on the control panel (12):
Level 1, weak: Press button 1.
o
Level 2, medium: Press button 2.
o
Level 3, strong: Press button 3.
o
•
Switch the fan off by pressing button 0.

8.2 Oscillation

The fan can oscillate horizontally.
•
Press the oscillation pin (9) in to start oscillation.
•
Pull the oscillation pin (9) out to stop oscillation.
You can adjust the vertical angle of the fan manually.

9. Maintenance/cleaning

DANGER! Risk of electric shock!
• Disconnect the fan from the mains before cleaning
commences.
• Do not immerse the fan in water.
• Do not allow any water or cleaning agent to enter the
fan.
SilverCrest STV 30 A1
English – 25