Removing The Power Button With Fingerprint Reader - Dell G7 7700 Service Manual

Removing the power button with fingerprint reader

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the rear cover.
4. Remove the rear-cover
5. Remove the graphics-card
6. Remove the system board.
NOTE: The system board can be removed and installed along with the heat sink. This simplifies the removal and
installation procedure and prevents damage to the thermal bond between the system board and heat sink.
About this task
The following image indicates the location of the power button with fingerprint reader and provides a visual representation of the removal
procedure.
Steps
1. Lift the power button with fingerprint reader off the palm-rest and keyboard assembly.
2. Remove the two screws (M1.6x1.8) that secure the power-button bracket to the palm-rest and keyboard assembly.
Before working inside your
bracket.
fan.
computer.
Removing and installing components 59