Advertisement
Table of Contents
The Raven Auto Trap
Model: RAV1
Assembly / Operation / Troubleshooting / Safety
DO-ALL OUTDOORS, LLC.
1207 16th Avenue, South • Nashville, TN 37212, USA
Customer Service: 1-866-SHOT-DOC
www.doalloutdoors.com
WARNING: THIS MACHINE CAN CAUSE SERIOUS INJURY OR DEATH
PLEASE READ INSTRUCTIONS AND WARNINGS BEFORE USE
Advertisement
Table of Contents
Related Manuals for Do-All Outdoors Raven Auto Trap
Summary of Contents for Do-All Outdoors Raven Auto Trap
- Page 1 The Raven Auto Trap Model: RAV1 Assembly / Operation / Troubleshooting / Safety DO-ALL OUTDOORS, LLC. 1207 16th Avenue, South • Nashville, TN 37212, USA Customer Service: 1-866-SHOT-DOC www.doalloutdoors.com WARNING: THIS MACHINE CAN CAUSE SERIOUS INJURY OR DEATH PLEASE READ INSTRUCTIONS AND WARNINGS BEFORE USE...
- Page 2 RAV1 Tools required: 14mm wrench for bolts. 13mm wrench for Nylock nuts. 17mm wrench for mounting trap to base. 5mm Alllen wrench for horse shoe/stacker poles 4mm Allen wrench for safety ring holder 2.5m Allen wrench for limit switch adjustment ASSEMBLY 1) Carefully remove trap from box.
- Page 3 OPERATION • Place trap on level ground. • Before loading, make sure toggle switch is in the off position • Load clay pigeons into stacking poles • Connect the foot pedal • Before connecting to battery, read all safety guidelines •...
- Page 4 • If you are unable to make corrections in the field, or if unit is not operating properly, please Contact 1-866-SHOTDOC For Assistance. DO NOT RETURN TO STORE Do-All Outdoors, LLC. prides itself on its customer service. Please contact us if you have any issues with our product. Customer Service: 1-866-SHOT-DOC Email: customerservice@doalloutdoors.com...
Need help?
Do you have a question about the Raven Auto Trap and is the answer not in the manual?
Questions and answers