Troubleshooting; Customer Support - POLLOGEN TriPollar Stop VX User Manual

TROUBLESHOOTING

If your TriPollar Stop VX device is not working, take the following steps
®
before contacting the service center:
• Ensure that you have removed the device's protective cover.
• Make sure that the electric cord is securely connected to the device and
the Power supply adapter is firmly connected.
• Press the Power button and verify that the green indicator light illuminates.
• Ensure that you applied TriPollar
described in this manual. The Tripollar
properly when the preparation gel is not applied.

CUSTOMER SUPPORT

For service, refer to the store where you purchased the TriPollar
visit our website at: www.pollogen.com. When contacting a local service center,
have the device serial number ready. The serial number is located on the top panel
of the device. Customer satisfaction is our top priority. To help us provide you with
the best support possible, please send us your comments and suggestions. Contact
information is provided on the back cover of this manual, or you can contact us via
our website (see above).
Preparation Gel according to instructions
®
Stop VX device does not work
®
20
Stop VX device or
®