Chapter 4 Vlan Configuration Commands; Display Vlan Interface; Display Vlan Max-Packet-Process - H3C SecPath Series Command Manual

Command Manual – User Access
H3C SecPath Series Security Products

Chapter 4 VLAN Configuration Commands

4.1.1 display vlan interface

Syntax
display vlan interface interface-type interface-num
View
Any view
Parameter
interface-type interface-num: Specifies the interface. At present, the interface types
supported include Ethernet interface and Gigabit Ethernet interface, and it only
supports sub-interface.
Description
Use the display vlan interface command to view the VLAN configuration information
about a certain interface (only supporting sub-interface).
Example
# Display the VLAN configuration information about the Ethernet sub-interface 2/0/0.1.
<H3C> display vlan interface ethernet 2/0/0.1
encapsulation dot1q vid 60

4.1.2 display vlan max-packet-process

Syntax
display vlan max-packet-process vid
View
Any view
Parameter
vid: VLAN ID, used to identify a VLAN.
Description
Use the display vlan max-packet-process command to view the maximum number of
per-second-processed packets configured on a certain VLAN.
Related command: max-packet-process.
Chapter 4 VLAN Configuration Commands
4-1