Advertisement
Quick Links
1
Start Here
Quickstart Guide - AyrMesh™ Receiver
Check the contents of the box:
• AyrMesh Receiver
• Power Supply
• Power Cord
• (2) Ethernet Cables
• Zip Tie (not shown)
POE
LAN
Visit Ayrstone.com/support
for detailed instructions,
videos, slide shows, and a
troubleshooting guide.
Write down the MAC
address of your Receiver and
keep it in a safe place
MAC Address
If you don't have one,
sign up for an account
on AyrMesh.com
Use a computer connected
to the same router as your
Gateway Hub!
MAC - 11:22:33:44:55:66
Advertisement
Related Manuals for AYRSTONE AyrMesh
Summary of Contents for AYRSTONE AyrMesh
- Page 1 Start Here Quickstart Guide - AyrMesh™ Receiver Visit Ayrstone.com/support for detailed instructions, videos, slide shows, and a troubleshooting guide. Write down the MAC Check the contents of the box: address of your Receiver and keep it in a safe place •...
- Page 2 DO NOT FORCE CABLES INTO OR OUT OF PORTS! The left two lights on the Receiver should be lit up: Slide the cover back onto the Hub Make sure you have an account on AyrMesh.com...
- Page 3 The Receiver should be mounted outside, to download the configuration parameters for up as high as possible, with the front pointing your AyrMesh Hubs. This usually takes a few at the nearest AyrMesh Hub. minutes, but may take half an hour.
- Page 4 "LAN" port of the Receiver's power supply. To Receiver For instance, to connect an IP camera to Power the AyrMesh Receiver, just run an Ethernet Supply cable from the camera to the Receiver's LAN port. Ethernet Switch...
Need help?
Do you have a question about the AyrMesh and is the answer not in the manual?
Questions and answers
My receiver, power supply light is not on. I think I need to buy a new power supply.