Advertisement
•
Make sure your SmartBand 2 is dry and the sensor is clean.
Cleaning your SmartBand 2
Rinse the SmartBand 2 regularly with fresh water under a faucet and dry
completely, particularly after performing rigorous activity, heavy sweating or
exposing the device outdoors.
•
When your SmartBand 2 is in STAMINA mode, it disables automatic measurement
of pulse and stress. Make sure that the STAMINA mode in your SmartBand 2
application is turned off. You can also manually start a measurement.
To turn on/off STAMINA mode
1
From the main application screen of your Android™ device, find and tap
SmartBand 2 > > Settings.
2
Tap STAMINA mode, then drag the slider to the On/Off position.
To measure your pulse and stress manually from your SmartBand 2
1
To start measuring your pulse and stress level, double-press the power key.
The notification lights start to flash orange alternately and then together
when the reading is complete. The results are then displayed on the
SmartBand 2 and Lifelog application on your Android™ device.
2
To end the measurement, double-press the power key again.
If the SmartBand 2 cannot detect your pulse, it vibrates three times and the notification
lights start to flash alternately in orange. If the heart rate sensor fails to get a reading, adjust
the SmartBand 2's position on your wrist or clean the sensor.
5
Advertisement
