Securing Nuts And Bolts; Lubrication; Ground Drive Clutch Cable Adjustment - Hayter HARRIER 56 Owner's Handbook Manual

1.29

SECURING NUTS AND BOLTS

Regularly check that all securing nuts and bolts are tight.
Replace missing or damaged items immediately.

LUBRICATION

Lubricate the wheels, pivot points and linkages with engine
oil every 25 operating hours.
Apply a good quality medium grease to the inner control
cables at the point of entry and exit from their outer casings.

GROUND DRIVE CLUTCH CABLE ADJUSTMENT

Check the clutch cable operation every 25 operating hours
and adjust if necessary. The clutch cable is adjusted correct-
ly when the belt drive just engages with the clutch lever posi-
tioned -32-38mm from the handlebar.
Unscrew the locknut and screw the adjuster as
necessary.Tighten the locknut when correctly adjusted.
IMPORTANT- PREVENT DAMAGE: ALWAYS operate
the mower with the clutch cable correctly adjusted.
ALWAYS replace damaged cables.
MAINTENANCE
1.29
CS015
CS022
32 - 38mm
CS172
1
2
CS122
1. Adjuster
2. Locknut
343046BD310100