Download Print this page

Kenwood DV-303 Service Manual page 10

Dvd vcd cd player

Hide thumbs Also See for DV-303:

DV-303

3. Insert the pickup FPC into connector FP5201 on the mod-

ule C.B.A.

4. Remove the solder from the pickup FPC's soldered short-

circuit.

5. Adjust the optical pickup tilt after removing the solder.

(Refer to page10/2-14 Optical Pickup Tilt Adjustment.)

2-13 Disassembling the Spindle Motor Unit

1. Remove the three screws.

Note

Be sure to adjust the optical pickup tilt after replacing the

spindle motor unit.

DISASSEMBLY FOR REPAIR

2-14 Optical Pickup Tilt Adjustment

Table of Contents