Safety Instructions, Transport And Installation - Endress+Hauser Analytik Jena APU 28 Series Operating Instructions Manual

APU 28 APU 28 S APU 28 SPE
2.4

Safety instructions, transport and installation

The following has to be observed:
 The sample preparation unit must only be commissioned, operated and serviced by
trained personnel instructed in technical safety.
 The operation or servicing of the sample preparation unit by minors or individuals
under the influence of alcohol, drugs or medication is not permitted.
 It must be ensured that only authorized personnel works with the sample preparation
unit.
 The operating personnel must be familiar with the dangers arising from measuring
liquids. The appropriate protective equipment must be used.
 Prior to pauses or at the end of the work appropriate skin cleaning and protection
measures must be carried out.
 Eating, drinking, smoking or handling open flames is prohibited in the operating room
of the sample preparation unit!
The APU 28 is always installed by the customer service department of Analytik Jena AG or
its authorized and trained specialist personnel.
Unauthorized assembly and installation are not permitted. Incorrect installation can
create serious hazards.
The following has to be observed:
 When placing the device on the laboratory desk consider the movement range of the
arm during operation. Ensure that the whole potential movement range behind the
device is unobstructed.
 Insufficiently secured components pose a risk of injury!
 During transport the components of the equipment must be secured in accordance
with the instructions in the user manual.
 Only transport the sample preparation unit in its original packaging!
Ensure that all transport locks and safety devices have been fitted and that the sample
preparation unit is completely empty.
 To prevent health damage the following must be observed when moving the sample
preparation unit in the laboratory (lifting and carrying):
For safety reasons, two persons are required to transport the sample preparation unit who
must hold the unit by either side of the equipment.
Because the sample preparation unit does not have carrying handles, hold the device
firmly with both hands by its lower end.
The guide values and statutory limits for lifting and carrying loads without auxiliary
equipment must be observed and adhered to.
Safety instructions
13