Zero 88 LEAP FROG 48 Fitting Instructions

Fitting Instructions
INSTRUCTIONS FOR FITTING THE LEAP FROG 48/96
SMPTE/MIDI/CAN/REMOTES UPGRADE KIT
Unplug the power supply unit from the desk before removing any covers.
Appropriately qualified persons only must undertake servicing of equipment.
Zero 88 cannot accept responsibility for repairs or modifications that are not competently
executed and in accordance with service or upgrade information.
Before attempting to fit the Leap Frog 48/96 SMPTE/MIDI/CAN/Remotes Upgrade Kit to your
Leap Frog 48/96 lighting desk please read these instructions carefully.
Electrostatic discharge (ESD) can damage the circuit boards and other components. The
procedure described below should be carried out at an ESD workstation only. If such a
station is not available, wearing an antistatic wrist strap and attaching it to a metal part of the

Upgrade kit contents:

1) Leap Frog 48/96 SMPTE/MIDI/CAN/Remotes upgrade PCB
2) Spacer M4 metal hexagonal male-female 42mm
3) Screw M3 x 8mm plastite black
4) Washer M3 internal toothlock black
5) Connector identification label
Zero 88 reserves the right to make changes to the equipment described in this manual without prior notice.
This equipment is designed for professional stage lighting control, and is unsuitable for any other purpose. It should be used by, or under the supervision of, appropriately
qualified or trained persons only. E & OE
Servicing of this equipment should be attempted by suitably qualified persons only.
Zero 88
Usk House, Llantarnam Park, Cwmbran. NP44 3 HD U.K.
Tel: +44 (0) 1633 838088 Fax: +44 (0) 1633 867880
Email: sales@zero88.com Web:
Issue: 01
WARNING
desk chassis can provide some ESD protection.
www.zero88.com
Date:29/06/07
x 1
x 3
x 2
x 2
x 1
Doc. No. 7327500/Fi8319