Download Print this page

Teknion Leverage Installation Manuals

Panels
Hide thumbs Also See for Leverage:

Advertisement

Quick Links

leverage
INDEX
By Section
Product
Product Name
Code
PANELS
Universal Panel - Standard
KPUT
Universal Panel - Semi-Segmented
KPUS
Universal Panel - Segmented
KPUC
Universal Panel - Segmented 30" Rail
KPUL
Conventional Panel - Standard
KPWT
Conventional Panel - Semi-Segmented
KPWS
Conventional Panel - Segmented
KPWC
Conventional Panel - Segmented 30" Rail KPWL
Elevated Panel - Standard
KPET
Elevated Panel - Semi-Segmented
KPES
Elevated Panel - Segmented
KPEC
Elevated Panel - Segmented 30" Rail
KPEL
High-Cap Elevated Panel - Standard
KPHT
Floor-Flush Panel – Standard
KPXT
Floor-Flush Panel – Semi-Segmented
KPXS
Floor-Flush Panel – Segmented
KPXC
Floor-Flush Panel – Segmented 30" Rail
KPXL
Panel Rail
KPL
Leverage Wide Panel Gasket
KGWP
Leverage Slim Panel Gasket
KGSA
Panel Add-On – Non-Symmetric
with 3" Lay-In Channel
KPOF
Panel Add-on - Symmetric w/ Cable Way KPOW
Panel Add-On for 30" High Panels –
Non-Symmetric with 3" Lay-In Channel
KPOBF
Panel Add-On for 30" Height Panel –
Symmetric with Cable Way
KPOBW
Panel Add-On – Single Glass
KPOGS TLE_102b May 2020
Panel Add-On – Double Glass
KPOGD
Panel Add-On to 30" Height Panel –
Single Glass
KPOGBS
Panel Add-On to 30" Height Panel –
Double Glass
KPOGBD
Leverage Slim Panel Gasket
KGSA
Panel Add-On Screen – Glass
KPGAN TLE_102c May 2020
Panel Add-On Screen – Glass
KPGT_ TLE_102d May 2020
Panel Add-On Screen – Glass
KPGA_
Door Panel
KPND
Privacy Screen – Flat
KPF
July 2020
Guide
Last
No.
Updated
Product Name
PANELS
TLE_101 May 2020
Panel Rail Mounting Kit – 42"
Datum Height
LYFT
Thin Panel – Standard
Thin Panel Monolithic
Thin Panel Stabilizer Foot
Add-On Screen – Translucent
PANEL CONNECTIONS & TRIMS
Mid Run 90° On-Module
Connector/Spacer
End Run 90° Connector/Spacer
Off-Module 90° Connector/Spacer
Thin Panel Connector 90°
Thin Panel End Trim
Thin Panel Intermediate End Trim
Two-Way 180° Corner Connector
Two-Way Corner Connector
Four-Way Corner Connector
Two-Way 90° Corner Connector
Two-Way 120° Connector
TLE_102a May 2020
Three-Way 120° Connector
Wood
Two-Way Int. 180° Corner Connector
Two-Way Int. 90° Corner Connector
Three-Way Corner Connector
Four -Way Corner Connector
Two-Way 180° Int. Corner Connector
Three-Way Corner Connector
Four-Way Int. Corner Connector
Two-Way 90° Int. Corner Connector
Two-Way 120° Int. Corner Connector
Three-Way 120° Int. Corner Connector
Wood
Two-Way Int. 180° Corner Connector
Two-Way Int. 90° Corner Connector
Three-Way Corner Connector
TLE_103 May 2020
TLE_104 May 2020
Product
Guide
Last
Code
No.
Updated
Product Name
PANEL CONNECTIONS & TRIMS
Panel End Trim
KPLD42 TLE_105 May 2020
Panel End Trim - Wood
Intermediate Panel End Trim
TLE_150 May 2020
Intermediate Panel End Trim - Wood
HPS
Top Trim
HPM
Top Trim - Thick
HPF
TLE_151 May 2020
Top Trim – Wood
KPC
Continuous Top Trim
TLE_201 May 2020
Continuous Top Trim - Thick
Continuous Top Trim - Wood
HCML
Panel Wall Adapter
HCEL
Panel to Panel Adapter
HCUL
TLE_202 May 2020
Two-Way Bracket for 30" High Panels 90°KPJ90
HCH9
TLE_203 May 2020
Two-Way Bracket for 30" High
HET
Panels 120°
HIT
KCC_00 TLE_205 May 2020
Two-Way Bracket for 30" High
Panels 180°
KCC_3
Three-Way Bracket for 30" High
KCC_4
Panels 90°
KCCN_90
KCC2_60 TLE_206 May 2020
Three-Way Bracket for 30" High
Panels 120°
KCC3_60
Four-Way Bracket for 30" High Panels 90°KPJ4
KCCD_00 TLE_207 May 2020
Bracket to Align Glass Panel
Add-On – Same Height
KCCD_90
Bracket to Align Glass Panel
KCCD_3
Add-On – Change in Height
KCCD_4
KCI_00 TLE_208 May 2020
KCI_3
KCI_4
KCIN_90
KCI2_60 TLE_209 May 2020
KCI3_60
KCID_00 TLE_210 May 2020
KCID_90
KCID_3
Product
Guide
Last
Code
No.
Updated
TLE_211 May 2020
KTE
KTED
KTI
KTID
KTR
KTKT
KTRD
KTRC
KTKC
KTRCD
TLE_212 May 2020
KCW
TLE_213 May 2020
KPP
TLE_214a May 2020
KPJ602 TLE_214b May 2020
TLE_214c May 2020
KPJ00
TLE_215a May 2020
KPJ3
KPJ603 TLE_215b May 2020
TLE_216 May 2020
KPOGJ1 TLE_217 May 2020
KPOGJ2
PAGE 1 OF 3

Advertisement

loading
Need help?

Need help?

Do you have a question about the Leverage and is the answer not in the manual?

Questions and answers

Summary of Contents for Teknion Leverage

  • Page 1 TLE_214c May 2020 KPXL KCC_3 KPJ00 Panel Rail Four-Way Corner Connector Three-Way Bracket for 30" High KCC_4 Leverage Wide Panel Gasket Two-Way 90° Corner Connector Panels 90° TLE_215a May 2020 KGWP KCCN_90 KPJ3 Leverage Slim Panel Gasket Two-Way 120° Connector KCC2_60 TLE_206 May 2020 Three-Way Bracket for 30"...
  • Page 2 WORKSURFACES & COUNTERTOPS WORKSURFACE SUPPORTS & ACCESSORIES KUSPBEP TLE_366 May 2020 Acoustic Element/ Acoustic Element – Source Laminate DUS to Leverage Parallel – Elevated Corridor Width TLE_250a May 2020 Rectangular Worksurface TLE_306 May 2020 DUS to Leverage Parallel – Standard...
  • Page 3 INDEX By Section Product Guide Last Product Guide Last Product Name Code Updated Product Name Code Updated LIGHTING, ELECTRICS & COMMUNICATIONS SCREENS Base Cable Clips (Lyft) TLE_501 May 2020 6mm Glass Lateral TLE_550 May 2020 HBCC GNGL Universal Light...
  • Page 4 H - 10-32x3/8'', Sheet Metal Screw, section for details regarding compatibility Truss Quad T/F BRT NIC between old and new Leverage Panels.. (KPL) x1 KGWP KGSA KPL Reference Installation Guides: No. 656 Leverage "Top Trim KTR" No. 658 Leverage "Elements VKEC, KE, KEGS, KETS, KER...
  • Page 5 Installation Guides Section: PANELS Date: May 2020 Page No: 2 of 6 Description: PANELS TLE_101 CUT GASKET OF THE HIGHER PANEL IMPORTANT NOTE: Gasket should be installed with the outer edge facing the OUTSIDE of the panel, EXCEPT when using Corridor Width Elements.
  • Page 6 Installation Guides Section: PANELS Date: Msy 2020 Page No: 3 of 6 Description: PANELS TLE_101 CONNECT PANELS LEVEL PANELS NOTE: Make sure Panels are leveled before locking Posi-Locks. STEP 2: Connect the Panels by nserting the Posi-Lock as shown above.
  • Page 7 Installation Guides Section: PANELS Date: May 2020 Page No: 4 of 6 Description: PANELS TLE_101 SECURE POSI-LOCK STEP 4: Lock the Posi-Lock as shown above.
  • Page 8 Installation Guides Section: PANELS Date: May 2020 Page No: 5 of 6 Description: PANELS TLE_101 INSTALL PANEL RAIL STEP 5: Insert the Panel Rail to the correct height. Secure the Panel Rail onto the Panel using the Screws provided.
  • Page 9 Installation Guides Section: PANELS Date: May 2020 Page No: 6 of 6 Description: PANELS TLE_101 INSTALL PANEL ELEMENTS STEP 6: Install the Panel Elements as shown above.
  • Page 10 (KTR) (KES) IMPORTANT: Gasket should ALWAYS be installed with the outer edge facing the *E - Leverage Panel *F - Teknion Panel Gasket - OUTSIDE of the panel. (KP_T, KP_S, Leverage, TOS, Transit Please refer to Installation Guide KP_C, KP_L) (Intermediate Sizes) TLE_101 for Gasket installation.
  • Page 11 Installation Guides Section: PANELS Date: May 2020 Page No: 2 of 3 Description: PANEL ADD-ON - FABRIC TLE_102a REMOVE TOP TRIM AND FABRIC ELEMENT INSERT PANEL ADD-ON STEP 1: Remove the Top Trim and Fabric Element from the Panel.
  • Page 12 Installation Guides Section: PANELS Date: May 2020 Page No: 3 of 3 Description: PANEL ADD-ON TLE_102a FASTEN SCREWS ATTACH FABBRIC ELEMENT AND TOP TRIM Working with Non-30'' Height Panels Working with 30'' Height Panels NOTE: Pre-drilled holes on 30'' Height Panels STEP 3: Secure the Panel Add-On to the Panel using Screws provided.
  • Page 13 C1 - Glass Add-On C2 - #8-18 x 3/4" Quadrex, Attachment Bracket Pan Hd, Self Drilling Screw (A15-8535) x1 KPOGBS (E01-0072) x1 *D - Teknion Panel Gasket - Leverage,TOS, Transit (Intermediate Sizes) KPOGBD (B03-0250-X) x2 Slim Panel Gasket - Leverage (B03-2337-X) x2 E - Panel Clamp/Alignment Kit Panels up to 42"...
  • Page 14 Installation Guides Section: PANELS Date: May 2020 Page No: 2 of 6 Description: PANEL ADD-ON TLE_102b INSERT PANEL ADD-ON NOTE1: Ensure panels are leveled before Panel Add-On installation. NOTE2: Orient reveal lines towards the inside of cubicle space OR to face same direction.
  • Page 15 Installation Guides Section: PANELS Date: May 2020 Page No: 3 of 6 Description: PANEL ADD-ONS TLE_102b ATTACH SCREWS When working with non-30'' Height Standard Panel For KPOGS and KPOGD Panel Add-Ons STEP 2a: Secure the Panel Add-On to the Panel using the Screws provided as shown above.
  • Page 16 Installation Guides Section: PANELS Date: May 2020 Page No: 4 of 6 Description: PANEL ADD-ON TLE_102b ATTACH SCREWS Note the pre-drilled holes on the 30'' Height Panels. For KPOGBS and KPOGBD Panel Add-Ons Ensure Panel and Add-On are aligned properly before lightening the screws.
  • Page 17 Installation Guides Section: PANELS Date: May 2020 Page No: 5 of 6 Description: PANEL ADD-ONS TLE_102b ADD ATTACHMENT KIT Add-On not shown NOTE: Attachment Kit can be added to either Panel. Panel Rail Cross Section Views STEP 3: Attach the Bracket to the Panel using Screws provided.
  • Page 18 Installation Guides Section: PANELS Date: May 2020 Page No: 6 of 6 Description: PANEL ADD-ONS TLE_102b INSERT POSI-LOCKS FOR PANEL ADD-ONS AT CORNER CONNECTIONS PANEL ADD-ONS at CORNER CONNECTIONS Add-Ons Two-Way 90° Add-Ons Two-Way 120° Add-Ons Three-Way 180° Corner Connection...
  • Page 19 (6mm Tempered Glass: H01-0926-X Clear Satin Etched Tempered Glass: H02-0390-X Frost Etched Tempered Glass: H02-0389-X ) x1 B - Leverage Add-On Top Trim Cut Lengths (A23-3348-X) x2 KPGAN C - Top Trim Connection Clip (A23-3348-X) x2 D1 - Trim Fastener...
  • Page 20 Installation Guides Section: PANELS Date: May 2020 Page No: 2 of 5 Description: PANEL ADD-ON SCREEN TLE_102c LOOSEN BUTTON HEAD SCREWS INSERT GLASS NOTE: Make sure the edge of the Glass Plate lines up with the Metal Rail. STEP 1: Loosen the Head Socket Button Head Screws along the side of the Extrusion.
  • Page 21 INSTALL PANEL ADD-ON SCREEN STEP 3: Slide in the Trim Fasteners into the Bottom Track of the sub-assembly. STEP 4a: Drop the Panel Add-On Screen on top of the Leverage Frame, lock in place with the Spring Clip and Lock Nuts provided.
  • Page 22 Installation Guides Section: PANELS Date: May 2020 Page No: 4 of 5 Description: PANEL ADD-ON SCREEN TLE_102c INSTALL COMPATIBILITY KIT (ON PANELS MANUFACTURED BEFORE JUNE 2011) Old Panel New Panel STEP 4b: Place Compatibility Spacer Plate inside the channel, close to the Trim Fasteners.
  • Page 23 Installation Guides Section: PANELS Date: May 2020 Page No: 5 of 5 Description: PANEL ADD-ON SCREEN TLE_102c MULTIPLE PANEL ADD-ON SCREEN GLASS INSTALLATION STEP 4c: For multiple Panel Add-On Glass Screens, connect them using the Top Trim Connection Clip. Install the assembly onto the Panels.
  • Page 24 KPGTK or KPGAK - Both Extended - One Side Notched B1 - Alignment Clip 6mm Glass (B02-0395) x varies* B2 - Special - Leverage Glass Blade Retainer 2-way 180 (B02-0363) x varies* KPGTE or KPGAE KPGTN or KPGAN - One Side Extended...
  • Page 25 Installation Guides Section: PANELS Date: May 2020 Page No: 2 of 8 Description: PANEL ADD-ON SCREEN TLE_102d LOOSEN HEAD SCREWS INSERT GLASS STEP 1: Loosen the Hex Socket Button Head screws alongthe side of the extrusion. STEP 2: Insert Glass into extrusion making sure edge of glass plate lines up with metal rail as...
  • Page 26 INSTALL PANEL ADD-ON SCREEN STEP 3: Slide in the Trim Fasteners into the bottom track of the sub-assembly. STEP 4a: Drop the Panel Add-On Screen on top of the Leverage Frame and lock in place with the SpringClip and Lock Nuts provided.
  • Page 27 Installation Guides Section: PANELS Date: May 2020 Page No: 4 of 8 Description: PANEL ADD-ON SCREEN TLE_102d COMPATIBILITY KIT INSTALLATION ON PANELS MANUFACTURED BEFORE JUNE 2011 Old Panel New Panel STEP 4b: Place Compatibility Spacer Plate inside the channel,close to the Trim Fasteners.
  • Page 28 Installation Guides Section: PANELS Date: May 2020 Page No: 5 of 8 Description: PANEL ADD-ON SCREEN TLE_102d MULTIPLE PANEL ADD-ON GLASS SCREENS INSTALLATION STEP 4c: For multiple Panel Add-On Glass Screens, connect them using the Top Trim Connection Clip. Install the assembly onto the Panels.
  • Page 29 Installation Guides Section: PANELS Date: May 2020 Page No: 6 of 8 Description: PANEL ADD-ON SCREEN TLE_102d PANEL ADD-ON GLASS SCREEN INSTALLATION (CONTINUED) Front View Top View 1/16'' 1/16'' NOTE: Please leave a 1/16" gap between Glass Metal Sub-Assembly when installing multiple Panel Frames with no Knotch or Extended Glassside by side.
  • Page 30 Installation Guides Section: PANELS Date: May 2020 Page No: 7 of 8 Description: PANEL ADD-ON SCREENS TLE_102d INSTALL ALIGNMENT CLIPS INSTALL ALIGNMENT CLIPS STEP 5a: Install Alignment Clips on side to side applications when there is no Notched or...
  • Page 31 Installation Guides Section: PANELS Date: May 2020 Page No: 8 of 8 Description: PANEL ADD-ON SCREEN TLE_102d PANEL ADD-ON GLASS SCREEN - EXTENDED GLASS CORNER APPLICATION NOTE: Always install 90° Corner Cover Trim together with the Panel Add-On Glass Screen when Extended Glass Screens meet at the corner. The Cap of the Corner Cover has to engage into...
  • Page 32 B - RH/LH Door Latch Frame Assembly (N02-0541X) x1 C - RH/LH Door Hinge Frame Assembly (N02-0542X) x1 D - Leverage Door Top Frame (A23-0685) x1 E - #8-18 x 3/4'' Self Drilling Quadrex, Pan Head (E01-0072) x4 F - Corner Bracket...
  • Page 33 Q - Leverage Top Cap Kit 2-Way 90° and 180° (X01-1689) x1 K - End Trim Sub-Assembly (N02-0497) x2 R - Leverage Full Panel End Gasket (B11-0178) x4 *S - Panel Add-On (KPO) L - Door Bracket Assembly (Clips B02-0132 and Rivets...
  • Page 34 Installation Guides Section: SECTIONS Date: May 2020 Page No: 3 of 12 Description: DOORS TLE_103 INSTALL ADD-ON PANEL ADJUST PANEL HEIGHT 81'' 1/2'' STEP 1: Remove the One Splicer Plate from the Add-On Panel. Place the Add-On Panel on STEP 2: Adjust the Panel height using the wrench so that it is 1/2 '' above the ground.
  • Page 35 Installation Guides Section: PANELS Date: May 2020 Page No: 4 of 12 Description: DOORS TLE_103 INSTALL END TRIM GASKETS ASSEMBLE DOOR FRAME Install the End Trim Gaskets STEP 3: Insert the End Trim Gaskets as shown above. STEP 4: Assemble the Door Frame using the Screws provided as shown above.
  • Page 36 Installation Guides Section: PANELS Date: May 2020 Page No: 5 of 12 Description: DOORS TLE_103 INSERT THRESHOLD PLATE SECURE DOOR FRAME NOTES: Use Screws(B*) on Door Latch Frame Assembly(B) to fasten Clamps and Frames. * Do Not tighten fasteners until Threshold is installed.
  • Page 37 Installation Guides Section: PANELS Date: May 2020 Page No: 6 of 12 Description: DOORS TLE_103 FASTEN DOOR BRACKETS INSERT PANEL INTO DOOR BRACKETS NOTES: Use Screws on Door Hinge Frame Same as Step 3 Assembly (C) to fasten Clamps and Frames.
  • Page 38 TLE_103 HOOK DOOR BOTTOM CORNER SUPPORT NOTE: Engage and hook Door Bottom Corner Support Plate when connecting a new Leverage Panel to an existing Leverage Panel. NOTE: Engage and hook Door Bottom Corner Support Plate when connecting a new Leverage Panel to an existing Leverage Panel.
  • Page 39 Installation Guides Section: PANELS Date: May 2020 Page No: 8 of 12 Description: DOORS TLE_103 INSTALL TOP CAP KIT INSTALL TOP TRIM STEP 10: Install the Top Cap Kit as shown above. STEP 11: Insert the Top Trims onto the Panels aas shown above.
  • Page 40 Installation Guides Section: PANELS Date: May 2020 Page No: 9 of 12 Description: DOORS TLE_103 INSTALL END TRIM SUB-ASSEMBLY NOTE: Engage End Trims into Bottom Plate first. Then snap into Door Bracket Assembly. STEP 12: Insert the End Trim Sub-Assembly into the Bottom Corner Support as shown above.
  • Page 41 Installation Guides Section: PANELS Date: May 2020 Page No: 10 of 12 Description: DOORS TLE_103 INSERT DOOR INSTALL STANLEY HINGES Door Substrate Door Frame (C) STEP 13: Insert the Door into the Door Frame. STEP 14: Secure the Door onto the Door Frame using the Screws provided.
  • Page 42 Installation Guides Section: PANELS Date: May 2020 Page No: 11 of 12 Description: DOORS TLE_103 INSTALL DOOR LATCH FRAME STEP 15: Insert the Door Latch Frame using the Screws provided.
  • Page 43 Installation Guides Section: PANELS Date: May 2020 Page No: 12 of 12 Description: DOORS TLE_103 INSTALL DOOR HANDLE STEP 16: Install the Door Handle using the Screws provided in the Handle Kit.
  • Page 44 Installation Guides Section: PANELS Date: May 2020 Page No: 1 of 9 Description: PRIVACY SCREEN TLE_104 Rev. No: 01 Privacy Screen - Flat (KPF) Part and Product Identification A - Privacy Screen (KPF) x1 B - Side Stop Cover...
  • Page 45 Installation Guides Section: PANELS Date: May 2020 Page No: 2 of 9 Description: PRIVACY SCREEN TLE_104 REMOVE PANEL COVERS INSERT PRIVACY SCREEN STEP 1a: For standard and corridor width panels, emove the Panel Covers as shown above. STEP 1b: Insert the Privacy Screen to the Panel as shown above.
  • Page 46 Installation Guides Section: PANELS Date: May 2020 Page No: 3 of 9 Description: PRIVACY SCREEN TLE_104 FASTEN SCREWS STEP 1c: Secure the Top Bracket of the Privacy Screen onto the Panel Rail using the Screws provided.
  • Page 47 Installation Guides Section: PANELS Date: May 2020 Page No: 4 of 9 Description: PRIVACY SCREEN TLE_104 REMOVE FLOOR FLUSH ELEMENT INSERT PRIVACY SCREEN 6" Baseboard Element Floor Flush Element STEP 2a: For the Panels with Floor Flush Elements, remove the Floor Flush Element. Insert STEP 2b: Insert the Privacy Screen into the Panel as shown above.
  • Page 48 Installation Guides Section: PANELS Date: May 2020 Page No: 5 of 9 Description: PRIVACY SCREEN TLE_104 FASTEN SCREWS STEP 2c: Secure the Top Bracket of the Privacy Screen onto the Panel Rail using the Screws provided.
  • Page 49 Installation Guides Section: PANELS Date: May 2020 Page No: 6 of 9 Description: PRIVACY SCREEN TLE_104 SECURE BOTTOM BRACKET INSERT SPRING CLIP STEP 2d: Secure the Bottom Bracket of the Privacy Screen onto the Panel using the Screws STEP 2e: Cut the Drop Flange on the Panel Element. Insert the Spring Clip as shown above.
  • Page 50 Installation Guides Section: PANELS Date: May 2020 Page No: 7 of 9 Description: PRIVACY SCREEN TLE_104 RE-INSERT FLOOR FLUSH ELEMENT INSTALL SIDE STOP COVER STEP 2f: Re-insert the Floor Flush Element as shown above. STEP 2g: Install the Side Stop Cover as shown above. Re-insert the Top Element.
  • Page 51 Installation Guides Section: PANELS Date: May 2020 Page No: 8 of 9 Description: PRIVACY SCREEN TLE_104 REMOVE TOP ELEMENT AND SIDE STOPS LOOSEN SIDE STOPS NOTE: Installation steps are shown for changing the sliding direction from Right to Left as an example.
  • Page 52 Installation Guides Section: PANELS Date: May 2020 Page No: 9 of 9 Description: PRIVACY SCREEN TLE_104 RE-INSTALL TOP ELEMENT AND SIDE STOP COVER Right Slide Left Slide STEP 3c: Re-install the Side Stops and the Side Stop Cover using the Screws provided. Place the Top Element on top of the Panel Rail. (Illustrations of Left and Right Slide is shown above.)
  • Page 53 Installation Guides Section: PANELS Date: May 2020 Page No: 1 of 4 Description: PANEL RAIL MOUNTING KIT TLE_105 Rev. No: 01 Panel Rail Mounting Kit – 42" Datum Height (KPLD42) Part and Product Identification A - 42" Datum Height Bracket...
  • Page 54 Installation Guides Section: PANELS Date: May 2020 Page No: 2 of 4 Description: PANEL RAIL MOUNTING KIT TLE_104 INSERT DATUM HEIGHT BRACKET STEP 1: Insert the Datum Height Brackets into the desired slots of the Panel as shown above.
  • Page 55 Installation Guides Section: PANELS Date: May 2020 Page No: 3 of 4 Description: PANEL RAIL MOUNTING KIT TLE_105 PLACE PANEL RAIL STEP 2: Place the Panel Rail on the Brackets as shown above.
  • Page 56 Installation Guides Section: PANELS Date: May 2020 Page No: 4 of 4 Description: PANEL RAIL MOUNTING KIT TLE_105 FASTEN SCREWS STEP 3: Secure the Panel Rail onto the Panel using the Screws provided.
  • Page 57 Installation Guides Section: LYFT Date: May 2020 Page No: 1 of 5 Description: THIN PANELS TLE_150 Rev. No: 01 Thin Panel - Standard (HPS), Thin Panel - Motholithic (HPM), Thin Panel Part and Product Identification Stabilizer Foot (HPF) A1 - Thin Panel - Standard...
  • Page 58 Installation Guides Section: LYFT Date: May 2020 Page No: 2 of 5 Description: THIN PANELS TLE_150 INSERT PANEL KEY SECURE PANELS STEP 1: Remove the Panel Cover. Insert the Panel Key into the side of the Panel as shown STEP 2: Secure the Panels using the Screws provided as shown above.
  • Page 59 Installation Guides Section: LYFT Date: May 2020 Page No: 3 of 5 Description: THIN PANELS TLE_150 INSERT CONNECTOR INSTALL PANEL COVERS STEP 3: Insert the Panel Connector as shown above. STEP 4: Re-install the Panel Cover as shown above.
  • Page 60 Installation Guides Section: LYFT Date: May 2020 Page No: 4 of 5 Description: THIN PANELS TLE_150 STEP 5: Remove the Leveler at unsupported end as shown above. STEP 6: Insert the Fastener with Weld Nut into the Panel Post.
  • Page 61 Installation Guides Section: LYFT Date: May 2020 Page No: 5 of 5 Description: THIN PANELS TLE_150 INSERT STABILIZER FOOT LEVELER STEP 7: Insert the Stabilizer Foot Leveler.
  • Page 62 Installation Guides Section: LYFT Date: May 2020 Page No: 1 of 3 Description: ADD-ON SCREEN TLE_151 Rev. No: 01 Add-On Screen - Translucent (KPC) Part and Product Identification A - Casual Panel Add-On Substrate Sub-Assembly (N09-2810) x1 B - Foot Sub-Assembly...
  • Page 63 Installation Guides Section: LYFT Date: May 2020 Page No: 2 of 3 Description: ADD-ON SCREEN TLE_151 REMOVE ELEMENTS INSERT FOOD SUB-ASSEMBLY STEP 1: Remove the Elements from the Panels as shown above. ATTACH BUMPERS STEP 2: Attach the Bumpers to the Foot Sub-Assembly as shown above.
  • Page 64 Installation Guides Section: LYFT Date: May 2020 Page No: 3 of 3 Description: ADD-ON SCREEN TLE_151 INSTALL ADD-ON SCREEN STEP 4: Install the Add-On Screen as shown above. Re-install the Elements.
  • Page 65 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 1 of 13 Description: MODULE CONNECTOR / SPACER TLE_201 Rev. No: 1 Mid-Run 90 deg on Module Connector/Spacer (HCML), End-Run 90 deg Part and Product Identification Connector/Spacer (HCEL), Off-Module 90 deg Connector/Spacer (HCUL)
  • Page 66 Pan Head, Quadrex, Black (B02-0151) x4 (E07-0012) x4 B6 - End Cover Sub-assembly C5 - 1/4-20 x 17mm Joint Connector Nut (N09-0779-X) x1 (E03-0129) x1 C6 - Bottom Bracket Sub-assembly Off-Module B7 - Leverage Full Panel End Gasket (N09-0762) x1 (B11-0178-X) x2...
  • Page 67 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 3 of 13 Description: MODULE CONNECTOR / SPACER TLE_201 INSTALL TOP AND BOTTOM BRACKET INSTALL TOP CAP NOTE: On-Module 90 deg Mid-Run Connection (HCML) Installation only. STEP 1a: Secure Spine Panel Spacer Bracket and Posi-Lock and Spring Kit as shown.
  • Page 68 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 4 of 13 Description: MODULE CONNECTOR / SPACER TLE_201 INSTALL TOP CAP Friction Fitted Top Cap STEP 3a: Install Top Cap as shown.
  • Page 69 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 5 of 13 Description: MODULE CONNECTOR / SPACER TLE_201 SECURE CORNER BRACKET REMOVE TOP CAP AND ADJUST LEVELER NOTE: Leveler is to be 1 inch out STEP 4a: Secure Corner Bracket using the provided Screws.
  • Page 70 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 6 of 13 Description: MODULE CONNECTOR / SPACER TLE_201 INSTALL TOP AND BOTTOM BRACKET INSTALL TOP CAP Top Bracket Plan View Bottom Bracket STEP 6a: Secure Top and Bottom Bracket using Screws provided.
  • Page 71 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 7 of 13 Description: MODULE CONNECTOR / SPACER TLE_201 INSTALL PANEL INTALL ANTI-DISLODGEMENT CLIP STEP 8a: Slide Top and Bottom Brackets into the slots as shown. STEP 9a: Level Panel then install Anti-dislodgement Clip...
  • Page 72 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 8 of 13 Description: MODULE CONNECTOR / SPACER TLE_201 INSTALL PANEL END GASKET SECURE CORNER BRACKETS NOTE: On-Module 90 deg End-Run Connection (HCEL) Installation only. STEP 1b: Install Panel End Gasket as shown.
  • Page 73 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 9 of 13 Description: MODULE CONNECTOR / SPACER TLE_201 INSERT ANTI-DISLODGEMENT CLIP INSTALL END COVER STEP 3b: Insert Anti-Dislodgment Clip and Level the Panel STEP 4b: Snap on End Cover as shown.
  • Page 74 Description: MODULE CONNECTOR / SPACER TLE_201 SECURE CORNER BRACKET REMOVE TOP CAP AND ADJUST LEVELER NOTE: Lyft to Leverage Off-Module Connection (HCUL) only. NOTE: Leveler is to be 1 inch out STEP 1c: Secure Corner Bracket using the provided Screws.
  • Page 75 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 11 of 13 Description: MODULE CONNECTOR / SPACER TLE_201 INSTALL TOP AND BOTTOM BRACKET INSTALL TOP CAP Top Bracket Plan View Bottom Bracket STEP 3c: Secure Top and Bottom Bracket using Screws provided.
  • Page 76 MODULE CONNECTOR / SPACER TLE_201 INSTALL PANEL INSTALL WORKSURFACE STEP 5c: Remove Top Trim and Install Panel as shown. STEP 6c: Install all related Worksurfaces and supports to Leverage Panels to act as guide for final attachment of Lyft Panel to spine.
  • Page 77 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 13 of 13 Description: MODULE CONNECTOR / SPACER TLE_201 SECURE TOP AND BOTTOM BRACKETS INSTALL TOP TRIM STEP 7c: Secure top and bottom Brackets using the provided Screws.
  • Page 78 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 1 of 6 Description: THIN PANEL CONNECTOR INSTALLATION TLE_202 Rev. No: 1 Thin Panel Connector 90° (HCH9) Part and Product Identification HCH92 A1 - Two-Way 90° Corner...
  • Page 79 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 2 of 6 Description: THIN PANEL CONNECTOR INSTALLATION TST_202 REMOVE TOP CAPS AND LEVEL INSTALL END TRIM AND TOP CAP NOTE: Installation for Two-Way 90° Corner Connection (STEP 1 to STEP 3).
  • Page 80 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 3 of 6 Description: THIN PANEL CONNECTOR INSTALLATION TLE_202 REMOVE TOP CAPS AND LEVEL INSTALL END TRIM AND TOP CAP NOTE: Installation for Three-Way 90° Corner Connection (STEP 1 to STEP 3).
  • Page 81 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 4 of 6 Description: THIN PANEL CONNECTOR INSTALLATION TLE_202 REMOVE TOP CAPS INSTALL FOUR WAY HUB NOTE: Installation for Three-Way 90° Corner Connection (STEP 1 to STEP 5).
  • Page 82 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 5 of 6 Description: THIN PANEL CONNECTOR INSTALLATION TLE_202 INSTALL THREE WAY CORNER CONNECTOR INSTALL TWO WAY CORNER CONNECTOR 4" STEP 3: Slide Three-Way Corner Connector about 4" from the top and secure.
  • Page 83 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 6 of 6 Description: THIN PANEL CONNECTOR INSTALLATION TLE_202 INSTALL TOP CAP STEP 5: Once the Four-Way Corner Connection is complete, check levels. For change in height applications insert LYFT Intermediate End Trims where required.
  • Page 84 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 1 of 2 Description: PANEL TRIMS INSTALLATION TLE_203 Rev. No: 1 Thin Panel End Trim (HET) and Thin Panel Intermediate Trim (HIT) Part and Product Identification A - Thin Panel End Trim...
  • Page 85 Installation Guides Section: PANEL CONNECTION AND TRIMS Date: May 2020 Page No: 2 of 2 Description: PANEL TRIMS INSTALLATION TLE_203 INSTALL TRIMS TO PANEL INSTALL TRIM TO PANEL STEP 1a: Install Trims as shown. STEP 1b: Install Trim as shown.
  • Page 86 Part and Product Identification (KCCN_00), Three-Way Connector (KCC_3), Four-Way Connector (KCC_4) A1 - 90 deg Corner Cover Trim (N09-1730) x1 A2 - Leverage Full Panel Corner Gasket (B11-0215-X) x1 - Full Panel Slim Corner Gasket (B11-0574-X) x1 A3 - Leverage Full Panel End Gasket...
  • Page 87 Part and Product Identification Part and Product Identification Part and Product Identification B1 - Panel End Trim C1 - Panel End Trim D1 - Leverage Full Panel Corner Gasket (N02-0497-X) x2 (N02-0497-X) x1 (B11-0215-X) x4 B2 - Leverage Full Panel End Gasket...
  • Page 88 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 3 of 11 Description: PANEL CONNECTIONS TLE_205 SECURE CORNER BRACKETS REMOVE TRIMS Back Front View View STEP 2: Remove Trims as shown. INSTALL GASKETS STEP 1: Secure Corner Bracket, Posi Locks and Spring Plate Kit with the Panels STEP 3: Install Full Panel Corner Gaskets and Full Panel End Gasket as shown.
  • Page 89 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 4 of 11 Description: PANEL CONNECTIONS TLE_205 LEVEL PANELS AND LOCK POSI-LOCKS STEP 4: Level the Panels then lock Posi-Locks...
  • Page 90 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 5 of 11 Description: PANEL CONNECTIONS TLE_205 INSTALL BOTTOM BRACKET STEP 5: Install Bottom Bracket as shown. NOTE: For 81 and 75 High Leverage 2-Way 90 Corner only...
  • Page 91 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 6 of 11 Description: PANEL CONNECTIONS TLE_205 INSTALL CORNER COVER TRIM Top View STEP 6: Install Corner Cover Trim as shown.
  • Page 92 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 7 of 11 Description: PANEL CONNECTIONS TLE_205 SECURE TOP TRIM CONNECTION CLIP AND NUT INSTALL EXTENDED GLASS ADD-ON SCREEN Extended Glass Add -On Screen Panels not Shown...
  • Page 93 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 8 of 11 Description: PANEL CONNECTIONS TLE_205 INSTALL ELEMENTS STEP 8: Install Elements as shown.
  • Page 94 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 9 of 11 Description: PANEL CONNECTIONS TLE_205 REMOVE CONNECTOR CLIP INSTALL CORNER COVER TRIM NOTE: Change in Height Installation only Top View Underside View STEP 1b: Remove a Connector Clip from the side where the height change takes place.
  • Page 95 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 10 of 11 Description: PANEL CONNECTIONS TLE_205 INSTALL BOTTOM PLATE INSTALL PANEL TRIM NOTE: Bottom Plate and Trim Installation for KCC_3 STEP 1c: Install Bottom Plate by engaging Plate's hook into Panel's cutout.
  • Page 96 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 11 of 11 Description: PANEL CONNECTIONS TLE_205 INSTALL BOTTOM PLATE INSTALL PANEL TRIM NOTE: Bottom Plate and Trim Installation for KCC_00 STEP 1d: Install Bottom Plate by placing the flange of the Plate on the top of Panel edge STEP 2d: Install Panel End Trim as shown.
  • Page 97 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 1 of 5 Description: 120 DEG CONNECTOR INSTALLATION TLE_206 Rev. No: 1 Two-Way 120 Deg Connector (KCC2_60), Three-Way 120 Deg Connector Part and Product Identification (KCC3_60) A - 120 deg Corner Top Cap Kit...
  • Page 98 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 2 of 5 Description: 120 DEG CONNECTOR INSTALLATION TLE_206 SECURE POSI-LOCK AND 120 DEG BRACE LOCK POSI-LOCK NOTE: Lock only one side STEP 2: Lock Posi-Lock as shown.
  • Page 99 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 3 of 5 Description: 120 DEG CONNECTOR INSTALLATION TLE_206 SECURE POSI-LOCK INSTALL INNER AND OUTER COVER STEP 5: Install Inner and Outer Cover. INSTALL END TRIM CLIP STEP 4: Secure Posi-Lock as shown.
  • Page 100 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 4 of 5 Description: 120 DEG CONNECTOR INSTALLATION TLE_206 INSTALL TOP CAP INSTALL TOP TRIMS Panels not shown Panels not shown 1/32" Gap 1/32" Gap Top View STEP 7: Install Top Cap as shown.
  • Page 101 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 5 of 5 Description: 120 DEG CONNECTOR INSTALLATION TLE_206 INSTALL ELEMENTS STEP 9: Install Elements as shown.
  • Page 102 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 1 of 11 Description: CORNER CONNECTIONS - WOOD INSTALLATION TLE_207 Rev. No: 1 Two-Way Connector 180 Deg - Wood (KCCD_00), Three-Way Connector - Wood (KCCD_3), Two-Way Connector 90...
  • Page 103 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 2 of 11 Description: CORNER CONNECTIONS - WOOD INSTALLATION TLE_207 Rev. No: 1 Part and Product Identification KCCD_00 KCCD_90 KCCD_3 KCCD_4 36" - 51" 57", 66" 75", 81" 36" - 51" 57", 66" 75", 81" 36" - 51" 57", 66" 75", 81" 36" - 51" 57", 66" 75", 81"...
  • Page 104 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 3 of 11 Description: CORNER CONNECTIONS - WOOD INSTALLATION TLE_207 Rev. No: 1 Part and Product Identification KCCD_00 KCCD_90 KCCD_3 KCCD_4 36" - 51" 57", 66" 75", 81" 36" - 51" 57", 66" 75", 81" 36" - 51" 57", 66" 75", 81" 36" - 51" 57", 66" 75", 81"...
  • Page 105 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 4 of 11 Description: CORNER CONNECTIONS - WOOD INSTALLATION TLE_207 REMOVE EXISTING PANEL GASKET INSTALL CORNER GASTKET STEP 1: Remove Existing Panel Gasket as shown. STEP 2: Install Corner Gasket as shown.
  • Page 106 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 5 of 11 Description: CORNER CONNECTIONS - WOOD INSTALLATION TLE_207 LOCK POSI-LOCKS NOTE: Make sure Panels are leveled before locking Posi-Locks STEP 3: Lock Posi-Locks as shown.
  • Page 107 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 6 of 11 Description: CORNER CONNECTIONS - WOOD INSTALLATION TLE_207 INSTALL INNER COVER INSTALL CORNER SUB-ASSEMBLY STEP 4: Install Inner Cover as shown. STEP 5: Install Corner Sub-Assembly as shown.
  • Page 108 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 7 of 11 Description: CORNER CONNECTIONS - WOOD INSTALLATION TLE_207 INSTALL CORNER CAP INSTALL TOP TRIMS Top Trim Connection Clip and Nut 1/32" 1/32" 1/32" STEP 6: Install Corner Cap as shown.
  • Page 109 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 8 of 11 Description: CORNER CONNECTIONS - WOOD INSTALLATION TLE_207 INSTALL PANEL GASKET INSTALL CORNER SUB-ASSEMBLY NOTE: Two-Way 90 Deg Corner Connection Installation STEP 1b: Install Panel Gasket as shown.
  • Page 110 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 9 of 11 Description: CORNER CONNECTIONS - WOOD INSTALLATION TLE_207 INSTALL ELEMENTS STEP 3b: Install Elements...
  • Page 111 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 10 of 11 Description: CORNER CONNECTIONS - WOOD INSTALLATION TLE_207 BREAK OFF CORNER CAP INSTALL CORNER SUB-ASSEMBLY NOTE: Change in Height Installation STEP 1c: Break off Corner Cap as shown...
  • Page 112 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 11 of 11 Description: CORNER CONNECTIONS - WOOD INSTALLATION TLE_207 INSTALL TOP TRIM STEP 3c: Install Top Trim as shown.
  • Page 113 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 1 of 7 Description: INTERMEDITAE CONNECTORS INSTALLATION TLE_208 Rev. No: 1 Two-Way 180 Deg Intermediate Corner Connector (KCI_00), Three-Way Intermediate Corner Connector (KCI_3), Four-Way Intermediate Corner Connector (KCI_4), Two-Way 90 Deg Intermediate Corner Connector (KCIN_90)
  • Page 114 A - Intermediate Panel End Trim (N02-0627-X) B - 90 Deg Intermediate Corner Trim (N09-1729X) Top Trim Connection Clip (B02-0362)/Nut (E03-0416) C - Leverage Top Trim to Intermediate Trim Connecting Pin (B02-0207) D - Leverage Intermediate End Gasket (B11-0179-X) Intermediate Slim End Gasket...
  • Page 115 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 3 of 7 Description: INTERMEDITAE CONNECTORS INSTALLATION TLE_208 SLIDE ADD-ON PANELS IN PLACE SECURE ADD-ON PANELS STEP 1: Slide add-on Panels in place. STEP 2: Secure add-on Panels with fasteners provided.
  • Page 116 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 4 of 7 Description: INTERMEDITAE CONNECTORS INSTALLATION TLE_208 SLIDE CORNER BRACKET IN PLACE SECURE CORNER BRACKET Front View Back View STEP 3: Put Corner Bracket in place.
  • Page 117 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 5 of 7 Description: INTERMEDITAE CONNECTORS INSTALLATION TLE_208 SECURE POSI-LOCKS LOCK POSI-LOCKS STEP 4b: Secure Posi-Locks STEP 5: Lock Posi-Locks as shown. NOTE: When more than one Corner Bracket is required, always use Connection Hardware Kit...
  • Page 118 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 6 of 7 Description: INTERMEDITAE CONNECTORS INSTALLATION TLE_208 INSTALL GASKETS INSTALL TRIMS STEP 6: Install Panel Gaskets as shown. STEP 7: Install Corner and Top Trim as shown.
  • Page 119 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 7 of 7 Description: INTERMEDITAE CONNECTORS INSTALLATION TLE_208 INSTALL TOP TRIMS INSTALL REMAINING TRIM Top Trim Top Trim Connection Clip and Top View STEP 8: Install Top Trims as shown.
  • Page 120 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 1 of 6 Description: 120 DEG INTERMEDITAE CONNECTORS INSTALLATION TLE_209 Rev. No: 1 Two-Way 180 Deg Intermediate Corner Connector (KCI_00), Three-Way Intermediate Corner Connector (KCI_3), Four-Way Intermediate Corner Connector (KCI_4), Two-Way 90 Deg Intermediate Corner Connector (KCIN_90)
  • Page 121 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 2 of 6 Description: 120 DEG INTERMEDITAE CONNECTORS INSTALLATION TLE_209 Rev. No: 1 Part and Product Identification KCI2_60 KCI3_60 6" - 27" 30" - 51" 6" - 24"...
  • Page 122 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 3 of 6 Description: 120 DEG INTERMEDITAE CONNECTORS INSTALLATION TLE_209 SLIDE ADD-ON PANELS IN PLACE SECURE ADD-ON PANELS STEP 1: Slide add-on Panels in place. STEP 2: Secure add-on Panels with fasteners provided.
  • Page 123 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 4 of 6 Description: 120 DEG INTERMEDITAE CONNECTORS INSTALLATION TLE_209 INSTALL CORNER BRACE LOCK POSI-LOCKS STEP 3: Install Corner Brace as shown. INSTALL POSI-LOCKS STEP 4: Install Posi-Locks as shown.
  • Page 124 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 5 of 6 Description: 120 DEG INTERMEDITAE CONNECTORS INSTALLATION TLE_209 SLIDE ADD-ON PANELS IN PLACE INSTALL INNER AND OUTER COVER STEP 6: Install Panel Trim STEP 7: Install Inner and Outer Cover as shown.
  • Page 125 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 6 of 6 Description: 120 DEG INTERMEDITAE CONNECTORS INSTALLATION TLE_209 INSTALL TOP TRIMS AND ELEMENTS INSTALL OUTER COVER Top Trim STEP 8: Install Panel Trim STEP 9: Install Outer Cover as shown.
  • Page 126 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 1 of 7 Description: INTERMEDITAE WOOD CORNER CONNECTIONS INSTALLATION TLE_210 Rev. No: 1 Two-Way Intermediate Connector 180 Deg-Wood (KCID_00), Two-Way Intermediate Connector 90 Deg-Wood (KCID_90), Three-Way Intermediate Connector-Wood(KCID_3)
  • Page 127 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 2 of 7 Description: INTERMEDITAE WOOD CORNER CONNECTIONS INSTALLATION TLE_210 Rev. No: 1 Part and Product Identification KCI2_60 KCI3_60 KCI3_60 A - 180 Deg Intermediate Corner Subassembly - Wood...
  • Page 128 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 3 of 7 Description: INTERMEDITAE WOOD CORNER CONNECTIONS INSTALLATION TLE_210 SLIDE ADD-ON PANELS IN PLACE SECURE ADD-ON PANELS STEP 1: Slide add-on Panels in place. STEP 2: Secure add-on Panels with fasteners provided.
  • Page 129 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 4 of 7 Description: INTERMEDITAE WOOD CORNER CONNECTIONS INSTALLATION TLE_210 INSTALL CORNER BRACE LOCK POSI-LOCKS STEP 3: Install Corner Brace as shown. INSTALL POSI-LOCKS STEP 4: Install Posi-Locks as shown.
  • Page 130 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 5 of 7 Description: INTERMEDITAE WOOD CORNER CONNECTIONS INSTALLATION TLE_210 INSTALL PANEL GASKETS INSTALL INNER COVER STEP 6: Install Gaskets as shown. STEP 7: Install Inner Cover as shown.
  • Page 131 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 6 of 7 Description: INTERMEDITAE WOOD CORNER CONNECTIONS INSTALLATION TLE_210 INSTALL ELEMENTS STEP 8: Install Elements as shown.
  • Page 132 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 7 of 7 Description: INTERMEDITAE WOOD CORNER CONNECTIONS INSTALLATION TLE_210 INSTALL ADD-ON PANELS AND COVERS NOTE: 180 Deg Two-Way Intermediate Conner Connection Installation STEP 1a: Secure Add-on Panels, insert both Inner Cover on Panel Hingeways then hook Corner Covers on Inner Covers Cut-outs...
  • Page 133 Installation Guides Section: PANEL CONNECTIONS & TRIMS Date: May 2020 Page No: 1 of 8 Description: END TRIMS & TOP TRIMS TLE_211 Rev. No: 1 Panel End Trim (KTE/KTED), Intermediate Panel End Trim (KTI/KTID), Part and Product Identification Top Trim (KTR/KTRD), Continuous Top Trim (KTRC/KTRCD), Top Trim...
  • Page 134 Installation Guides Section: PANEL CONNECTIONS & TRIMS Date: May 2020 Page No: 2 of 8 Description: END TRIMS & TOP TRIMS TLE_211 ATTACH TOP TRIM CLIPS PLACE TOP TRIM ONTO PANEL(S) Top Trim Shown Continuous Top Trim Shown NOTE: Make sure Clips are fully engaged.
  • Page 135 Installation Guides Section: PANEL CONNECTIONS & TRIMS Date: May 2020 Page No: 3 of 8 Description: END TRIMS & TOP TRIMS TLE_211 CONNECT TWO TOP TRIMS TOGETHER STEP 3: Slidr the Connection Clip into the Trim slot, attach the Top Trim to connect to, and slide it against the other one using the Connection Clip as alignment.
  • Page 136 Installation Guides Section: PANEL CONNECTIONS & TRIMS Date: May 2020 Page No: 4 of 8 Description: END TRIMS & TOP TRIMS TLE_211 END TRIM INSTALLATION (STD WIDTH) Top View Shown. STEP 4: Slide Gaskets onto Panel grooves and attach End Trim by pushing it against the Panel side.
  • Page 137 Installation Guides Section: PANEL CONNECTIONS & TRIMS Date: May 2020 Page No: 5 of 8 Description: END TRIMS & TOP TRIMS TLE_211 END TRIM INSTALLATION (CORRIDOR WIDTH) Top View Shown. Tear away part of End Gasket on the side where Corridor Width Elements are placed.
  • Page 138 Installation Guides Section: PANEL CONNECTIONS & TRIMS Date: May 2020 Page No: 6 of 8 Description: END TRIMS AND TOP TRIMS TLE_211 ATTACH CONNECTION CLIP FOR INTERMEDIATE END TRIM (IF APPLICABLE) Back View Shown. STEP 6: Slide Intermediate Connection Clip in to the Top Trim slot, then snap Top Trim onto Panel.
  • Page 139 Installation Guides Section: PANEL CONNECTIONS & TRIMS Date: May 2020 Page No: 7 of 8 Description: END TRIMS & TOP TRIMS TLE_211 INTERMEDIATE END TRIM INSTALLATION (STANDARD ELEMENT WIDTH) Top View Shown. STEP 7: Slide Gaskets into Panel Slots, place the Intermediate End Trim onto the Connecting Pin and snap into the Panel.
  • Page 140 Installation Guides Section: PANEL CONNECTIONS & TRIMS Date: May 2020 Page No: 8 of 8 Description: END TRIMS & TOP TRIMS TLE_211 INTERMEDIATE END TRIM INSTALLATION (CORRIDOR ELEMENT WIDTH) Tear away part of End Gasket on the side where Corridor Width Elements are placed.
  • Page 141 B - Panel Hingeway Gasket (B03-0250-X) x2 C - Posi-lock (D03-0003) xQty varies D - Corner Clamp Spring Clip (A09-0001) xQty varies E - Leverage Panel (KPU) xQty* F - Top Trim (KTR) xQty* G - Fabric Element (KES) xQty*...
  • Page 142 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 2 of 4 Description: PANEL WALL ADAPTER INSTALLATION TLE_212 INSTALL HINGEWAY GASKET FASTEN ADAPTER TO THE EXISTING WALL STEP 1: Remove Top Cap, install Hinge Way Gasket as shown then re-install Top Cap STEP 2: Fasten Panel Wall Adapter to existing wall.
  • Page 143 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 3 of 4 Description: PANEL WALL ADAPTER INSTALLATION TLE_212 INSTALL PANEL INSTALL POSI-LOCKS STEP 3: Install Panel as shown. STEP 4: Level the unit and install Posi-Locks as shown.
  • Page 144 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 4 of 4 Description: PANEL WALL ADAPTER INSTALLATION TLE_212 INSTALL PANEL INSTALL ELEMENTS STEP 3: Install Panel as shown. STEP 4: Install Elements as shown.
  • Page 145 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 1 of 6 Description: PANEL TO PANEL ADAPER INSTALLATION TLE_213 Rev. No: 1 Panel to Panel Adapter (KPP)
  • Page 146 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 2 of 6 Description: PANEL TO PANEL ADAPER INSTALLATION TLE_213 Rev. No: 1 Part and Product Identification KPP12 KPP15 KPP00/30 KPP00/42 KPP00/51 A - Off-Module Top Bracket (51" and higher) (A15-5222\51) B - Off-Module Top Bracket (42"...
  • Page 147 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 3 of 6 Description: PANEL TO PANEL ADAPER INSTALLATION TLE_213 INSTALL TOP BRACKET INSTALL BOTTOM BRACKET NOTE: Do not tighten bottom screws NOTE: Ensure Correct location of Top...
  • Page 148 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 4 of 6 Description: PANEL TO PANEL ADAPER INSTALLATION TLE_213 INSERT POSI-LOCKS KPP00 KPP(12/15) STEP 3: Insert Posi-Locks and lock in place.
  • Page 149 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 5 of 6 Description: PANEL TO PANEL ADAPER INSTALLATION TLE_213 INSTALL TOP TRIMS KPP00 KPP(12/15) NOTE: Mark overhanging portion of Top Trim and cut as required. STEP 4: Install Top Trims as shown.
  • Page 150 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 6 of 6 Description: PANEL TO PANEL ADAPER INSTALLATION TLE_213 INSTALL TOP BRACKET AND GAP COVER NOTE: Add 3M Velcro Coins to Off-Module Top Bracket and Off-Module 15" Gap Cover and connect.
  • Page 151 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 1 of 4 Description: TWO-WAY BRACKET FOR 30" HIGH PANEL 90 DEG INSTALLATION TLE_214a Rev. No: 1 Two-Way Bracket for 30" High Panel 90 Deg (KPJ90) Part and Product Identification...
  • Page 152 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 2 of 4 Description: TWO-WAY BRACKET FOR 30" HIGH PANEL 90 DEG INSTALLATION TLE_214a CONNECT PANELS TOGETHER INSTALL GLASS PANELS ADD- ON NOTE: For instructions, refer to Install...
  • Page 153 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 3 of 4 Description: TWO-WAY BRACKET FOR 30" HIGH PANEL 90 DEG INSTALLATION TLE_214a INSTALL BRACKETS INSTALL BRACKETS NOTE: Installation of top corner NOTE: Installation of top corner...
  • Page 154 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 4 of 4 Description: TWO-WAY BRACKET FOR 30" HIGH PANEL 90 DEG INSTALLATION TLE_214a INSTALL GASKETS Inner Corner Gasket STOP tearing and CUT away the flap of Gasket at that point...
  • Page 155 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 1 of 3 Description: TWO-WAY BRACKET FOR 30" HIGH PANEL 120 DEG INSTALLATION TLE_214b Rev. No: 1 Two-Way Bracket for 30" High Panel 120 Deg (KPJ602) Part and Product Identification...
  • Page 156 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 2 of 3 Description: TWO-WAY BRACKET FOR 30" HIGH PANEL 120 DEG INSTALLATION TLE_214b INSTALL BRACKETS INSTALL BRACKETS NOTE: Orient all reveal lines towards NOTE: Orient all reveal lines towards...
  • Page 157 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 3 of 3 Description: TWO-WAY BRACKET FOR 30" HIGH PANEL 120 DEG INSTALLATION TLE_214b INSTALL TOP SPLICER PLATE Top View STEP 2b: Install Top Splicer Plate using provided screws.
  • Page 158 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 1 of 3 Description: TWO-WAY BRACKET FOR 30" HIGH PANEL 180 DEG INSTALLATION TLE_214c Rev. No: 1 Two-Way Bracket for 30" High Panel 180 Deg (KPJ00) Part and Product Identification...
  • Page 159 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 2 of 3 Description: TWO-WAY BRACKET FOR 30" HIGH PANEL 180 DEG INSTALLATION TLE_214c INSTALL BRACKETS INSTALL BRACKETS NOTE: Orient all reveal lines towards NOTE: Orient all reveal lines towards...
  • Page 160 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 3 of 3 Description: TWO-WAY BRACKET FOR 30" HIGH PANEL 180 DEG INSTALLATION TLE_214c INSTALL GASKETS STOP tearing and CUT away the flap of Gasket at that point if...
  • Page 161 – Panel Connections & Trims 662c Section Issue Date: 2011 February 28 Page 5 of 5 (662c_G01-05)
  • Page 162 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 1 of 4 Description: THREE-WAY BRACKET FOR 30" HIGH PANEL 90 DEG INSTALLATION TLE_215a Rev. No: 1 Three-Way Bracket for 30" High Panel 90 Deg (KPJ90) Part and Product Identification...
  • Page 163 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 2 of 4 Description: THREE-WAY BRACKET FOR 30" HIGH PANEL 90 DEG INSTALLATION TLE_215a CONNECT PANELS TOGETHER INSTALL GLASS PANELS ADD- ON NOTE: For instructions, refer to Install...
  • Page 164 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 3 of 4 Description: THREE-WAY BRACKET FOR 30" HIGH PANEL 90 DEG INSTALLATION TLE_215a OTHER POSSIBLE PANEL CONFIGURATIONS Reverse Spring Washers and Posi-Locks positions when connecting to Glass Panels Add-On.
  • Page 165 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 4 of 4 Description: TWO-WAY BRACKET FOR 30" HIGH PANEL 90 DEG INSTALLATION TLE_215a INSTALL GASKETS Outer Corner Gasket Inner Corner Gasket Inner Corner Gasket STOP tearing and CUT away...
  • Page 166 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 1 of 6 Description: THREE-WAY BRACKET FOR 30" HIGH PANEL 120 DEG INSTALLATION TLE_215b Rev. No: 1 Three-Way Bracket for 30" High Panel 120 Deg (KP603) Part and Product Identification...
  • Page 167 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 2 of 6 Description: THREE-WAY BRACKET FOR 30" HIGH PANEL 120 DEG INSTALLATION TLE_215b CONNECT PANELS TOGETHER INSTALL GLASS PANELS ADD- ON Situation 1: Connection between Panels and...
  • Page 168 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 3 of 6 Description: THREE-WAY BRACKET FOR 30" HIGH PANEL 120 DEG INSTALLATION TLE_215b CONNECT PANEL AND GLASS PANEL TOGETHER INSTALL GLASS PANELS ADD- ON NOTE: Orient all reveal...
  • Page 169 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 4 of 6 Description: TWO-WAY BRACKET FOR 30" HIGH PANEL 120 DEG INSTALLATION TLE_215b INSTALL TOP SPLICER PLATE Top View STEP 3b: Install Top Splicer Plate as shown.
  • Page 170 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 5 of 6 Description: THREE-WAY BRACKET FOR 30" HIGH PANEL 120 DEG INSTALLATION TLE_215b CONNECT GLASS PANELS TOGETHER INSTALL GLASS PANELS ADD- ON NOTE: Orient all reveal...
  • Page 171 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 6 of 6 Description: THREE-WAY BRACKET FOR 30" HIGH PANEL 120 DEG INSTALLATION TLE_215b INSTALL TOP SPLICER PLATE Top View STEP 3c: Install Top Splicer Plate using screws provided.
  • Page 172 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 1 of 4 Description: FOUR-WAY BRACKET FOR 30" HIGH PANEL 90 DEG INSTALLATION TLE_216 Rev. No: 1 Four-Way Bracket for 30" High Panel 90 Deg (KPJ4) Part and Product Identification...
  • Page 173 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 2 of 4 Description: FOUR-WAY BRACKET FOR 30" HIGH PANEL 90 DEG INSTALLATION TLE_216 CONNECT PANELS TOGETHER INSTALL GLASS PANELS ADD- ON NOTE: For instructions, refer to Install...
  • Page 174 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 3 of 4 Description: FOUR-WAY BRACKET FOR 30" HIGH PANEL 90 DEG INSTALLATION TLE_216 CONNECT THE LAST PANEL STEP 3: Connect the last Panel as shown.
  • Page 175 Installation Guides Section: PANEL CONNECTIONS AND TRIMS Date: May 2020 Page No: 4 of 4 Description: FOUR-WAY BRACKET FOR 30" HIGH PANEL 90 DEG INSTALLATION TLE_216 OTHER POSSIBLE PANEL CONFIGURATIONS Simply engage Bracket into the Reverse Spring Washers and...
  • Page 182 Installation Guides Section: ELEMENTS Date: May 2020 Page No: 1 of 9 Description: ELEMENT INSTALLATION TLE_250a Rev. No: 1 Acoustic Element (KES), Acoustic Power/Comm Element (KEC), Accessory Part and Product Identification Element (KEL), Whiteboard Element (KEWN), Architectural Element (KER),...
  • Page 183 Installation Guides Section: ELEMENTS Date: May 2020 Page No: 2 of 9 Description: ELEMENT INSTALLATION TLE_250a PLACE BOTTOM CLIPS SNAP INTO PLACE STEP 1: Drop Element into the Panel using the bottom clip. STEP 2: Snap Element into the Panel using the top clips.
  • Page 184 Installation Guides Section: ELEMENTS Date: May 2020 Page No: 3 of 9 Description: ELEMENT INSTALLATION TLE_250a SNAP ON ELEMENTS STEP 3: Align Element clips with Panel slots and snap into place.
  • Page 185 Installation Guides Section: ELEMENTS Date: May 2020 Page No: 4 of 9 Description: ELEMENT INSTALLATION TLE_250a PLACE MARKER TRAY (IF APPLICABLE) FASTEN MARKER TRAY (IF APPLICABLE) STEP 4: Hook the Tray onto the Panel slots. STEP 5: Fasten the Tray to the Panel using the Screws provided.
  • Page 186 Installation Guides Section: ELEMENTS Date: May 2020 Page No: 5 of 9 Description: ELEMENT INSTALLATION TLE_250a PLACE AND SNAP WHITEBOARD TRAY INSTALLATION (STACK-ON PANEL ONLY) STEP 6: Hook and snap the Whiteboard to the Panel slots. STEP 7: Fasten the Tray to the Panel using the Screws provided.
  • Page 187 Installation Guides Section: ELEMENTS Date: May 2020 Page No: 6 of 9 Description: ELEMENT INSTALLATION TLE_250a ROTATE GASKETS (CORRIDOR ELEMENTS ONLY) PLACE ELEMENTS (CORRIDOR WIDTH) STEP 8: Remove Gaskets, rotate them, and place them back into the Panel Grooves.
  • Page 188 Installation Guides Section: ELEMENTS Date: May 2020 Page No: 7 of 9 Description: ELEMENT INSTALLATION TLE_250a BEZEL INSTALLATION #1 BEZEL INSTALLATION #2 STEP 10: Snap Bezel onto the cutout of the Element. This applies to Power Only, Power &...
  • Page 189 Installation Guides Section: ELEMENTS Date: May 2020 Page No: 8 of 9 Description: ELEMENT INSTALLATION TLE_250a BEZEL INSTALLATION #3 BEZEL INSTALLATION #4 STEP 12: Insert studs on the front bezel into the back plate through the cut out on the element.
  • Page 190 Installation Guides Section: ELEMENTS Date: May 2020 Page No: 9 of 9 Description: ELEMENT INSTALLATION TLE_250a BEZEL INSTALLATION #5 STEP 14: Insert studs behind the bezel into the holes along the cutout and secure into place. This applies to CALA Power & Communication 2& 4 Outlets.
  • Page 191 Installation Guides Section: ELEMENTS Date: May 2020 Page No: 1 of 3 Description: FLOOR FLUSH AND BASEBOARD ELEMENT INSTALLATION TLE_250b Rev. No: 0 Acoustic Element - Floor Flush (KESF), Metal Element - Floor Flush (KEMF), Part and Product Identification...
  • Page 192 Installation Guides Section: ELEMENTS Date: May 2020 Page No: 2 of 3 Description: FLOOR FLUSH AND BASEBOARD ELEMENT INSTALLATION TLE_250b FLOOR FLUSH INSTALLATION #1 FLOOR FLUSH INSTALLATION #2 STEP 1: Hook Bottom Clips into bottom Panel slots. STEP 2: Snap Top Clips into place.
  • Page 193 Installation Guides Section: ELEMENTS Date: May 2020 Page No: 3 of 3 Description: FLOOR FLUSH AND BASEBOARD ELEMENT INSTALLATION TLE_250b POSITIONING GASKET BASEBOARD ELEMENT INSTALLATION Standard Width Corridor Width STEP 3: Place gasket as shown above. STEP 4: Hook and snap Baseboard Element into bottom of the Panel.
  • Page 194 Installation Guides Section: ELEMENTS Date: May 2020 Page No: 1 of 6 Description: GLASS ELEMENT INSTALLATION TLE_251 Rev. No: 0 Single Glass Element - Standard/Corridor Width (KET, KETCW), Double Glass Part and Product Identification Element - Standard/Corridor Width (KETD, KETDCW), Single Architectural...
  • Page 195 Installation Guides Section: ELEMENTS Date: May 2020 Page No: 2 of 6 Description: GLASS ELEMENT INSTALLATION TLE_251 PLACE FOAM BLOCK STEP 1: Place Density Foam Block into Panel...
  • Page 196 Installation Guides Section: ELEMENTS Date: May 2020 Page No: 3 of 6 Description: GLASS ELEMENT INSTALLATION TLE_251 GLASS PANEL INSTALLATION #1 (STANDARD WIDTH) STEP 2: Engage the Glass Panel into the vertical of the Panel frame, then slide to engage into...
  • Page 197 Installation Guides Section: ELEMENTS 4 of 6 Date: May 2020 Page No: Description: GLASS ELEMENT INSTALLATION TLE_251 GLASS PANEL INSTALLATION #2 (STANDARD WIDTH) Top View Gasket Position (Standard Width) STEP 3: Snap second side of Glass Element into Panel.
  • Page 198 Installation Guides Section: ELEMENTS Date: May 2020 Page No: 5 of 6 Description: GLASS ELEMENT INSTALLATION TLE_251 GLASS PANEL INSTALLATION #1 (CORRIDOR WIDTH) Gasket Position (Corridor Width) STEP 4: Place the Panel Spring Clips into the side of the Panel opening.
  • Page 199 Installation Guides Section: ELEMENTS Date: May 2020 Page No: 6 of 6 Description: GLASS ELEMENT INSTALLATION TLE_251 GLASS PANEL INSTALLATION #2 (CORRIDOR WIDTH) STEP 5: Snap second side of the Glass Element into the panel. Make sure the Panel Spring...
  • Page 200 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 1 of 3 Description: WORKSURFACES TLE_301 Rev. No: 01 Concave Worksurface (KWCC), Concave Worksurface - Wood (KWBCC), Part and Product Identification Rectangular Worksurface (KWS) A - Rectangular Worksurface...
  • Page 201 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 2 of 3 Description: WORKSURFACES TLE_301 INSTALL SUPPORT BRACKETS IMPORTANT NOTE: To prevent disengagement of Worksurface Supports, the Anti-Dislodgement Clip MUST be used (as shown here) once the support brackets have been installed.
  • Page 202 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 3 of 3 Description: WORKSURFACES TLE_301 INSTALL WORKSURFACE STEP 2: Install the Worksurfaces as shown above.
  • Page 203 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 1 of 3 Description: WORKSURFACES TLE_302 Rev. No: 01 Part and Product Identification Radius Corner Worksurface w/Return (KWRR), Radius Corner Worksurface w/Return & Keyboard Support (KWRK), Extended Pentaged Worksurface -...
  • Page 204 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 2 of 3 Description: WORKSURFACES TLE_302 INSTALL SUPPORT BRACKETS IMPORTANT NOTE: To prevent disengagement of Worksurface Supports, the Anti-Dislodgement Clip MUST be used (as shown here) once the support brackets have been Insert Cantilever Flush Plates installed.
  • Page 205 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 3 of 3 Description: WORKSURFACES TLE_302 INSTALL WORKSURFACE STEP 2: Install the Worksurfaces using the Screws provided as shown above.
  • Page 206 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 1 of 4 Description: WORKSURFACES TLE_303 Rev. No: 01 Curved Corner Worksurface (KWSC) Part and Product Identification A - Curved Corner Worksurface (KWSC) x1 Standard Corner Worksurface (KWPS) x1...
  • Page 207 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 2 of 4 Description: WORKSURFACES TLE_303 INSTALL SUPPORT BRACKETS Insert Cantilever Flsuh Plates into Cantilever. IMPORTANT: To prevent disengagement of Worksurface Supports, the Anti-Dislodgement Clip MUST be used (as shown here) once the support brackets have been installed.
  • Page 208 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 3 of 4 Description: WORKSURFACES TLE_303 INSTALL WIRE MANAGEMENT KIT INSTALL WORKSURFACES NOTE: 120 degree Worksurfaces do not require installation of a Wire Management Kit. STEP 2: For Worksurfaces 54'' and 60'' width, install the Wire Management Kit to the STEP 3: Install the Worksurfaces to the Support Brackets using the Screws provided.
  • Page 209 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 4 of 4 Description: WORKSURFACES TLE_303 INSTALL KEYBOARD SUPPORT BACKSTOP OPTION 1 OPTION 2 STEP 4: Install Keyboard Support Backstop as shown above.
  • Page 210 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 1 of 4 Description: COUNTERTOPS TLE_304 Rev. No: 01 Rectangular Countertop (KWCS) Part and Product Identification A - Rectangular Countertop (KWCS) x1 B - Countertop Bracket-Left (A15-2668L) x1...
  • Page 211 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 2 of 4 Description: COUNTERTOPS TLE_304 INSERT COUNTERTOP BRACKETS STEP 1: Insert the Countertop Brackets to the correct slots of the Panel edge as shown above.
  • Page 212 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 3 of 4 Description: COUNTERTOPS TLE_304 INSTALL WORKSURFACE STEP 2: Install the Worksurface on the Countertops as shown above.
  • Page 213 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 4 of 4 Description: COUNTERTOPS TLE_304 INSTALL FLUSH PLATE FOR CORNER CONDITION STEP 3: Install the Flush Plates for corner condition.
  • Page 214 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 1 of 7 Description: WORKSURFACES TLE_305 Rev. No: 01 Rectangular Countertop (KWBT) Part and Product Identification A - Bullet Worksurface (KWBT) x1 B - Corner Bracket w/Anti- KWBT...
  • Page 215 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 2 of 7 Description: WORKSURFACES TLE_305 INSTALL SUPPORT BRACKETS (END CONDITION) IMPORTANT NOTE: To prevent disengagement of Worksurface Supports, the Anti-Dislodgement Clip MUST be used (as shown here) once the support brackets had been installed.
  • Page 216 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 3 of 7 Description: WORKSURFACES TLE_305 INSTALL MONOLEG STEP 1b: Install the Monoleg onto the Worksurface using the Screws provided.
  • Page 217 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 4 of 7 Description: WORKSURFACES TLE_305 NOTE: For Modesty Panel (KWMP) installation, refer to installation guide TLE_365. STEP 1c: Install the Worksurface onto the Support Brackets using the Screws provided. Attach the Modesty Panel.
  • Page 218 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 5 of 7 Description: WORKSURFACES TLE_305 INSTALL SUPPORT BRACKETS (GUESTING CONDITION) IMPORTANT: To prevent disengagement of Worksurface Supports, the Anti-Dislodgement Clip MUST be used (as shown here) once the support bracket has been installed.
  • Page 219 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 6 of 7 Description: WORKSURFACES TLE_305 INSTALL MONOLEG STEP 2b: Install the Monoleg to the Worksurface using the Screws provided.
  • Page 220 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 7 of 7 Description: WORKSURFACES TLE_305 INSTALL WORKSURFACE STEP 2c: Install the Worksurface onto the Support Brackets as shown above.
  • Page 221 1 of 5 Description: WORKSURFACES TLE_306 Rev. No: 01 Source Laminate Rectangular Worksurface (KUWS) Part and Product Identification A - Rectangle Worksurface Assembly (KUWS) x1 KUWS Leverage Transit T/O/S Source Laminate Worksurfaces can be applied to Leverage, T/O/S and Transit systems.
  • Page 222 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 2 of 5 Description: WORKSURFACES TLE_306 INSTALL BRACKETS Cantilever IMPORTANT NOTE: To prevent disengagement of Worksurface Supports, the Anti-Dislodgment Clip MUST be used (as shown here) once the Cantilever brackets have been installed.
  • Page 223 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 3 of 5 Description: WORKSURFACES TLE_306 INSTALL WORKSURFACE STEP 2: Install the Worksurfaces onto the Support Brackets as shown above.
  • Page 224 T/O/S Leverage Pilot holes for worksurface supports are provided to work with T/O/S, Transit and Leverage Systems. It is the responsibility of the installers to ensure Pilot holes are used accordingly. T/O/S When use with W/R/S applications, pilot holes for Worksurface Reinforcement Leverage Channel might not be provided and Channel has to be ordered separately.
  • Page 225 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 5 of 5 Description: WORKSURFACES TLE_306 PEDESTAL APPLICATION...
  • Page 226 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 1 of 4 Description: WORKSURFACES TLE_307 Rev. No: 01 Rectangular Worksurface (KWS), Radius Corner Worksurface with Return Part and Product Identification (KWRR), Curved Corner Worksurface (KWSC), Straight Corner Worksurface...
  • Page 227 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 2 of 4 Description: WORKSURFACES TLE_307 INSTALL BRACKETS IMPORTANT NOTE: To prevent disengagement of Worksurface Supports, the Anti-Dislodgement Clip MUST be used (as shown) once the Corner Brackets and Cantilevers have been installed.
  • Page 228 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 3 of 4 Description: WORKSURFACES TLE_307 INSTALL WORKSURFACES STEP 2: Attach the Worksurfaces on the Brackets as shown above.
  • Page 229 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 4 of 4 Description: WORKSURFACES TLE_307 PEDESTAL APPLICATIONS PLAN VIEW PLAN VIEW STEP 3: The options for orientations of the Pedestals are shown above.
  • Page 230 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 1 of 7 Description: WORKSURFACES TLE_308a Rev. No: 01 Rectangular Worksurface (D-Style) (KWSQ), Rectangular Worksurface with Part and Product Identification Curved Corners (D-Style) (KWSD) A - Rectangular Worksurface...
  • Page 231 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 2 of 7 Description: WORKSURFACES TLE_308a INSTALL SUPPORT BRACKETS IMPORTANT NOTE:To prevent disengagement of Worksurface Supports, the Anti-Dislodgment Clip MUST be used(as shown below) once the Support Brackets have been installed.
  • Page 232 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 3 of 7 Description: WORKSURFACES TLE_308a INSTALL LEGS NOTE: 1. For Flat Edge and Full Knife Edge, the space between the center of the leg and the edge of the worksurface should be 2.
  • Page 233 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 4 of 7 Description: WORKSURFACES TLE_308a INSTALL LEGS NOTE: 1. For Flat Edge and Full Knife Edge, the space between the center of the leg and the edge of the worksurface should be 2.
  • Page 234 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 5 of 7 Description: WORKSURFACES TLE_308a INSTALL WORKSURFACE NOTE: D-Style worksurfaces areinstalled 3/8" away from the panel wall. 3/8'' For full instructions on Worksurfaces Supports, refer to guides: TLE_350 "Cantilever CT"...
  • Page 235 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 6 of 7 Description: WORKSURFACES TLE_308a INSTALL RECTANGULAR WORKSURFACE STEP 4: Fasten the Rectangular Worksurface to the Supports.
  • Page 236 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 7 of 7 Description: WORKSURFACES TLE_308a INSTALL REINFORCEMENT CHANNEL STEP 5: Install the Reinforcement Channel below the Worksurface as shown above. Refer to TLE_364 for details.
  • Page 237 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 1 of 3 Description: WORKSURFACES TLE_308c Rev. No: 01 D Style Rectangular Worksurface with 4 Curved Corners (KWSDN_F) Part and Product Identification A1 - Rectangular Worksurface 4 Curved Corners No Scallop...
  • Page 238 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 2 of 3 Description: WORKSURFACES TLE_308c INSTALL LEGS STEP 1: Install the Legs onto the Worksurfaces using the Screws provided.
  • Page 239 Installation Guides Section: WORKSURFACES & COUNTERTOPS Date: May 2020 Page No: 3 of 3 Description: WORKSURFACES TLE_308c FLIP THE TABLE STEP 2: Flip the Table to make it stand on the ground.
  • Page 240 C1 - Cantilever Flush Plate (A15-0835) x 4 C2 - Cantilever Flush Plate (A15-0835) x 4 C3 - Cantilever Flush Plate (A15-0835) x 4 D - Worksurface (KWS) E - Flush End Gable (KFE) F - Leverage Panel (KP_T, KP_S, KP_C)
  • Page 241 Installation Guides Section: WORKSURFACE SUPPORT AND ACCESSORIES Date: May 2020 Page No: 2 of 2 Description: WORKSURFACE SUPPORT INSTALLATION TLE_350 INSTALL THE BRACKET INSERT THE FLUSH PLATE STEP 2: Push in the plates till the inner grooves align. SECURE THE ASSEMBLY STEP 1: Move the braket inside the panel and hook it to the grooves by tilting it.
  • Page 242 Installation Guides Section: WORKSURFACE AND SUPPORTS Date: May 2020 Page No: 1 of 3 Description: C-LEG TLE_351 Rev. No: 0 C-Leg (C29) Part and Product Identification A - C-Leg (assembled) (CL29) x 1 B - T Support Bracket (A15-0307) x 2...
  • Page 243 Installation Guides Section: WORKSURFACE AND SUPPORTS Date: May 2020 Page No: 2 of 3 Description: C-LEG TLE_351 RECONFIGURING THE LEG RECONFIGURATION THE LEG STEP 1: Assemble the T Support Bracket, Vertical Bracket and Bracket Pad onto the Leg. STEP 2: Reconfigure the C-Leg by dissembling the brackets onto the Leg.
  • Page 244 Installation Guides Section: WORKSURFACE AND SUPPORTS Date: May 2020 Page No: 3 of 3 Description: C-LEG TLE_351 INSTALL THE LEG SECURE THE T SUPPORTS STEP 3: Insert the C-Leg in the panel wall. ALIGN THE LEVELLERS STEP 4: Rotate the levelers to level the C-Leg.
  • Page 245 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 1 of 2 Description: MONOLEG TLE_352 Rev. No: 0 Monoleg (CZ29) Part and Product Identification A - CZ29 Monoleg (CZ29) x1 B - 1/4" - 20 x "...
  • Page 246 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 2 of 2 Description: MONOLEG TLE_352 ASSEMBLE THE MONOLEG SECURE THE BRACKETS STEP 1: Insert the Monoleg with the worksurface with the screws provided. STEP 2: Secure the brackets with the worksurface.
  • Page 247 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 1 of 2 Description: FLUSH PLATE TLE_353 Rev. No: 0 Flush Plate (TLFP) Part and Product Identification A - Flush Plate (A15-2443) x2 B - 1/4"- 20 x "...
  • Page 248 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 2 of 2 Description: FLUSH PLATE TLE_353 STEP 1: Secure the Bracket with the worksurface to fix them with eachother.
  • Page 249 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 1 of 2 Description: xm POST LEG TLE_354 Rev. No: 1 xm Post Leg (TXPL) Part and Product Identification A1 - xm Post Leg - Fixed (TXPL1) x1...
  • Page 250 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES 2 of 2 Date: May 2020 Page No: Description: xm POST LEG TLE_354 STEP 1: Secure the Upper Weldment and the Lower Weldment using screw and nut. STEP 2: Secure the tubing in the lower and upper weldment using the Nut and Bolt.
  • Page 251 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 1 of 8 Description: LYFT END GABLE INSTALLATIONS TLE_355 Rev. No: 0 End Gable - Lyft (HEG), Fixed-Height Thin Panel Mount Bracket (HWB) Part and Product Identification...
  • Page 252 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 2 of 8 Description: LYFT END GABLE INSTALLATIONS TLE_355 PLACE BRACKETS ATTACH LEVELER & BUMPER Cross Section STEP 1: Snap Mounting Brackets into place as shown above.
  • Page 253 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 3 of 8 Description: LYFT END GABLE INSTALLATIONS TLE_355 LINK GABLE TO PANEL PLACE WORKSURFACE ON GABLE Cross Section STEP 3: Fasten End Gable Tether to the bottom of the End Gable using Machine Screws, then STEP 4: Drop Worksurface and fasten to Fixed Height Mounting Bracket with ONE SCREW.
  • Page 254 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 4 of 8 Description: LYFT END GABLE INSTALLATIONS TLE_355 LEVEL PANELS AND GABLE FASTEN TOP OF THE GABLE 90deg STEP 5: Ensure Panels are leveled, and that the Gable is squared.
  • Page 255 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 5 of 8 Description: LYFT END GABLE INSTALLATIONS TLE_355 FASTEN END GABLE TO WORKSURFACE FASTEN GABLE TO WORKSURFACE STEP 7: Push End Gable against the Panel and tighten Screws of End Gable Tether to the STEP 8: Fasten End Gable and Fixed Height Mounting Bracket to Worksurface Wood Screws bottom rail of Lyft Panel.
  • Page 256 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 6 of 8 Description: LYFT END GABLE INSTALLATIONS TLE_355 INFILL FLUSH END GABLE INSTALLATION #1 (OPTIONAL) STEP 9: Place the Infill as shown above.
  • Page 257 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 0 of 8 Description: LYFT END GABLE INSTALLATIONS TLE_355 STEP 10: Fasten Infill Flush End Gable to underside of Worksurface with Wood Screws provided. NOTE: Before tightening, check if further adjustment is required.
  • Page 258 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 8 of 8 Description: LYFT END GABLE INSTALLATIONS TLE_355 HWB BRACKET LOCATIONS (OPTIONAL) A Worksurface is 24'' deep and a total span is greater than 78'' A Worksurface is 30'' deep and a total span is greater than 60'' A Post Leg must be installed 17"...
  • Page 259 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 1 of 3 Description: ADJUSTABLE HEIGHT THIN PANEL MOUNT BRACKET TLE_356 Rev. No: 1 ADJUSTABLE HEIGHT THIN PANEL MOUNT BRACKET (HWBA) Part and Product Identification A - Vertical Support Assembly Adj.
  • Page 260 STEP 3: The Adjustable Height Thin Panel Mount Bracket is compatible with the T/O/S, range is 6". Transit and Leverage Catalogues. The Adjustable Height Mount Bracket spaces give the Worksurface a consistent gap from the Thin Panel verticals to maintain the same gapping as for...
  • Page 261 Installation Guides Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 3 of 3 Description: ADJUSTABLE HEIGHT THIN PANEL MOUNT BRACKET TLE_356 POST LEG INSTALLATION Important: A Post Leg must be installed 17" from the user edge to provide additional support if: >78"...
  • Page 262 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 1 of 4 Description: WORKSURFACE SUPPORTING PEDESTAL KIT TLE_357 Rev. No: 0 Worksurface Supporting Pedestal Kit (HWP) Part and Product Identification A - Lyft Filler Panel (CMFILER) x1...
  • Page 263 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 0 of 4 Description: WORKSURFACE SUPPORTING PEDESTAL KIT TLE_357 SECURE THE PEDESTAL FIX THE WORKSURFACE SUPPORT BRACKET Align holes of Filler Panel and worksurface Support Bracket STEP 1: Remove the Drawer and fasten the panel to the back of the Pedestal.
  • Page 264 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 0 of 4 Description: WORKSURFACE SUPPORTING PEDESTAL KIT TLE_357 LEVEL PEDESTAL SECURE THE BUMPERS STEP 4: Level the Pedestal by turning the leveler screw. INSTALL RED HOOK STEP 5: Engage Rail Hook into horizontal Panel Rail.
  • Page 265 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 4 of 4 Description: WORKSURFACE SUPPORTING PEDESTAL KIT TLE_357 INSERT LYFT TETHER ASSEMBLE THE WORKSURFACE STEP 7: Fix Lyft Tether at the onto the panel to mount the worksurface.
  • Page 266 WORKSURFACE TO TOWER SUPPORT INSTALLATION TLE_358a Rev. No: 1 DUS Low Credenza to Worksurface Support (UNCPWN), Worksurface-to-Tower Bracket (UWBTBB), Worksurface-to-Tower Bracket with Flush Plate (UWBTBF) NOTE: For specific alignment of worksurfaces to storage (Towers) and Leverage Panel, refer to the application guideline.
  • Page 267 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 2 of 10 Description: WORKSURFACE TO TOWER SUPPORT INSTALLATION TLE_358a Rev. No: 1 Part and Product Identification Part and Product Identification UWBTBB UNCPWNH G - Tower WS Support Bracket (A15-8949) x2 A - DUS Low Cred.
  • Page 268 Leverage Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 3 of 10 Description: WORKSURFACE TO TOWER SUPPORT INSTALLATION TLE_358a INSTALL MOUNTING BRACKET INSTALL SUPPORT BRACKET COVER District Towers 22" 2" 27" 2" Elevated Standard STEP 1: Install Mounting Bracket using Screws provided.
  • Page 269 Leverage Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 4 of 10 Description: WORKSURFACE TO TOWER SUPPORT INSTALLATION TLE_358a DRILL PILOT HOLES INSTALL BRACKET BASE 20" Worksurface 24" Worksurface 30" Worksurface 90 Deg. 36" Worksurface 6"...
  • Page 270 Leverage Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 5 of 10 Description: WORKSURFACE TO TOWER SUPPORT INSTALLATION TLE_358a SECURE BASE BRACKET TEMPORARYLY INSTALL TOP BRACKET 28" WS Height 29" 30" 31" 32" STEP 5: Fasten the Base Bracket to the top of the Credenza.
  • Page 271 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 6 of 10 Description: WORKSURFACE TO TOWER SUPPORT INSTALLATION TLE_358a DROP THE WORKSURFACE IN PLACE 20" Worksurface STEP 7: Drop the Worksurface in place. Align the two edges of the Credenza with the Worksurface and use the holes (or the edge) of the top Bracket to mark the location where the Bracket will be installed.
  • Page 272 Leverage Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 7 of 10 Description: WORKSURFACE TO TOWER SUPPORT INSTALLATION TLE_358a DISASSEMBLE SUPPORT BRACKET FASTEN TOP BRACKET STEP 8: Disassemble the Support Bracket and Remove Worksurface. STEP 9: Place Worksurface on a clean area and fasten the Top Bracket using the marked utline...
  • Page 273 Leverage Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 8 of 10 Description: WORKSURFACE TO TOWER SUPPORT INSTALLATION TLE_358a FLIP WORKSURFACE INSERT TOP BRACKET TO BASE BRACKET STEP 10: Flip Worksurface to normal position STEP 11: Insert Top Bracket to Base Bracket and secure with bolts as shown on step 6.
  • Page 274 Leverage Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 9 of 10 Description: WORKSURFACE TO TOWER SUPPORT INSTALLATION TLE_358a SECURE WORKSURFACE LEVEL WORKSURFACE STEP 12: Secure Worksurface to the Tower Support Brackets with fasteners provided. STEP 13: Level Worksurface.
  • Page 275 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 10 of 10 Description: WORKSURFACE TO TOWER SUPPORT INSTALLATION TLE_358a TOWER WS SUPPORT BRACKET AND FLUSH PLATE INSTALLATION (UWBTBF) UWBTBF is used when attaching a worksurface to the side of a Tower/Locker that has a cubby back.
  • Page 276 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 1 of 5 Description: HEIGHT-ADJUSTABLE WORKSURFACE TO TOWER SUPPORT INSTALLATION TLE_358b Rev. No: 1 Height-Adjustable Worksurface to Tower Support (UWBTH) Part and Product Identification A - Tower to Worksurface Mounting Bracket.
  • Page 277 Leverage Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 2 of 5 Description: HEIGHT-ADJUSTABLE WORKSURFACE TO TOWER SUPPORT INSTALLATION TLE_358b MEASURE LOCATION FOR MOUNTING BRACKET INSTALL MOUNTING BRACKET District Towers X" X" X" X" 21" Elevated Standard 26"...
  • Page 278 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 3 of 5 Description: HEIGHT-ADJUSTABLE WORKSURFACE TO TOWER SUPPORT INSTALLATION TLE_358b FASTEN SCREWS 28" WS Ht. 29" WS Ht. 30" WS Ht. 31" WS Ht. 32" WS Ht.
  • Page 279 Leverage Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 4 of 5 Description: HEIGHT-ADJUSTABLE WORKSURFACE TO TOWER SUPPORT INSTALLATION TLE_358b INSTALL BRACKET COVER SECURE WORKSURFACE STEP 4: Place the Bracket Cover against the Support Brackets. STEP 5: Place Worksurface on top of the Mounting Brackets and fasten with 8 washer head...
  • Page 280 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 5 of 5 Description: HEIGHT-ADJUSTABLE WORKSURFACE TO TOWER SUPPORT INSTALLATION TLE_358b LEVEL THE WORKSURFACE STEP 6: Level the Worksurface.
  • Page 281 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 1 of 5 Description: FLUSH END GABLE INSTALLATION TLE_359 Rev. No: 0 Flush End Gable (KFENM, KFENL, KFENW) Part and Product Identification AA1 - Panel Flush End Gable -...
  • Page 282 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 2 of 5 Description: FLUSH END GABLE INSTALLATION TLE_359 LAMINATE/VENEER GABLE INSTALLATION STEP 1: Fasten Mounting Angle and Mounting Bracket to the Flush End Gable with the...
  • Page 283 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 3 of 5 Description: FLUSH END GABLE INSTALLATION TLE_359 ATTACH GABLE AND FASTEN WORKSURFACE STEP 2: Hook Gable into Panel Slots. Then place Worksurface onto the Gable and fasten with Screws provided.
  • Page 284 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 4 of 5 Description: FLUSH END GABLE INSTALLATION TLE_359 MEDAL END GABLE INSTALLATION STEP 3: Fasten Gable Brackets to the Flush End Gable with the provided Screws as shown.
  • Page 285 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 5 of 5 Description: FLUSH END GABLE INSTALLATION TLE_359 FASTEN WORKSURFACE STEP 4: Place Worksurface onto the End Gable and fasten with the provided screws as shown...
  • Page 286 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESORIES Date: May 2020 Page No: 1 of 3 Description: CORNER BRACKET INSTALLATION TLE_360 Rev. No: 0 Corner Bracket (KBC) Part and Product Identification A - Universal Support Bracket (BU100) x1 B - Corner Anti-Dislodgement Clip...
  • Page 287 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESORIES Date: May 2020 Page No: 2 of 3 Description: CORNER BRACKET INSTALLATION TLE_360 HOOK CORNER BRACKET INTO THE PANEL STEP 1: Hook the Corner Bracket to the Panel Slots as shown. NOTE: Make sure the Bracket height matches the other supports in the Station.
  • Page 288 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESORIES Date: May 2020 Page No: 3 of 3 Description: CORNER BRACKET INSTALLATION TLE_360 INSTALL ANTI-DISLODGEMENT CLIP FASTEN WORKSURFACE STEP 2: Place Dislodgement Clip above the Corner Bracket as shown. STEP 3: Place Corner Worksurface onto the Corner Bracket and fasten it with Screws (Not...
  • Page 289 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 1 of 5 Description: PEDESTAL SUPPORTING BRACKET INSTALLATION TLE_361 Rev. No: 0 Pedestal Supporting Bracket (KSBN) Part and Product Identification A - Pedestal Support Bracket Sub-Assembly (N01-2265) x1...
  • Page 290 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 2 of 5 Description: PEDESTAL SUPPORTING BRACKET INSTALLATION TLE_361 UNWIND LEVELERS REMOVE DRAWER STEP 1: Unwind the levelers so that the pedestal height is about 28" high.
  • Page 291 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 3 of 5 Description: PEDESTAL SUPPORTING BRACKET INSTALLATION TLE_361 FASTEN SUPPORT BRACKET ATTACH PEDESTAL TO PANEL STEP 3: Fasten the Support Bracket to the back of the Pedestal with screws provided.
  • Page 292 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 4 of 5 Description: PEDESTAL SUPPORTING BRACKET INSTALLATION TLE_361 INSERT ANTI-DISLODGEMENT BRACKET SECURE BRACKET Back View STEP 5: Insert the Anti-Dislodgement Bracket into the Panel slots. STEP 6: Secure Bracket using Hex Nuts provided.
  • Page 293 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 5 of 5 Description: PEDESTAL SUPPORTING BRACKET INSTALLATION TLE_361 FASTEN PEDESTAL TO WORKSURFACE PUT DRAWER BACK INTO POSITION STEP 7: Fasten Pedestal to Worksurface. STEP 8: Align the drawer glides with the pedestal glides. Insert the drawer pushing it all the NOTE : Screws are not provided.
  • Page 294 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 1 of 2 Description: WIRE MANAGEMENT TLE_362 Rev. No: 0 Wire Tray (KZW) Part and Product Identification A1 - Wire Tray (B03-0959) x1 A2 - #12 x 3/4" Screw, Type A...
  • Page 295 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 2 of 2 Description: WIRE MANAGEMENT TLE_362 INSTALL WIRE TRAY Wire Tray Plan View NOTE: Space the Wire Tray equally and Place the Front edge 2" from the back of the Worksurface.
  • Page 296 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 1 of 5 Description: INTERMEDIATE C-LEG TLE_363 Rev. No: 0 Off-Module C-Leg (KCM) Part and Product Identification A1 - C-Leg Support Bracket Assm. (N09-0132) x1 A2 - T-Support Bracket (A15-0307) x2 A3 - 1/4"-20 x 5/8"...
  • Page 297 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 2 of 5 Description: INTERMEDIATE C-LEG TLE_363 REMOVE ELEMENTS ATTACH UPPER BRACKET Element STEP 1: Remove Elements from the panels. REMOVE UPPER BRACKET NOTE: Depending on the location of the Bracket, Hole alignment would not be available for some screws.
  • Page 298 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 3 of 5 Description: INTERMEDIATE C-LEG TLE_363 ATTACH ACORN NUT ATTACH C-LEG ASSEMBLY NOTE: Item H and I are not needed when installing on Flush floor panel.
  • Page 299 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 4 of 5 Description: INTERMEDIATE C-LEG TLE_363 ATTACH T-BRACKET ATTACH WORKSURFACE T-BRACKET CONFIGURATION RIGHT HAND CENTER LEFT HAND Threaded Insert STEP 6: Attach T-Bracket onto the C-Leg assembly. Choose the Orientation of the bracket and STEP 7: Attach Worksurface onto the C-Leg and secure it through the brackets using the secure it using the screws provided.
  • Page 300 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 5 of 5 Description: INTERMEDIATE C-LEG TLE_363 BACK TO BACK INSTALLATION (OPTIONAL) BACK TO BACK INSTALLATION (OPTIONAL) NOTE: Elements are hidden NOTE: For Back to Back Installation only Step for illustration purpose.
  • Page 301 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 1 of 2 Description: REINFORCEMENT CHANNEL AND STRUCTURAL PLATE TLE_364 Rev. No: 0 Worksurface Reinforcement Channel and Flush Plate (UNRC and UNRFS) Part and Product Identification A1 - Reinforcement Channel (A15-6956) x1 A2 - #10 x 0.875"...
  • Page 302 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 2 of 2 Description: REINFORCEMENT CHANNEL AND STRUCTURAL PLATE TLE_364 Attach Reinforcement Channel and Flush Plate STEP 1: Attach the Reinforcement Channel and Flush Plates onto the Worksurface. Secure the Reinforcement Channel and Flush Plates using the Screws Provided.
  • Page 303 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 1 of 4 Description: MODESTY PANEL TLE_365 Rev. No: 0 Modesty Panel - Inset (KWMP) Part and Product Identification A1 - Solid Wksf. Modesty Weldment (N09-0438) x1 NOTE: KWMPN is shown as A1 - Louvre Solo Wksf.
  • Page 304 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 2 of 4 Description: MODESTY PANEL TLE_365 ATTACH ANTI-DISLODGEMENT CLIP MOUNT WIRE TROUGH NOTE: Wire Trough to be mounted flush to the rear edge or inset 7 1/2".
  • Page 305 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 3 of 4 Description: MODESTY PANEL TLE_365 ATTACH MODESTY GASKET ATTACH MODESTY PANEL STEP 4: Attach Modesty Gasket onto the Wire Trough as shown. STEP 5: Mount Modesty Weldment onto the Wire Trough.
  • Page 306 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 4 of 4 Description: MODESTY PANEL TLE_365 SECURE MODESTY WELDMENT SECURE MODESTY PANEL ASSEMBLY STEP 6: Secure the Modesty Weldment onto the Wire Trough using the screws provided.
  • Page 307 Parallel - Elevated (KUSPBEP), Parallel - Standard (KUSPBSP), Perpendicular Part and Product Identification Front - Elevated (KUSPBEF), Perpendicular Front - Standard (KUSPBSF), A - DUS to Leverage Perp., Back, Top Bracket Perpendicular Back Elevated (KUSPBEB) & Perpendicular Back Standard (A15-8804L/R) x1 (KUSPBEB) B - DUS to Leverage Perp., Front, Top Bracket...
  • Page 308 May 2020 Page No: 0 of 3 Description: DUS TO LEVERAGE PARALLEL AND PERPENDICULAR INSTALLATION TLE_366 Insert Top and Bottom Brackets into Panel Frame Slots. Align Credenza Fasten Top Bracket with four wood screws. With an Allan Key, fasten the...
  • Page 309 Date: May 2020 Page No: 0 of 3 Description: DUS TO LEVERAGE PARALLEL AND PERPENDICULAR INSTALLATION TLE_366 Screw Hex Bolt to Credenza (leave " clearence). Insert Top and Bottom Screw Hex Bolt to Credenza (leave " clearence) Insert Bottom Bracket...
  • Page 310 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 1 of 2 Description: MINI LEG INSTALLATION TLE_367 Rev. No: 0 Mini Leg (UNCLN) Part and Product Identification A1 - Mini Leg Weldment Assm. (UNCLN) x1 A2 - #10 x 0.875" Long Screw, Quad Pan Washer Head...
  • Page 311 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 2 of 2 Description: MINI LEG INSTALLATION TLE_367 INSTALL MINI LEG ASSEMBLY ATTACH WORKSURFACE 4" 4" Wall Rail System NOTE: The Mini Leg is fastened only to the Worksurface and it rests on the Credenza.
  • Page 312 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 1 of 5 Description: DESK EDGE SCREEN - GLASS INSTALLATION TLE_368 Rev. No: 0 Desk Edge Screen - Glass (KSDEG, KSFDG) Part and Product Identification A - Desk Edge Screen...
  • Page 313 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 2 of 5 Description: DESK EDGE SCREEN - GLASS INSTALLATION TLE_368 PREPARE WELDMENT LOCATION Align with worksurface edge Mark here Bottom View STEP 1: Place Weldment under the Worksurface and mark location as shown.
  • Page 314 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 3 of 5 Description: DESK EDGE SCREEN - GLASS INSTALLATION TLE_368 SLIDE BRACKETS INTO PLACE Top View +/-10" +/-10" +/-10" Side View Flush NOTE: Brackets should be placed +/- 10" from the edge of the Glass Pane.
  • Page 315 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 4 of 5 Description: DESK EDGE SCREEN - GLASS INSTALLATION TLE_368 IMPORTANT! One person should hold the Glass in place while a second person secures the screws.
  • Page 316 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 5 of 5 Description: DESK EDGE SCREEN - GLASS INSTALLATION TLE_368 SCREEN ADJUSTMENT (IF APPLICABLE) Bracket can be max .050" higher than clamping bar or max .030"...
  • Page 317 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 1 of 3 Description: SLIM POST LEG INSTALLATION TLE_369 Rev. No: 0 Slim Post Leg and Reconfigurable Low Credenza to W\S Support (KLP and Part and Product Identification UWCPWN) A1 - Low Cred.
  • Page 318 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 2 of 3 Description: SLIM POST LEG INSTALLATION TLE_369 INSERT BRACKETS BRACKET POSITIONING 30" WS 24" WS " 36" WS 36" WS Cross Section NOTE: Refer to Bracket position chart before fastening.
  • Page 319 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 3 of 3 Description: SLIM POST LEG INSTALLATION TLE_369 INSTALL SLIM LEG SECURE WORKSURFACE NOTE: Place the top plate of the Slim Post Legs about of an inch away from Worksurface Edges.
  • Page 320 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 1 of 4 Description: MID GABLE INSTALLATION TLE_371a Rev. No: 0 Mid Gable On-Module (KGMFF1, KGMFM1, KGMFW1) Part and Product Identification A - Mid Gable Sub-Assembly (N09-3185) x1...
  • Page 321 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 2 of 4 Description: MID GABLE INSTALLATION TLE_371a ATTACH TOP SUPPORT ATTACH ON-MODULE BRACKET STEP 1: Fasten Top Support to the Mid Gable using the Screws provided.
  • Page 322 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 3 of 4 Description: MID GABLE INSTALLATION TLE_371a ATTACH MID GABLE TO BRACKETS STEP 3: Fasten Mid Gable to Brackets using the Screws provided. NOTE: Make sure Gable is leveled.
  • Page 323 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: May 2020 Page No: 4 of 4 Description: MID GABLE INSTALLATION TLE_371a ATTACH WORKSURFACE TO MID GABLE STEP 4: Attach Worksurface to Mid Gable using Machine Screws provided.
  • Page 324 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 1 of 6 Description: OFF-MODULE MID GABLE INSTALLATION TLE_371b Rev. No: 0 Mid Gable Off-Module (KGMFF2, KGMFM2, KGMFW2) Part and Product Identification A - Mid Gable Sub-Assembly...
  • Page 325 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 2 of 6 Description: OFF-MODULE MID GABLE INSTALLATION TLE_371b ATTACH TOP PLATE AND LOWER BRACKET STEP 1: Fasten the Lower Bracket and Top Plate to the Mid Gable using the Screws provided.
  • Page 326 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 3 of 6 Description: OFF-MODULE MID GABLE INSTALLATION TLE_371b ATTACH UPPER BRACKET TO PANEL RAIL NOTE: Once Bracket is attached, re-install Elements. STEP 2: Place the Upper Bracket on the Panel rail, and fasten with the Self-Drilling Screws...
  • Page 327 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 4 of 6 Description: OFF-MODULE MID GABLE INSTALLATION TLE_371b ATTACH BOTTOM BRACKET TO PANEL STEP 3: Align Mid Gable against Panels, level Mid Gable and attach it to the bottom Panel Rail using the Screw and Nut provided.
  • Page 328 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 5 of 6 Description: OFF-MODULE MID GABLE INSTALLATION TLE_371b ATTACH MID GABLE TO PANEL ATTACH WORKSURFACE TO MID GABLE Level STEP 4: Level Mid Gable and fasten Upper Bracket with Screws provided.
  • Page 329 Installation Guides Section: WORKSURFACE SUPPORTS & ACCESSORIES Date: May 2020 Page No: 6 of 6 Description: OFF-MODULE MID GABLE INSTALLATION TLE_371b BACK TO BACK INSTALLATION (OPTIONAL) Bottom View STEP 6: Place Upper Brackets so that they are touching as shown above, and fasten with...
  • Page 330 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 1 of 2 Description: MASTER KEY, LOCK REMOVAL, NUMBERED KEY, LOCK CORE AND KEYS TLE_401 Rev. No: 1 Master Key (KM), Lock Removal Key (KR), Numbered Key (KK), Lock Core...
  • Page 331 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 2 of 2 Description: MASTER KEY, LOCK REMOVAL, NUMBERED KEY, LOCK CORE AND KEYS TLE_401 INSERT KEY INTO LOCK CORE INSERT KEY AND LOCK CORE INTO LOCK...
  • Page 332 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 1 of 2 Description: SHELF DIVIDER INSTALLATION TLE_402 Rev. No: 1 Shelf Divider (BK61) Part and Product Identification A - Shelf Divider (BK61) x6...
  • Page 333 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 2 of 2 Description: SHELF DIVIDER INSTALLATION TLE_402 INSTALL SHELF DIVIDER STEP 1: Slide Shelf Divider into the slot as shown then slide to the desired position.
  • Page 334 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 1 of 3 Description: TABLE RAIL TLE_403 Rev. No: 1 Table Rail (ACTR) Part and Product Identification 24" - 57" A -Table Rail (ACTR) x1 60" - 72"...
  • Page 335 Installation Guides Section: MOUNTED STORAGE & ACCESSORIES Date: May 2020 Page No: 2 of 3 Description: TABLE RAIL TLE_403 TABLE RAIL INSTALLATION FOR WORKSURFACES STEP 1: Mount the Table Rail onto the Worksurface and Tighten the Thumb Screws to Secure it in place.
  • Page 336 Installation Guides Section: MOUNTED STORAGE & ACCESSORIES Date: May 2020 Page No: 3 of 3 Description: TABLE RAIL TLE_403 FOR WORKSURFACE WITH FULL FLUSH PANEL SECURE THE RAIL NOTE: Bend Gasket to allow access to the Cut-outs. STEP 2a: Mount the Table Rail onto the Worksurface through the Cut-outs.
  • Page 337 A - Table Screen (ACTS) x1 ACTL A - Translucent Table Screen (ACTL) x1 Transit (ACTS or ACTL) B - Desk Screen T-Nut (A25-2006) x1 Ability (ACTS or ACTL) C - 1/4" - 20x35mm Murakoshi Bolt (E03-0139) x1 Leverage (ACTS only)
  • Page 338 Installation Guides Section: MOUNTED STORAGE & ACCESSORIES Date: May 2020 Page No: 2 of 3 Description: TABLE SCREENS TLE_404 ASSEMBLE NUT AND BOLT ARRANGEMENT MOUNT THE SCREEN NOTE: Make sure the orientation of T-Nut is correct. STEP 1: Assemble Nut and Bolt arrangement as illustrated.
  • Page 339 Installation Guides Section: MOUNTED STORAGE & ACCESSORIES Date: May 2020 Page No: 3 of 3 Description: TABLE SCREENS TLE_404 SECURE THE SCREEN STEP 3: Secure the Screen by rotating the T-Nuts from Horizontal position to Vertical position by using Allen Key as shown.
  • Page 340 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 1 of 10 Description: OVERHEAD CABINET INSTALLATION TLE_405 Rev. No: 1 Overhead Cabinet (KSF) NOTE: Only Leverage Panel Off-Module is shown.
  • Page 341 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 2 of 10 Description: OVERHEAD CABINET INSTALLATION TLE_405 Rev. No: 1 Part and Product Identification Part and Product Identification Lyft Bracket Kit - X07-0059-X A - KSF Overhead Body Weldment...
  • Page 342 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 3 of 10 Description: OVERHEAD CABINET INSTALLATION TLE_405 CONNECT RETAINER CLIP SECURE RETAINER CLIP STEP 1: Place Retainer Clip onto Mounting Bracket as shown. HOOK MOUNTING BRACKETS TO THE PANEL STEP 2: Install Mounting Brackets into the Panel as shown.
  • Page 343 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 4 of 10 Description: OVERHEAD CABINET INSTALLATION TLE_405 CONNECT CABINET SECURE CABINET NOTE: On-Module Installation STEP 4: Connect Cabinet to the Panel as shown. STEP 5: Secure Cabinet into the Panel as shown.
  • Page 344 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 5 of 10 Description: OVERHEAD CABINET INSTALLATION TLE_405 UNINSTALL ELEMENTS SECURE BRACKET AND SECURITY LOCK NOTE: Off-Module Installation NOTE: Hand tighten only for further adjustments. STEP 1b: Uninstall Elements as shown.
  • Page 345 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 6 of 10 Description: OVERHEAD CABINET INSTALLATION TLE_405 INSTALL CABINET TO THE PANEL SECURE BRACKET AND SECURITY LOCK Front View NOTE: Pick desired location and tighten all bolts.
  • Page 346 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 7 of 10 Description: OVERHEAD CABINET INSTALLATION TLE_405 SECURE SECURITY LOCK SECURE BRACKET AND SECURITY LOCK NOTE: View shows underside of Overhead Cabinet STEP 5b: Secure Security Lock using Screw provided.
  • Page 347 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 8 of 10 Description: OVERHEAD CABINET INSTALLATION TLE_405 CONNECT SECURITY LOCK AND CHANNEL SECURE CHANNEL NOTE: Lyft Installation STEP 1c: Connect Security Lock and Channel as shown.
  • Page 348 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 9 of 10 Description: OVERHEAD CABINET INSTALLATION TLE_405 INSTALL CABINET INTO PANEL SECURE CABINET STEP 4c: Install Cabinet into Panel as shown. STEP 5c: Secure Cabinet by tightening Nuts as shown...
  • Page 349 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 10 of 10 Description: OVERHEAD CABINET INSTALLATION TLE_405 INSTALL CABINET NOTE: KSF with W/R/S Side View Side View STEP 1d: Install Cabinet to Panel as shown.
  • Page 350 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 1 of 3 Description: OVERHEAD UPMOUNT INSTALLATION TLE_406 Rev. No: 1 Overhead Upmount (KSU) Part and Product Identification A - Overhead Body with Overhead Upmount Back Panel Assembly...
  • Page 351 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 2 of 3 Description: OVERHEAD UPMOUNT INSTALLATION TLE_406 ASSEMBLE NUT AND BOLT ARRANGEMENT MOUNT THE SCREEN STEP 1: Assemble Nut and Bolt arrangement as illustrated. STEP 2: Mount the Screen onto one of the Slots in Table Rail as illustrated.
  • Page 352 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 3 of 3 Description: OVERHEAD UPMOUNT INSTALLATION TLE_406 SECURE THE SCREEN STEP 3: Secure the Screen by rotating the T-Nuts from Horizontal position to Vertical position by using Allen Key as shown.
  • Page 353 (E01-0114) x6 D - Overhead Cabinet (KSF) x qty varies E - 1/4 - 20 UNC Nut Hex KEPS, Zinc (E03-0059) x qty varies F - Leverage Panel (KP_T, KP_S, KP_C) x qty varies 51" High Panel 66" High Panel...
  • Page 354 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 2 of 4 Description: OVERHEAD UPMOUNT RETROFIT KIT TLE_407 UNTIGHTEN THE NUTS UNINSTALL CABINET STEP 2: Uninstall Cabinet as shown. INSTALL OVERHEAD UPMOUNT BACK PANEL 66" High Panel STEP 1: Untighten the Nuts as shown.
  • Page 355 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 3 of 4 Description: OVERHEAD UPMOUNT RETROFIT KIT TLE_407 INSTALL OVERHEAD UPMOUNT BRACKET AND RETAINER CLIP STEP 4: Install Overhead Upmount Bracket and Bracket Retainer Clip as shown.
  • Page 356 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 4 of 4 Description: OVERHEAD UPMOUNT RETROFIT KIT TLE_407 CONNECT CABINET AND BRACKETS SECURE CABINET 51" High Panel STEP 5: Connect Cabinet and Brackets as shown. STEP 6: Secure Cabinet using Screws provided..
  • Page 357 B - End Gable with Hooks (Right) (A15-4813R) x1 C - KSS Bottom Assembly (N01-1183/1148) x1 D - #10 - 3/8 Screw, Steel (E01-0109) x4 E - Leverage Panel (KP_T, KP_S,KP_C) x qty varies NOTE: Max. number of shelves per side of panel is 5.
  • Page 358 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 2 of 3 Description: SHELVES INSTALLATION TLE_408 INSTALL END GABLE STEP 1: Install End Gable as shown.
  • Page 359 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 3 of 3 Description: SHELVES INSTALLATION TLE_408 CONNECT BOTTOM ASSEMBLY SECURE BOTTOM ASSEMBLY STEP 2: Connect Bottom Assembly as shown. STEP 3: Secure Bottom Assembly as shown.
  • Page 360 May 2020 Page No: 1 of 3 Description: HANG-ON WHITE BOARD INSTALLATION TLE_409 Rev. No: 1 Hang-on White Board (KMW) Part and Product Identification A - Hang-on White Board (KMW) x1 B - Leverage Panel (KP_T, KP_S,KP_C) x qty varies...
  • Page 361 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 2 of 3 Description: HANG-ON WHITE BOARD INSTALLATION TLE_409 INSTALL HANG-ON WHITE BOARD Reveserable STEP 1: Install Hang-on White Board as shown.
  • Page 362 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 3 of 3 Description: HANG-ON WHITE BOARD INSTALLATION TLE_409 INSTALL SECOND HANG-ON WHITE BOARD NOTE: Back to Back Hang-On White Board Installation STEP 2: Install second Hang-on White Board as shown.
  • Page 363 MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 1 of 2 Description: ACCESSORY RAIL INSTALLATION TLE_410 Rev. No: 1 Accessory Rail (KMA) Part and Product Identification A - Accessory Rail (KMA) x1 B - Leverage Panel (KP_T, KP_S,KP_C) x qty varies...
  • Page 364 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 2 of 2 Description: ACCESSORY RAIL INSTALLATION TLE_410 INSTALL ACCESSORY TRAIL STEP 1: Install Accessory Trail as shown.
  • Page 365 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 1 of 4 Description: SHELVES INSTALLATION TLE_411 Rev. No: 1 Shelves (KSSN) Part and Product Identification A - Shelf Rod (A19-0659) x2 B - Shelf (N01-1278) x1...
  • Page 366 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 2 of 4 Description: SHELVES INSTALLATION TLE_411 INSTALL SHELF ROD ATTACHMENT STEP 1: Install and secure Shelf Rod using screws provided.
  • Page 367 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 3 of 4 Description: SHELVES INSTALLATION TLE_411 INSTALL SHELF ROD REMOVE TOP TRIM STEP 3: Remove Top Trim INSTALL ANTI DISLODGEMENT BRACKET STEP 2: Install Self Rod using Screws provided..
  • Page 368 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 4 of 4 Description: SHELVES INSTALLATION TLE_411 SECURE SHELF ROD AND BRACKET INSTALL TOP TRIM STEP 5: Secure Shelf Rod and Anti Dislodgement Bracket using Screws provided.
  • Page 369 TLE_412 Rev. No: 1 Centermount Storage Bracket (KUOHC) Part and Product Identification A - Bracket Support for District Overhead on Leverage Panel (A15-8720) x2 B - #8 x 1/2" Self Drilling Screw Washer Head, Quadrex (E01-0478) x4 C - #8 - 10 x 5/8 Flat Quadrex...
  • Page 370 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 2 of 5 Description: CENTERMOUNT STORAGE BRACKET INSTALLATION TLE_412 CONNECT BRACKETS WITH THE FRAME STEP 1: Push Brackets up against the wire trough then push on each side against the vertical frame.
  • Page 371 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 3 of 5 Description: CENTERMOUNT STORAGE BRACKET INSTALLATION TLE_412 SECURE BRACKETS Install Top Trim STEP 2: Fasten Brackets to Metal trough. STEP 3: Install Top Trim. NOTE: Having the Top Trim in place does not affect the Bracket Installation. It can be...
  • Page 372 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 4 of 5 Description: CENTERMOUNT STORAGE BRACKET INSTALLATION TLE_412 SECURE OVERHEAD CABINET AND BRACKETS STEP 4: Place Overhead on top of the Panel. Align pilot holes with Bracket holes and fasten using Screws provided.
  • Page 373 Installation Guides Section: MOUNTED STORAGE AND ACCESSORIES Date: May 2020 Page No: 5 of 5 Description: CENTERMOUNT STORAGE BRACKET INSTALLATION TLE_412 SECURE OVERHEAD CABINET AND BRACKETS Center Mount Support Bracket Installation - Shallow Trough When installing a Center Mount Support Bracket on a shadow trough, Top Trim has to be installed.
  • Page 374 B - #10-32x3/8 Long Machine Screw (PHSCRW1025) x4 C - Counterweight (W2) x1 D - #10x1/2 Pan Quad Block Screw (PHSCRW1001) x2 E - Ledger Pedestal (LPF) Leverage Pedestal (KD) Standard Pedestal (LCD) x1 NOTE: Only Ledger Pedestal (LPF) is shown...
  • Page 375 Installation Guides Section: FREESTANDING STORAGE AND ACCESSORIES Date: July 2020 Page No: 2 of 3 Description: CASTER AND COUNTERWEIGHT TLE_450 UNINSTALL THE DRAWERS PUSH THE SLIDES BACK STEP 1: Uninstall the Drawer STEP 2: Push the Slides back...
  • Page 376 Installation Guides Section: FREESTANDING STORAGE AND ACCESSORIES Date: July 2020 Page No: 3 of 3 Description: CASTER AND COUNTERWEIGHT TLE_450 INSTALL CASTERS AND COUNTERWEIGHTS PUT DRAWER BACK STEP 3a: Secure Casters and Counterweights using screws provided INSTALL CASTERS AND COUNTERWEIGHTS...
  • Page 377 Installation Guides Section: FREESTANDING STORAGE AND ACCESSORIES Date: May 2020 Page No: 1 of 4 Description: PEDESTAL STORAGE AND ACCESSORIES TLE_451 Rev. No: 2 Pedestal Box, File (KDNBF), Pedestal Pencil, Box, File (KDNPBF), Pedestal Part and Product Identification Box, Box, File (KDNBBF), Pedestal Large File, File (KDNLF), Pedestal File,...
  • Page 378 Installation Guides Section: FREESTANDING STORAGE AND ACCESSORIES Date: May 2020 Page No: 2 of 4 Description: PEDESTAL STORAGE AND ACCESSORIES TLE_451 PART/PRODUCT IDENTIFICATION AND WHAT'S INCLUDED KDNBF KDNPBF KDNBBF KDNLF KDNFF KDNSSF PART NO. DESCRIPTION Pencil Tray Drawer Divider...
  • Page 379 Installation Guides Section: FREESTANDING STORAGE AND ACCESSORIES Date: May 2020 Page No: 3 of 4 Description: PEDESTAL STORAGE AND ACCESSORIES TLE_451 WORKSURFACE SUPPORT NOTE : Worksurface support is only available for KDNBBF & KDNLF. Letter-size position A4-size position...
  • Page 380 Installation Guides Section: FREESTANDING STORAGE AND ACCESSORIES Date: May 2020 Page No: 4 of 4 Description: PEDESTAL STORAGE AND ACCESSORIES TLE_451 REMOVE THE DRAWER PUSH THE SLIDES BACK NOTE : Worksurface support is only available for KDNBBF & KDNLF.
  • Page 381 Installation Guides Section: FREESTANDING STORAGE AND ACCESSORIES Date: May 2020 Page No: 1 of 2 Description: STRETCH PEDESTAL TLE_452 Rev. No: 1 Stretch Pedestal (KDE) Part and Product Identification A - Stretch Pedestal (KDE) x1 B - Hanging File Bars...
  • Page 382 Installation Guides Section: FREESTANDING STORAGE AND ACCESSORIES Date: May 2020 Page No: 2 of 2 Description: STRETCH PEDESTAL TLE_452 STRETCH PEDESTAL INSTALLATION INSTRUCTIONS Wrench STEP 1: Slide in the Stretch Pedestal and use Wrench to level the unit...
  • Page 383 Installation Guides Section: FREESTANDING STORAGE AND ACCESSORIES Date: July 2020 Page No: 1 of 3 Description: MOBILE PEDESTAL WITH SEAT TLE_453 Rev. No: 1 Mobile Pedestal with Seat (KDS) Part and Product Identification A - Mobile Pedestal with Seat...
  • Page 384 Installation Guides Section: FREESTANDING STORAGE AND ACCESSORIES Date: July 2020 Page No: 2 of 3 Description: MOBILE PEDESTAL WITH SEAT TLE_453 SLIDE IN MOBILE PEDESTAL WITH SEAT Letter-size position A4-size position STEP 1: Slide in the Mobile Pedestal with Seat...
  • Page 385 Installation Guides Section: FREESTANDING STORAGE AND ACCESSORIES Date: July 2020 Page No: 3 of 3 Description: MOBILE PEDESTAL WITH SEAT TLE_453 INSTALL CASTERS INSTALL COUNTERWEIGHTS NOTE: For installing Counterweight only STEP 2: Secure Casters using screws provided STEP 3: Secure Counterweights using screws provided...
  • Page 386 Installation Guides Section: FREESTANDING STORAGE AND ACCESSORIES Date: May 2020 Page No: 1 of 2 Description: ACCESSORIES TLE_454 Rev. No: 1 Hanging File Bar (DAB), Drawer Divider (DAS), Pencil Tray (DAT), Stationary Part and Product Identification Insert (DAK) A - Hanging File Bar...
  • Page 387 Installation Guides Section: FREESTANDING STORAGE AND ACCESSORIES Date: May 2020 Page No: 2 of 2 Description: ACCESSORIES TLE_454 DRAWER DIVIDER INSTALLATION PENCIL TRAY INSTALLATION STEP 1: Slide in Drawer Divider STEP 1 : Place Pencil Tray HANGING FILE BAR INSTALLATION STATIONARY INSERT INSTALLATION NOTE: 18"D - 8 Slots...
  • Page 388 (FA10) x1 D - Legal-to-Letter Adapter (FA11) x1 E - EDP Adapter (F20) x1 F - T/O/S Stretch Pedestal Chronicle Stretch Pedestal Leverage Stretch Pedestal Ledger Stretch Pedestal (DLS), (SDPE), (KDS), (LPS)x* NOTE: * - Parts/Products listed for reference only...
  • Page 389 Installation Guides Section: FREESTANDING STORAGE AND ACCESSORIES Date: May 2020 Page No: 2 of 4 Description: STRETCH PEDESTAL ACCESORIES TLE_455 HANGING FILE BAR INSTALLATION CROSS FILE BAR INSTALLATION Front to Back Legal Letter STEP 1: Slide in the Hanging File Bar in desired slot as per above...
  • Page 390 Installation Guides Section: FREESTANDING STORAGE AND ACCESSORIES Date: May 2020 Page No: 3 of 4 Description: STRETCH PEDESTAL ACCESORIES TLE_455 DIVIDER PLATE INSTALLATION LEGAL-TO-LETTER ADAPTER INSTALLATION STEP 1: Slide in the divider plate as per above STEP 1: Slide in the Legal-to-Letter Adapter as per above...
  • Page 391 Installation Guides Section: FREESTANDING STORAGE AND ACCESSORIES Date: May 2020 Page No: 4 of 4 Description: STRETCH PEDESTAL ACCESORIES TLE_455 EDP ADAPTER INSTALLATION SILDE IN HANGING FILE BAR STEP 1: Slide in EDP Adapter as per above FLUSH IN...
  • Page 392 Page No: 1 of 6 Description: SIDE FILER SUPPORT KIT TLE_456 Rev. No: 1 Part and Product Identification Side Filer Support Kit (KUSPKS) A -District to Leverage Bottom Bracket (A15-8801)x1 B -Hex Bolt (E03-0125)x1 C -Dislodgement Plate (A15-8795)x1 G -Mini Side Filer...
  • Page 393 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: July 2020 Page No: 2 of 6 Description: SIDE FILER SUPPORT KIT TLE_456 INSTALL CANTILEVER STEP 1: Refer TLE_350 for Cantilever Installation...
  • Page 394 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: July 2020 Page No: 3 of 6 Description: SIDE FILER SUPPORT KIT TLE_456 INSTALL BRACKET INSERT HEX BOLT Side View STEP 2: Install Bracket as per above STEP 3: Insert the Hext Bolt in the hole as per above...
  • Page 395 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: July 2020 Page No: 4 of 6 Description: SIDE FILER SUPPORT KIT TLE_456 FLUSH IN HEX BOLT WITH BRACKET TIGHTEN HEX BOLT STEP 4: Flush in the Hex Bolt with Bracket as per above...
  • Page 396 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: July 2020 Page No: 5 of 6 Description: SIDE FILER SUPPORT KIT TLE_456 VERTICAL & HORIZONTAL MEASUREMENT INSTALL BRACKET, HOOK AND WASHER SCREW 3.235 3.235 NOTE -Vertical and Horizontal measurements shown are measured from bottom and side of cabinets to top and side of Support Brackets.
  • Page 397 Installation Guides Section: WORKSURFACE SUPPORTS AND ACCESSORIES Date: July 2020 Page No: 6 of 6 Description: SIDE FILER SUPPORT KIT TLE_456 INSTALL BRACKET COVER AND FOAM TAPE INSERT WASHER SCREWS STEP 9: Install Bracket Cover and Foam Tape as per above...
  • Page 398 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 1 of 2 Description: BASE CABLE CLIPS TLE_501 Rev. No: 01 Base Cable Clips - Lyft (HBCC) Part and Product Identification A - Base Cable Clips (HBCC) x4...
  • Page 399 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 2 of 2 Description: BASE CABLE CLIPS TLE_501 INSTALL BASE CABLE CLIPS Lyft Panel Clip Cable Foam SIDE VIEW STEP 1: Install the Base Cable Clips to the Panel as shown above.
  • Page 400 Universal Light with Built-In Resettable Breaker (Fluroscent Ligth, type PL-S included.) TU220 (TU222) x1 B - Wire Management Clip (B11-0124) x1 TU222 *C - Mounted Storage (KSF, KSU, KSR, KSS) *D - Leverage Panel (KP_T, KP_S, KP_C) * Parts/Products listed for reference ONLY...
  • Page 401 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 2 of 3 Description: UNIVERSAL LIGHT TLE_502 PLACE LIGHT ONTO MOUNTED STORAGE Magnets SIDE VIEW NOTE: To ensure secure connection, light must be positioned as shown. STEP 1: Place the Universal Light onto the Mounted Storage as shown above.
  • Page 402 Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 3 of 3 Description: UNIVERSAL LIGHT TLE_502 REMOVE PORTION OF WIRE MANAGEMENT CLIP STEP 2: Remove the portion of the Wire Management Clip ONLY when installing a Leverage Overhead Upmount.
  • Page 403 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 1 of 6 Description: UTILITY LIGHTS TLE_503 Rev. No: 01 Utility Light with Standard Plug (TYQ360), Utility Light with Built-In Ressetable Part and Product Identification Breaker (TYQ362)
  • Page 404 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 2 of 6 Description: UTILITY LIGHTS TLE_503 INSERT MOUNTING BRACKET ASSEMBLY STEP 1: Insert the Mounting Bracket Assembly into the Utility Light as shown above.
  • Page 405 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 3 of 6 Description: UTILITY LIGHTS TLE_503 SECURE MOUNTING BRACKET STEP 2: Secure the Mounting Brackets onto the Utility Light using the Screws provided as shown above.
  • Page 406 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 4 of 6 Description: UTILITY LIGHTS TLE_503 INSERT UTILITY LIGHT ASSEMBLY STEP 3: Insert the Utility Light Assembly onto the Overhead Cabinet as shown above.
  • Page 407 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 5 of 6 Description: UTILITY LIGHTS TLE_503 INSERT WIRE MANAGEMENT CLIP STEP 4: Insert the Wire Management Clip as shown above.
  • Page 408 Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 6 of 6 Description: UTILITY LIGHTS TLE_503 REMOVE PORTION OF WIRE MANAGEMENT CLIP STEP 5: Remove portion of the Wire Management Clip ONLY when installing with a Leverage Overhead Upmount.
  • Page 409 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 1 of 5 Description: UTILITY LIGHTS TLE_504 Rev. No: 01 Part and Product Identification Utility Light With Standard Plug (TYRQ), Utility Light with Built-In Resettable A - Utility Light w/Standard Plug...
  • Page 410 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 2 of 5 Description: UTILITY LIGHTS TLE_504 INSERT MOUNTING BRACKETS FASTEN SCREWS STEP 1: Slide the Mounting Brackets into the Utility Light as shown above. STEP 2: Secure the Mounting Brackets using the Screws provided.
  • Page 411 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 3 of 5 Description: UTILITY LIGHTS TLE_504 ATTACH UTILITY LIGHT STEP 3: Attach the Utility Light to the Overhead Cabinet as shown above.
  • Page 412 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 4 of 5 Description: UTILITY LIGHTS TLE_504 INSTALL WIRE MANAGEMENT CLIP STEP 4: Install the Wire Management Clip as shown above.
  • Page 413 LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 5 of 5 Description: UTILITY LIGHTS TLE_504 REMOVE PORTION OF WIRE MANAGEMENT CLIP NOTE: Remove portion of the Wire Management Clip (as shown) ONLY when installing with a Leverage Overhead Upmount.
  • Page 414 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 1 of 12 Description: BASE FEED TLE_505a Rev. No: 01 Base Feed - Standard Panel (EKBF), Chicago Base Feed (EKBFCH), Split Base Feed - Standard Panel (EKBFS),...
  • Page 415 C - 10-16x7/16'' Quadrex Screw, Type B, Pan Head #2 (B02-0148) x1 for EKBF, EKBFS, EKBFCH (FS10x7/16QTB) x3 for EKBF,EKBFCH 5 for EKBFS D - NY Split Base Feed Box Leverage I - Communication Bezel (MBC-BFK-NY-LEV) x1 for EKBFS (B02-0149) x1 for EBFQC E - Leverage Split Base Feed Mfg.
  • Page 416 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 3 of 12 Description: BASE FEED TLE_505a REMOVE ELEMENTS LAY PANEL ON GROUND STEP 1: Remove the Panel Elements as shown above. STEP 2: Lay the Panel Element on the flat ground.
  • Page 417 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 3 of 12 Description: BASE FEED TLE_505a LOCATE BASE FEED RECEPTACLE PLATE Line up holes STEP 3: Locate the Base Feed Receptacle Plate on the Element Frame and use it as the cutting template.
  • Page 418 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 5 of 12 Description: BASE FEED TLE_505a CUT ELEMENT PEEL FABRIC STEP 4: Cut an "X" through the Element from corner to corner. STEP 5: Peel back fabric. Cut fibre glass in a square and remove.
  • Page 419 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 6 of 12 Description: BASE FEED TLE_505a INSTALL BASE FEED RECEPTACLE PLATE SPRAY ADHESIVE Adhesive STEP 6: Install the Base Feed Receptacle Plate using the Screws provided.
  • Page 420 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 7 of 12 Description: BASE FEED TLE_505a INSTALL BEZEL INSTALL MOUNTING BRACKET NOTE: Installation of Communication Bezel (EBFQC) is the same procedure up to this step. Data cables may be routed into the interior of the panel at this point.
  • Page 421 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 8 of 12 Description: BASE FEED TLE_505a FASTEN SCREWS STEP 10: Secure the Base Feed Mounting Bracket using the Screws provided.
  • Page 422 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 9 of 12 Description: BASE FEED TLE_505a BASE FEED (EKBF) AND CHICAGO BASED FEED (EKBFCH) INSTALLATION Front Back STEP 10: Install Base Feed or Chicago Base Feed as shown above.
  • Page 423 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 10 of 12 Description: BASE FEED TLE_505a CONNECT POWER HARNESS Power Harness Floor Monument NOTE2: Connection to available power source has to be done by licensed electrician.
  • Page 424 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 10 of 12 Description: BASE FEED TLE_505a SPLIT BASE FEED (EKBFS) INSTALLATION Front Back STEP 12: For Split Base Feed installation, repeat steps 1 through 11.
  • Page 425 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 12 of 12 Description: BASE FEED TLE_505a INSTALL SPLIT BASE FEED ENCLOSURE IMPORTANT NOTE: Recommended installation of Split Feed Base must be done by licensed electrician in accordance with applicable codes and regulations.
  • Page 426 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 1 of 11 Description: BASE FEED TLE_505b Rev. No: 01 Base Feed - Elevated Panel (EKBF), Chicago Base Feed (EKBFCH), Split Base Feed - Standard Panel (EKBFS),...
  • Page 427 C - 10-16x7/16'' Quadrex Screw, Type B, Pan Head #2 (B02-0148) x1 for EKBF, EKBFS, EKBFCH (FS10x7/16QTB) x3 for EKBF,EKBFCH 5 for EKBFS D - NY Split Base Feed Box Leverage I - Communication Bezel (MBC-BFK-NY-LEV) x1 for EKBFS (B02-0149) x1 for EBFQC E - Leverage Split Base Feed Mfg.
  • Page 428 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 3 of 11 Description: BASE FEED TLE_505b REMOVE ELEMENTS PLACE BASE FEED Position of Base Feed on Elevated Rail Place Base Feed on Rail Mark and Predrill Plan View STEP 1: Remove the Panel Elements as shown above.
  • Page 429 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 4 of 11 Description: BASE FEED TLE_505b FASTEN BASE FEED BRACKET STEP 3: Fasten The Base Feed Bracket using the Screws provided as shown above.
  • Page 430 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 5 of 11 Description: BASE FEED TLE_505b INSTALL BASE FEED Back Front STEP 4: Install the Base Feed using the Screws provided.
  • Page 431 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 6 of 11 Description: BASE FEED TLE_505b RE-INSTALL ELEMENT CUT ELEMENT Back STEP 5: Re-install the Panel Element as shown above. STEP 6: Cur an "X" through the Element from corner to corrner.
  • Page 432 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 7 of 11 Description: BASE FEED TLE_505b CUT FIBRE GLASS INSTALL RECEPTACLE PLATE STEP 7: Peel back fabric. Cut fibre glass in a square and remove. STEP 8: Install the Receptacle Plate onto the Panel as shown above.
  • Page 433 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 8 of 11 Description: BASE FEED TLE_505b SPRAY ADHESIVE INSTALL BEZELS Adhesive NOTE: Installation of Communication Bezel (EBFQC) is the same procedure up to this step. Data cables may be routed into the interior of the panel at this point.
  • Page 434 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 9 of 11 Description: BASE FEED TLE_505b CONNECT POWER HARNESS Power Harness Floor Monument NOTE2: Connection to available power source has to be done by licensed electrician.
  • Page 435 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 10 of 11 Description: BASE FEED TLE_505b SPLIT BASE FEED (EKBFS) INSTALLATION Front Back STEP 12: For Split Base Feed installation, repeat steps 1 through 11.
  • Page 436 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 11 of 11 Description: BASE FEED TLE_505b INSTALL SPLIT BASE FEED ENCLOSURE IMPORTANT NOTE: Recommended installation of Split Feed Base must be done by licensed electrician in accordance with applicable codes and regulations.
  • Page 437 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 1 of 10 Description: CEILING FEED TLE_506 Rev. No: 01 Ceiling Feed (EKCF), Chicago Ceiling Feed (EKCFCH), Power Pole (ECPQ) Part and Product Identification A - Power Pole Body...
  • Page 438 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 2 of 10 Description: CEILING FEED TLE_506 Rev. No: 01 Part and Product Identification (Continued) M - #8x3/8'' Quad Truss, Type B russ Head (FS8X3/8TAP) x 0 for ECPQ1 and 2 for ECPQ2...
  • Page 439 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 3 of 10 Description: CEILING FEED TLE_506 REMOVE PANEL ELEMENTS INSTALL MOUNTING BRACKET STEP 1: Remove the Panel Elements and the Pole as shown above. STEP 2: Install the Mounting Bracket onto the Panels using the Screws provided.
  • Page 440 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 4 of 10 Description: CEILING FEED TLE_506 INSERT POWER POLE FASTEN SCREWS STEP 3: Slide the Power Pole into the Bracket as shown above. STEP 4: Secure the Power Pole using the Screws provided.
  • Page 441 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 5 of 10 Description: CEILING FEED TLE_506 CREATE CUTOUT 3 1/2'' 3 1/2'' Acoustic Ceiling Tile Double Power Box STEP 5: Create a cutout on the Acoustic Ceiling Tile with the dimensions shown above.
  • Page 442 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 6 of 10 Description: CEILING FEED TLE_506 INSTALL CEILING FEED Communication Cables Communication Cables Discard Coupler IF Power Pole Harness is long enough to reach the Power Box...
  • Page 443 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 7 of 10 Description: CEILING FEED TLE_506 INSERT CEILING PLATES SECURE CEILING PLATES **Must connect to power source by a licensed electrician. STEP 7: Insert the Ceiling Plates as shown above.
  • Page 444 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 8 of 10 Description: CEILING FEED TLE_506 REPLACE CORNER CAP WITH CORNER TRIM STEP 9: Re-install the Panel Elements. Replact the Corner Cap with the Corner Trim.
  • Page 445 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 9 of 10 Description: CEILING FEED TLE_506 REMOVE TOP TRIM INSTALL MOUNTING BRACKET NOTE: Place Power Pole close to a large cut-out to allow proper wire routing.
  • Page 446 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 10 of 10 Description: CEILING FEED TLE_506 INSTALL POWER POLE INSTALL TRIM CAPS STEP 10c: Repeat Steps 5-8 to complete the Power Pole installation. STEP 10d: Cut the Trim with a gap of 5'' apart. Install the Trims onto the Panel as shown...
  • Page 447 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 1 of 10 Description: ELECTRICS TLE_507a Rev. No: 01 Power Harness (EKBH), Power Box (EKQP), Receptacle (EKRO), Distribution Part and Product Identification Box (EKDB) A - Mesh Power Harness (24'')
  • Page 448 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 2 of 10 Description: ELECTRICS TLE_507a INSTALL HOOK POWER BOX (EKQP) INSTALLATION - WORKSURFACE LEVEL Remove Loosen Screw (F) Slide in WARNING: Power MUST be Tighten Screw turned off during all installation or reconfiguration work.
  • Page 449 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 3 of 10 Description: ELECTRICS TLE_507a INSTALL POWER BOX Double Power Box Single Power Box STEP 1b: Install the Power Box using the Screws provided.
  • Page 450 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 4 of 4 Description: ELECTRICS TLE_507a INSTALL RECEPTACLES WARNING: Power MUST be turned off during all installation or reconfiguration work. Push in place STEP 1c: Insall the Receptacles using the Screws provided as shown above.
  • Page 451 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 5 of 10 Description: ELECTRICS TLE_507a INSTALL HARNESS AND POWER DISTRIBUTION BLOCK HARNESS (EKBH) AND POWER DISTRIBUTION BLOCK (EKDB) INSTALLATION WARNING: Power MUST be turned off during all installation or reconfiguration work.
  • Page 452 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 6 of 10 Description: ELECTRICS TLE_507a RE-INSTALL PANEL ELEMENTS STEP 2b: Re-install the Panel Elements as shown above.
  • Page 453 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 7 of 10 Description: ELECTRICS TLE_507a INSTALL HOOK POWER BOX (EKQP) INSTALLATION - BASE LEVEL Slide in Remove Loosen (F) Tighten Screw WARNING: Power MUST be turned off during all installation or reconfiguration work.
  • Page 454 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 8 of 10 Description: ELECTRICS TLE_507a INSTALL POWER BOX NOTE: Remove applicable screws (D) from Hook (C) and use them to attach power box (B) STEP 3b: Install the Power Box to the Hook using the Screws provided.
  • Page 455 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 9 of 10 Description: ELECTRICS TLE_507a INSTALL RECEPTACLES NOTE: Remove 2 screws (E) from Hook (C) and use them to attach Receptacles (G) to Power Box. If Double Sided Power Box is specified, continue on other side of Power Box using remaining two screws.
  • Page 456 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 10 of 10 Description: ELECTRICS TLE_507a RE-INSTALL PANEL ELEMENT REMOVE RECEPTACLE (OPTIONAL) WARNING! Power must be turned off during all installation or reconfiguration work. STEP 4d: Re-install the Panel Element as shown above.
  • Page 457 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 1 of 5 Description: CHICAGO POWER BOX TLE_507b Rev. No: 01 Chicago Power Box (EKQPCH) Part and Product Identification A - Chicago Power Box Single (Single or Double Sided)
  • Page 458 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 2 of 5 Description: CHICAGO POWER BOX TLE_507b INSTALL BEZELS LOOSEN AND REMOVE SCREWS Remove Loosen STEP 1a: Remove the left and middle Receptacles on the Panel Element. Install the Bezels as STEP 1b: Loosen the Screws on the Chicago Power Box and remove them as shown above.
  • Page 459 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 3 of 5 Description: CHICAGO POWER BOX TLE_507b INSTALL CHICAGO POWER BOX RE-INSTALL PANEL ELEMENT Tighten NOTE: Cables have to be provided and installed by Professional Electrician in accordance with applicable codes and regulations.
  • Page 460 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 4 of 5 Description: CHICAGO POWER BOX TLE_507b LOOSEN AND REMOVE SCREWS (BASE LEVEL CHICAGO POWER BOX) Remove Screw Loosen Screw STEP 2a: For installing Base Level Chicago Power Boxes, loosen the Screws on the Power Box and remove the Screws.
  • Page 461 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 5 of 5 Description: CHICAGO POWER BOX TLE_507b INSTALL BASE POWER BOX INSTALL BEZELS Tighten Screw STEP 2b: Install the Base Power Box onto the Panel Base using the same Screws provided.
  • Page 463 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 1 of 6 Description: INTERNATIONAL OUTLET BOX AND INTERNATIONAL COMMUNICATIONS MOUNTING KIT INSTALLATION TLE_509 Rev. No: 1 International Outlet Box (VED), International Communications Mounting Kit (VERZC)
  • Page 464 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 2 of 6 Description: INTERNATIONAL OUTLET BOX AND INTERNATIONAL COMMUNICATIONS MOUNTING KIT INSTALLATION TLE_509 Rev. No: 1 Part and Product Identification VED_ VERZC A - International Mounting Bracket (A15-4229) B - #10 x 1/2"L.
  • Page 465 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 3 of 6 Description: INTERNATIONAL OUTLET BOX AND INTERNATIONAL COMMUNICATIONS MOUNTING KIT INSTALLATION TLE_509 REMOVE FABRIC ELEMENT USE COMMUNICATION PLATE AS TEMPLATE STEP 1: Remove Fabric Element.
  • Page 466 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 4 of 6 Description: INTERNATIONAL OUTLET BOX AND INTERNATIONAL COMMUNICATIONS MOUNTING KIT INSTALLATION TLE_509 CUT AN "X" THROUGH THE ELEMENT CUT FIBRE GLASS IN A SQUARE STEP 4: Cut an "X" through the Element from corner to corner then turn the Element over.
  • Page 467 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 5 of 6 Description: INTERNATIONAL OUTLET BOX AND INTERNATIONAL COMMUNICATIONS MOUNTING KIT INSTALLATION TLE_509 FASTEN PLATES REMOVE PLUGS Front Back STEP 9: Remove Plugs INSTALL MOUNTING BRACKET STEP 8: Fasten Plates as shown.
  • Page 468 Installation Guides Section: LIGHTING, ELECTRICS AND COMMUNICATIONS Date: May 2020 Page No: 6 of 6 Description: INTERNATIONAL OUTLET BOX AND INTERNATIONAL COMMUNICATIONS MOUNTING KIT INSTALLATION TLE_509 SECURE MOUNTING BRACKET INSTALL ELEMENTS STEP 11: Secure Mounting Bracket using Screws provided.
  • Page 470 Installation Guides Section: LIGHTINGS, ELECTRICS, AND COMMUNICATIONS Date: May 2020 Page No: 1 of 6 Description: END OF RUN POWER POLE TLE_511 Rev. No: 0 End of Run Power Pole (ECPQR) Part and Product Identification B - Machine Screw A - 29"...
  • Page 471 Installation Guides Section: LIGHTINGS, ELECTRICS, AND COMMUNICATIONS Date: May 2020 Page No: 2 of 6 Description: END OF RUN POWER POLE TLE_511 MOUNT END RUN BRACKET CONNECT POWER MODULE STEP 1: Mount Extension Plate with screws and nuts provided, as shown above.
  • Page 472 Installation Guides Section: LIGHTINGS, ELECTRICS, AND COMMUNICATIONS Date: May 2020 Page No: 3 of 6 Description: END OF RUN POWER POLE TLE_511 CEILING CUTOUT CONNECT UPPER POWER POLE Acoustic Ceiling Tile STEP 3: Create Cutout on the Ceiling Tile as shown above.
  • Page 473 Installation Guides Section: LIGHTINGS, ELECTRICS, AND COMMUNICATIONS Date: May 2020 Page No: 4 of 6 Description: END OF RUN POWER POLE TLE_511 MOUNT CEILING FEED CABLE MANAGEMENT Communication Cables Power Cables STEP 5: Mount Ceiling Feed as shown above.
  • Page 474 Installation Guides Section: LIGHTINGS, ELECTRICS, AND COMMUNICATIONS Date: May 2020 Page No: 5 of 6 Description: END OF RUN POWER POLE TLE_511 ATTACH LOWER POWER POLE COVER ATTACH UPPER POWER POLE COVER STEP 6: Attach Lower Power Pole Cover as shown above.
  • Page 475 Installation Guides Section: LIGHTINGS, ELECTRICS, AND COMMUNICATIONS Date: May 2020 Page No: 6 of 6 Description: END OF RUN POWER POLE TLE_511 MOUNT CEILING PLATES FASTEN CEILING FEED STEP 8: Mount Ceiling Plates as shown above. STEP 9: Using hardware provided, fasten Ceiling Plate to the ceiling as shown above.
  • Page 476 Installation Guides Section: LIGHTINGS, ELECTRICS, AND COMMUNICATIONS Date: May 2020 Page No: 1 of 2 Description: CALA POWER STATION TLE_512 Rev. No: 0 CALA Power Station (VBWB) Part and Product Identification A - Worksurface B - CALA Power Station...
  • Page 477 Installation Guides Section: LIGHTINGS, ELECTRICS, AND COMMUNICATIONS Date: May 2020 Page No: 2 of 2 Description: CALA POWER STATION TLE_512 PLACE POWER STATION FASTEN THUMB SCREWS For Knife Edge Worksurface STEP 1: Place Power Station as shown above. STEP 2: Fasten Thumb Screws...
  • Page 478 Installation Guides Section: LIGHTINGS, ELECTRICS, AND COMMUNICATIONS Date: May 2020 Page No: 1 of 7 Description: POWER CONSERVATION SYSTEM TLE_513 Rev. No: 0 Power Conservation System (EKPC) Part and Product Identification A - Power Conservation System (Control Box - 12.11) x 1 B - #10 - 24 Screw (FS10-24x0.75 QRZ) x 2...
  • Page 479 Installation Guides Section: LIGHTINGS, ELECTRICS, AND COMMUNICATIONS Date: May 2020 Page No: 2 of 7 Description: POWER CONSERVATION SYSTEM TLE_513 MOUNT POWER CONSERVATION UNIT CONNECT POWER MODULE NOTE: STEP 1: Mount Power Conservation Unit as shown above. STEP 2: Connect Power Conservation Module to Power Module.
  • Page 480 Installation Guides Section: LIGHTINGS, ELECTRICS, AND COMMUNICATIONS Date: May 2020 Page No: 3 of 7 Description: POWER CONSERVATION SYSTEM TLE_513 CONNECT CAT5 CABLE CONNECT POWER MODULE NOTE: STEP 3: Mount Power Conservation Unit as shown above. STEP 4: Connect Power Conservation Module to Power Module.
  • Page 481 Installation Guides Section: LIGHTINGS, ELECTRICS, AND COMMUNICATIONS Date: May 2020 Page No: 4 of 7 Description: POWER CONSERVATION SYSTEM TLE_513 ASSEMBLE ELEMENTS ASSEMBLE WORKSURFACES AND SUPPORTS STEP 5: Assemble Elements as shown above. STEP 6: Assemble Worksurfaces and Supports as shown above.
  • Page 482 Installation Guides Section: LIGHTINGS, ELECTRICS, AND COMMUNICATIONS Date: May 2020 Page No: 5 of 7 Description: POWER CONSERVATION SYSTEM TLE_513 SENSOR LOCATION ASSEMBLE WORKSURFACES AND SUPPORTS STEP 7: Attach Sensors with screws provided as shown above. NOTE: Sensor placement is dictated by location of user, positioning of power conservation...
  • Page 483 Installation Guides Section: LIGHTINGS, ELECTRICS, AND COMMUNICATIONS Date: May 2020 Page No: 6 of 7 Description: POWER CONSERVATION SYSTEM TLE_513 CONNECT TO SENSOR CONNECT ADDITIONAL CAT5 TO SENSOR STEP 8: Using CAT5 Cable, connect sensors as shown above. STEP 9: Connect Additional CAT5 to Sensors as shown above.
  • Page 484 Installation Guides Section: LIGHTINGS, ELECTRICS, AND COMMUNICATIONS Date: May 2020 Page No: 7 of 7 Description: POWER CONSERVATION SYSTEM TLE_513 CONNECT ADDTIONAL CAT5 CABLE TO SENSOR STEP 10: Organize Wires as shown above.
  • Page 485 Installation Guides Section: LIGHTINGS, ELECTRICS, AND COMMUNICATIONS Date: May 2020 Page No: 1 of 5 Description: CALA POWER SYSTEMS TLE_514 Rev. No: 0 CALA Power Module (VBCL), CALA Power Jumper Harness (VBPH), Power Part and Product Identification Infeed (VBPL)
  • Page 486 Installation Guides Section: LIGHTINGS, ELECTRICS, AND COMMUNICATIONS Date: May 2020 Page No: 2 of 5 Description: CALA POWER SYSTEMS TLE_514 MOUNT POWER UNIT FASTEN SCREWS STEP 1: Mount Power Unit as shown above. STEP 2: Using Screws provided, secure Power Unit.
  • Page 487 Installation Guides Section: LIGHTINGS, ELECTRICS, AND COMMUNICATIONS Date: May 2020 Page No: 3 of 5 Description: CALA POWER SYSTEMS TLE_514 SECURE POWER INFEED - 1 WIRE LAYOUT STEP 3a: Secure Power Infeed as shown above. NOTE : The length of A+B+C should not exceed 1meter or 39.3". If length exceeds 1 meter,...
  • Page 488 Installation Guides Section: LIGHTINGS, ELECTRICS, AND COMMUNICATIONS Date: May 2020 Page No: 4 of 5 Description: CALA POWER SYSTEMS TLE_514 SECURE POWER INFEED - 2 STEP 3b: Organize Wires as shown above.
  • Page 489 Installation Guides Section: LIGHTINGS, ELECTRICS, AND COMMUNICATIONS Date: May 2020 Page No: 5 of 5 Description: CALA POWER SYSTEMS TLE_514 MOUNT BAZEL NOTE: For Bezel mounting instructions, see Installtion Guide TLE_508.
  • Page 490 Installation Guides Section: SCREENS Date: May 2020 Page No: 1 of 3 Description: LATERAL SCREENS TLE_550 Rev. No: 0 Lateral Screens (GNGL, GNLL, GNML, GNSL, GNWL, GNXL, GNYL, Part and Product Identification GNZL) A - 6mm Lateral Glass Screen...
  • Page 491 Installation Guides Section: SCREENS Date: May 2020 Page No: 2 of 3 Description: LATERAL SCREENS TLE_550 FIT SCREEN TO WORKSURFACE MOUNT SCREEN ASSEMBLY TO TABLE Side View STEP 1: Fit Screen to Worksurface as shown above. STEP 2: Snap the back bracket into place and rest the bottom of the screen on the...
  • Page 492 Installation Guides Section: SCREENS Date: MAY 2020 Page No: 3 of 3 Description: LATERAL SCREENS TLE_550 TIGHEN SCREEN ASSEMBLY Side View STEP 2: Turn the Thumb Screw counter-clockwise to tighten the screen assembly into place so that it is secure to the Worksurface.
  • Page 493 Installation Guides Section: SCREENS Date: May 2020 Page No: 1 of 5 Description: INFINITY DESK SCREEN TLE_551 Rev. No: 0 Infinity Desk Edge Screen (GXDL), Infinity Desk Edge Floor Screen (GXFL) Part and Product Identification A1 - Infinity Desk Edge Floor Screen Assy.
  • Page 494 Installation Guides Section: SCREENS Date: May 2020 Page No: 2 of 5 Description: INFINITY DESK SCREEN TLE_551 MOUNT BRACKETS TO SCREEN MOUNT SCREEN ASSEMBLY TO TABLE STEP 1: Mount Wire Management Bracket as shown above. STEP 2: Mount Fabric Screen Mounting Brackets with Nuts provided.
  • Page 495 Installation Guides Section: SCREENS Date: May 2020 Page No: 3 of 5 Description: INFINITY DESK SCREEN TLE_551 MOUNT BRACKETS TO SCREEN MOUNT SCREEN ASSEMBLY TO TABLE STEP 3: Mount Screen Cover to Screen as shown above with Nuts provided.
  • Page 496 Installation Guides Section: SCREENS Date: May 2020 Page No: 4 of 5 Description: INFINITY DESK SCREEN TLE_551 ADJUST LEVELLER CORRECT TILTING ANGLE STEP 5: Adjust Levellers as shown above. NOTE: Check Tilting Angle as shown above.
  • Page 497 Installation Guides Section: SCREENS Date: May 2020 Page No: 5 of 5 Description: INFINITY DESK SCREEN TLE_551 ADJUSTMENT ON TILTING OUTWARD ADJUSTMENT ON TILTING INWARD STEP 6: If the Screen is tilting outward, add spacer to the front screws...
  • Page 498 Installation Guides Section: SCREENS Date: May 2020 Page No: 1 of 3 Description: DESK EDGE SCREEN TLE_552 Rev. No: 0 Infinity Side Desk Edge Floor Screen (GXEL), Infinity Side Desk Edge Screen Part and Product Identification (GXSL) A1 - Infinity Side Desk Edge Floor Screen Assy.
  • Page 499 Installation Guides Section: SCREENS Date: May 2020 Page No: 2 of 3 Description: DESK EDGE SCREEN TLE_552 MOUNT WIRE MANAGEMENT BRACKET MOUNTING BRACKET ORIENTATION Right Left STEP 1: Mount Wire Management Bracket as shown above. NOTE: For 18" depth, remove brackets to fit the right or left configuration as shown in Step 2.
  • Page 500 Installation Guides Section: SCREENS Date: May 2020 Page No: 3 of 3 Description: DESK EDGE SCREEN TLE_552 MOUNT SCREEN ASSEMBLY TO TABLE ADJUST LEVELLERS STEP 4: Mount Screen Assembly to Table with Screws Provided. STEP 5: Rotate Levellers to level Side Desk Edge.
  • Page 501 Installation Guides Section: SCREENS Date: May 2020 Page No: 1 of 5 Description: CURVED DESK EDGE SCREEN TLE_553 Rev. No: 0 Curved Desk Edge Screen (GXCL), Infinity Screen Alignment Clip (GXCC) Part and Product Identification A - Infinity Side Curved Desk Edge Screen Assy...
  • Page 502 Installation Guides Section: SCREENS Date: May 2020 Page No: 2 of 5 Description: CURVED DESK EDGE SCREEN TLE_553 MOUNT WIRE MANAGEMENT BRACKET MOUNT FABRIC SCREEN MOUNTING BRACKETS STEP 1: Mount Wire Management Bracket as shown above. STEP 2: Mount Fabric Screen Mounting Brackets and End Cover with Nuts provided.
  • Page 503 Installation Guides Section: SCREENS Date: May 2020 Page No: 3 of 5 Description: CURVED DESK EDGE SCREEN TLE_553 MOUNT SCREEN ASSEMBLY TO TABLE TILT ANGLE Tilting Outwards Tilting Inwards No Tilting STEP 5: Mount Screen Assembly to Table with Screws Provided.
  • Page 504 Installation Guides Section: SCREENS Date: May 2020 Page No: 4 of 5 Description: CURVED DESK EDGE SCREEN TLE_553 ADJUSTMENT ON TILTING OUTWARD ADJUSTMENT ON TILTING INWARD STEP 7a: If the Screen is tilting outward, add spacer to the front screws...
  • Page 505 Installation Guides Section: SCREENS Date: May 2020 Page No: 5 of 5 Description: CURVED DESK EDGE SCREEN TLE_553 ASSEMBLE CLIPS WITH SET SCREWS TIGHTEN CLIPS STEP 8: Assemble Alignment Clips as shown above. NOTE: Do not fully tighten them.
  • Page 506 Installation Guides Section: SCREENS Date: May 2020 Page No: 1 of 4 Description: FRAMED DESK EDGE SCREEN INSTALLATION TLE_554 Rev. No: 1 Framed Desk Edge Screen (GYDL), Framed Floor Desk Edge Screen (GYFL) Part and Product Identification A - Framed Floor Desk Edge Screen...
  • Page 507 Installation Guides Section: SCREENS Date: May 2020 Page No: 2 of 4 Description: FRAMED DESK EDGE SCREEN INSTALLATION TLE_554 ATTACH MOUNTING BRACKETS ATTACH SCREEN TO WORKSURFACE STEP 1: Attach the Mounting Brackets to the Screen using the Machine Screws provided.
  • Page 508 Installation Guides Section: SCREENS Date: May 2020 Page No: 3 of 4 Description: FRAMED DESK EDGE SCREEN INSTALLATION TLE_554 INSTALL PLASTIC SPACERS (IF REQUIRED) Tilting Outwards STEP 3: If the Screen is tilting outwards, loosen the front Wood Screw, place the Plastic Spacer, and tighten the Wood Screw.
  • Page 509 Installation Guides Section: SCREENS Date: May 2020 Page No: 4 of 4 Description: FRAMED DESK EDGE SCREEN INSTALLATION TLE_554 INSTALL PLASTIC SPACERS (IF REQUIRED) Tilting Inwards STEP 4: If the Screen is tilting Inwards, loosen the back Wood Screw, place the Plastic Spacer, and tighten the Wood Screw.
  • Page 510 Installation Guides Section: SCREENS Date: May 2020 Page No: 1 of 7 Description: SIDE DESK EDGE SCREEN INSTALLATION TLE_555 Rev. No: 1 Framed Side Desk Edge Screen (GYSL), Framed Side Floor Desk Edge Screen Part and Product Identification (GYEL) 18"...
  • Page 511 Installation Guides Section: SCREENS Date: May 2020 Page No: 2 of 7 Description: SIDE DESK EDGE SCREEN INSTALLATION TLE_555 ATTACH BRACKET PLATE (18" WIDE ONLY) Left Side Screen Right Side Screen 18" Wide Version Only STEP 1: Fasten the Adapter Plate to the Screen using the Machine Screws provided.
  • Page 512 Installation Guides Section: SCREENS Date: May 2020 Page No: 3 of 7 Description: SIDE DESK EDGE SCREEN INSTALLATION TLE_555 ATTACH BRACKETS (18" WIDE ONLY) ATTACH BRACKETS STEP 3: Attach Brackets to Screen using the Machine Srews provided. STEP 2: Attach Brackets to the Plate using the 1/4-20 Nuts provided.
  • Page 513 Installation Guides Section: SCREENS Date: May 2020 Page No: 4 of 7 Description: SIDE DESK EDGE SCREEN INSTALLATION TLE_555 CONNECT SCREENS (IF APPLICABLE) STEP 4: Remove Desk Edge Screen End Cap and attach Side Screen. NOTE : Only applicable if Connected configuration is selected.
  • Page 514 Installation Guides Section: SCREENS Date: May 2020 Page No: 5 of 7 Description: SIDE DESK EDGE SCREEN INSTALLATION TLE_555 ATTACH SCREEN TO WORKSURFACE 18" Wide Version Shown STEP 5: Attach Screen to Worksurface using Wood Screws provided.
  • Page 515 Installation Guides Section: SCREENS Date: May 2020 Page No: 6 of 7 Description: SIDE DESK EDGE SCREEN INSTALLATION TLE_555 INSTALL PLASTIC SPACERS (IF REQUIRED) Tilting Outwards STEP 6: If the Screen is tilting outwards, loosen the front Wood Screw, place the Plastic Spacer, and tighten the Wood Screw.
  • Page 516 Installation Guides Section: SCREENS Date: May 2020 Page No: 7 of 7 Description: SIDE DESK EDGE SCREEN INSTALLATION TLE_555 INSTALL PLASTIC SPACERS (IF REQUIRED) Tilting Inwards STEP 7: If the Screen is tilting Inwards, loosen the back Wood Screw, place the Plastic Spacer, and tighten the Wood Screw.