Advertisement
Quick Links
DMX Control Modules
These instructions are provided to assure safe operation and to prolong the life of your Litepanels product.
Please read these important instructions and keep them in a safe place.
•
Clean the module with a dry cloth only.
•
Install the Module in accordance with the manufacturer's instructions.
•
Modules are only useable for Litepanels Astra family products.
•
Do not place near any heat sources such as radiators, heat registers, stoves or other apparatus that produce
heat.
•
WARNING: To reduce the risk of fire or electric shock, do not expose the fixtures to rain, moisture or other liquids.
•
Service is required when the apparatus has been damaged in any way such as:
LCD display is cracked/not clear, or the text is not readable
o
Liquid spilled into the apparatus.
o
The unit has been exposed to rain or moisture.
o
The unit has been dropped or the enclosure is damaged.
o
The unit does not operate normally or performance changes in any significant way.
o
Remove the communications module well cover on the rear panel of the Astra. This also exposes the fan control switch
on the right inner side.
Up position is FAN ON/AUTO mode. Down position is Fan OFF.
However, attaching a communication module automatically overrides the function of the manual fan switch. To connect
the communications module you just slide it into place and then push it up until it locks. The boot-up screen is the
Litepanels logo and then it changes into the home screen after it has completed boot-up.
Mounting Instructions
Vitec Videocom - Litepanels
info@vitecvideocom.com
www.litepanels.com
Advertisement
Summary of Contents for Vitec Multimedia Litepanels ASTRA 1X1
- Page 1 DMX Control Modules These instructions are provided to assure safe operation and to prolong the life of your Litepanels product. Please read these important instructions and keep them in a safe place. • Clean the module with a dry cloth only. •...
- Page 2 (Illustration shows the Astra 1x1 DMX Module with RJ45 jacks.) The home screen gives you information regarding intensity output and color temperature setting #1. On the bottom of the screen you can see the DMX channels the module is currently set at #2. The home screen shows icons at the top: an icon for the fan, temperature, and power #3.
- Page 3 Tools Settings – Edit DMX Settings Press UP/DOWN buttons to select the DMX Channel & press OK to save. Press Up or Down Displays which DMX button to highlight DMX Channel is controlling which function. Press OK ADDRESS. Press OK to go to HOME screen In DMX FAN control mode, remote DMX values between 0 and 50% turn the fan to auto.
- Page 4 Tools Settings – DISPLAY Settings Enter into TOOLS Press Up or Down Displays ALWAYS ON or Enter into BACKLITE settings . Press Up button to highlight ALWAYS OFF. Toggle TIMEOUT menu . Press OK. or Down button to LCD BACKLITE. Press between options using Press Up or Down button to highlight DISPLAY...
- Page 5 Tools Settings – SYSTEM Settings Enter into SYSTEM Enter into TOOLS Press Up or Down Displays the Light MONITOR menu . Press OK. settings . Press Up button to highlight system information This now displays the or Down button to SYSTEM INFO.
- Page 6 In case an issue arises with any of the main icon functions, e.g. a low powered battery -the corresponding icon turns red and a question mark comes up in the top right hand corner. Selecting the button next to the question mark icon will show on the screen what the issue is, in this case low input voltage due to an empty battery.
Need help?
Do you have a question about the Litepanels ASTRA 1X1 and is the answer not in the manual?
Questions and answers