Related Manuals for BaBylissPro ROSEFX FX788RG
Summary of Contents for BaBylissPro ROSEFX FX788RG
- Page 1 ROSEFX Operating Instructions Model FX788RG Cord/Cordless Trimmer For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS has been dropped into water. Return the appliance to a BaBylissPRO Service Center for examination and repair. When using electrical appliances, especially when children are present, basic safety 5. Keep the appliance cord away from heated surfaces. -
Page 3: On/Off Switch
4. Connect the charging jack into the receptacle on the bottom of the trimmer. Plug However, there is no guarantee that interference will not occur in a particular installation. the adapter into any electrical outlet (at the voltage listed on the label affixed to If this equipment does cause harmful interference to radio or television reception, which the adapter). -
Page 4: Blade Care
USER MAINTENANCE INSTRUCTIONS Regular Zero Gap REPLACEMENT (REMOVAL) OF BLADE SET To remove blade set from your trimmer, make sure the trimmer is in the “0” position. Remove the blade set by placing thumb against the smaller cutter and pushing forward, releasing the cutter from the trimmer housing. - Page 5 blade guide REGULAR - Resetting the blade for regular use Step 1 Step 3. Before placing the blade into the adjustment tool, use the screwdriver provided to Push the blade guide up as far as the adjustment tool loosen the tension screws, without removing them completely from the blade holder. allows, so the moving blade sits closely with the top of Place the blade into the adjustment tool in the side marked Regular.
- Page 6 LED BLUE Blinking - Charging b. LED BLUE - Fully Charged 4. Remove the BaBylissPRO name plate using a small flat screwdriver. Proceed to c. LED BLUE Flashing - 10 remove the 2 screws located under the name plate and the 2 screws towards the minutes battery left base of the housing.
- Page 7 Before using the Class 2 Power supply, read these instructions carefully. This trimmer should only be used with the supplied adapter. WARNING: Use only with adapter Model No.: C045100-A IF YOU THINK THE which is provided. Rated input voltage: 100-240V ~, 50/60Hz 0.2A POWER IS OFF WHEN Rated Output: 4.5V DC 1000mA OPERATION...
-
Page 8: Limited 2-Year Warranty
(U.S. AND CANADA ONLY) Please contact our BaBylissPRO service department by calling 1-800-326-6247. BabylissPro will repair or replace (at our option) your unit free of charge for 24 months from the date of purchase if the appliance is defective in workmanship or materials.
Need help?
Do you have a question about the ROSEFX FX788RG and is the answer not in the manual?
Questions and answers