Page 1
User Manual Window Air Conditioner Before using your TOSOT Window Air Conditioner please read this user manual in its entirety. MO DEL NUMBERS 8,000 BTU-GJC08BU-A6NRNJ2A...
Page 2
Warranty Information 1. All TOSOT products come with a 1-year warranty from the date of purchase. 2. You can get a 6-month warranty extension by registering your new product at...
Table of Contents ------------------------------------- Safety and Instructions ------------------------------------- Installation and Setup --------------------------------------------------- Operation ------------------------------------- Electrical Information ----------------------------------------------------------- Parts ----------------------------------------------- Control Panel -------------------------------------------- Remote Control ----------------------------------- Replacing the Batteries ------------------------------ Changing the Wind Direction ---------------------------------------------------- Installation ---------------------------------------- Tools Required List ------------------------------------ Window Requirements ------------------------------------ Installation Procedure...
Safety and Instructions Please read all instructions before use and save this user manual for future reference. A digital version can be obtained by emailing us at support@tosotdirect.com. Your safety and the safety of others are very important to us. We have provided many important safety messages throughout this manual and on the appliance itself.
● Use caution when unpacking and installing as the sharp edges of the unit may cause personal injury. ● It is recommended that two people install and setup the air conditioner to avoid the unit falling out of window. ● Chemicals and other solvents which are dissolved in the air (e.g. cleaning products, hair spray, air fresheners, perfumes, etc.) may cause the product to deform and become damaged.
● No open fire (e.g. electrical heater or gas stove) should be used on or near the appliance. ● Do not direct airflow directly at room occupants, pets, or plants, as this may negatively impact health. ● Do not use the air conditioner for special use purposes; such as the preservation of precision devices, food, plants, or other irreplaceable objects as it might cause deterioration of quality.
To test your power supply cord please do the following: 1. Plug in the air conditioner. 2. The power supply cord will have two buttons on the plug head. If you press the TEST button you should notice a clicking noise as the RESET button pops out.
Control Panel Timer button On/Off button + / - button Fan button Mode button Cool mode Dual-8 display Fahrenheit unit Energy Save Dry mode mode mode Fan Only mode Filter cleaning Auto mode mode Low speed Medium speed High speed Auto speed indicator indicator...
Page 9
Fan Button Pressing this button will cycle the fan speed through one of 4 fan modes, as shown below: AUTO HIGH +/- Button ● Pressing this button will allow you to change the temperature setting. Holding either button will increase or decrease automatically. It will take 3 seconds for the temperature settings to be confirmed by the machine.
Remote Control This is a universal remote control for a variety of models. If your model does not have a function listed on the remote control, there will be no changes in the operation of your unit. The max range of the remote control is approx. 25 feet with no obstacles or interference from other devices, such as wireless phones or fluorescent lamps.
Page 11
● standard cooling mode. The set temperature and fan speed can both Cool mode: be adjusted. ● Energy Saving mode: an automatic mode to save on energy costs. The set temperature cannot be adjusted. The fan speed can be adjusted. ●...
Timer Button When the unit is running, press this button to schedule when the unit will power off by using the +/- button to adjust the length of time before powering off. When the unit is not running, press this button to schedule when the unit will power on by using the +/- button to adjust the length of time before powering on.
Changing the Wind Direction Move the adjusting rod with your fingers to change the wind direction from left to right. Move the adjusting air outlet frame to change the window direction from up to down. Fan direction adjusting rod Air outlet frame...
Installation Tools Required Phillips-head screwdriver Flat-blade screwdriver Level Scissors or knife Pencil Ruler or tape measure Air conditioner Left and right accordion panel Top mounting rail Window sill and sash seal (2) Foam top window gasket Top mounting rail seal strip Type B Lock frame(2) Accordion panel seal (2)
Window Requirements The instructions outlined below are for standard, vertical-sliding windows. If you have a different window type (e.g. horizontal-sliding window) you may need to choose a different window or use a different installation procedure. If you are installing this air conditioner in a smaller window, you may not need the accordion subassembly.
Page 16
2. Use four (4) included Type A screws to fix the top mounting rail to the outer case of the air conditioner. The flat edge with a single hole in the middle should be closest to you. Step 2: Install accordion panels 1.
Page 17
Step 3: Attach the window sill seal and sash seals 1. Cut the window sill and sash seal strips to proper length. Tear off the paper backing and stick to the lowest part of the window sill. Repeat for the top of sliding window. Window sill and sash seal Step 4: Install the air conditioner unit 1.
Page 18
Window frame windowsill Step 5: Install the window locking bracket 1. To keep the unit from falling out the window, secure the window locking bracket once the window is resting against the top mounting rail. Plastic window ooden window Step 6: Plug the gap of the top window with foam 1.
Adding Foam to Accordion Panels 1. After completing installation of your unit, measure the length between the air conditioner and the edge of the window frame. 2. Cut the included foam insulation to length. 3. Place the foam insulation along the accordion panel. If there is any excess foam, it can be tucked into the frame or trimmed off with scissors.
Proposition 65 Notice California Safe Drinking Water and Toxic Enforcement Act of 1986 requires us to notify customers that this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please wash your hands after finishing installation of this product.
Page 21
2. Remove the filter Locate the filter and remove from the air conditioner. You may need to move the filter around to loosen. 3. Clean the filter After removing, use the dust attachment of your vacuum or warm water mixed with a mild detergent.
Cleaning the outer case We recommend that you check the outer case of the air conditioner once or twice per year to look for rust or other damage. In order to reduce damage and prevent rust during the off-month, you can cover the air conditioner with plastic or other protective covering.
Troubleshooting Not all of the following problems are malfunctions. Problem Possible Causes ● Not a high enough voltage supplied from Air conditioner is not operating. your wall power outlet Controls cannot be set ● Power plug is loose or in TEST mode ●...
Malfunction Code while compressor, is still present. Overload outdoor fan, and Malfunction water condensation If that doesn’t work, tray stop operation. contact TOSOT support via email at support@tosotdirect.com Compressor stops System operation, but the Overload fan continues to Protection...
Need help?
Do you have a question about the GJC08BU-A6NRNJ2A and is the answer not in the manual?
Questions and answers
does this model have Freon?