E&G Classics Black Ice Mesh Instruction Manual

IMPORTANT: PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE !
Copyright © 2014 by E&G Corporation, LLC. All right reserved. The reproduction or utilization of this work in any form or any electronic, mechanical, or other means, no known or hereafter invented,
including xerography, photocopying, and recording, and in any information storage retrieval system is forbidden without written permission of owners.
2-Piece Upper EZ Overlay Note: Will not fit standard Silverado
Black Ice Mesh Part #: 1022-B10U-14Z / Chrome Mesh Part #1022-010U-14Z
E-Power Chrome Mesh Part #1022-010U-14ZEPC / E-Power Black Mesh Part #1022-010U-14ZEP
TOOLS REQUIRED
E&G is proud to present this package to you and reminds you that for technical information, contact technical assistance
at 410-381-4900. Do not attempt the installation of any E&G product without first reading the detailed instructions.
E&G Classics will not warrant damaged parts or the vehicle due to altered installation procedures.
Important: If the front of the vehicle you are working on differs from the one shown in this instruction
manual, please call technical assistance at 410-381-4900 before proceeding.
E&G Corporation, LLC. warrants its chrome parts and products to be free from defects in material, workmanship or finish for Thirty-Six (36) months from the date of shipment by E&G. This
warranty is limited to the repair or replacement, at E&G Classics option, of the defective part or product.Full E&G Classics warranty information is available online @ www.egclassics.com. Just
click on the product warranty icon.
Please contact the authorized E&G Classics Dealer where you purchased our product from in regards to any workmanship or warranty claims. All items returned to E&G Classics
must have a return authorization number issued by us for inspection or a defective product and or warranty issue. All merchandise sent back to E&G Classics without proper
paperwork or authorization will be rejected and returned.
1. Thread the supplied #4 x 3/4" screws into a piece of cardboard
and apply flat or semi-gloss black paint and allow to dry.
3
3. Use a plastic squeegee to push through the double faced tape
securing the "Z71" emblem to the factory grille and remove the
emblem. Do not use a metal tool such as a screwdriver or you
will damage the emblem.
Copyright 2014 by E&G Corporation, LLC.
2014-15 Chevrolet Silverado 1500 Z71
Mesh & E-Power Mesh Grilles
Automotive grade masking tape, razor blade or X-Acto knife, 9mm socket and ratchet, electric drill, 1/16"
drill bit, #1 phillips screwdriver, plastic squeegee, mild solvent, glass cleaner and soft, clean cloths.
Notes to the Technician/Installer:
E&G Classics Warranty Information:
For E&G Classic Product Returns:
2. Apply masking tape to the chromed portion of the factory grille
as shown. This will protect the chrome finish during the E&G
mesh grille installation.
4
4. Remove the factory double faced tape from the back of the em-
blem along with the alignment pin behind of the number "1"
Visit us online today at www.egclassics.com
10/22/2014
2
2