Advertisement
Table of Contents
MOBILE RADIATION APRON WALL RACK
Tools required.
·
Phillips Screwdriver
-
Two people assembly required
·
3/16" Allen Wrench
·
3/8" socket or adjustable wrench
Instructions
Description
Step
L oosen all screws to ensure no obstructions are
1
within are within the cavities.
2
Place the base on a level floor with casters wheels
toward you and smooth beam facing outwards.
3
Place the plate onto the base and hand tighten
with bolts. Repeat process on the other remaining
base and plate.
3a
When installing the plate only work on the
bottom row, the outside holes. Leaving the
middle hole open
4
Place vertical support on top of the base. Hand
tighten all two additional bolts. This leaves the
middle hole empty. Repeat process on the other
remaining plate assembly and vertical support.
RAR-MAR36
Instructions
Picture
Advertisement
Table of Contents
Related Manuals for Philips RAR-MAR36
Summary of Contents for Philips RAR-MAR36
- Page 1 MOBILE RADIATION APRON WALL RACK RAR-MAR36 Instructions Tools required. · Phillips Screwdriver Two people assembly required · 3/16” Allen Wrench · 3/8” socket or adjustable wrench Instructions Description Step Picture L oosen all screws to ensure no obstructions are within are within the cavities.
- Page 2 MOBILE RADIATION APRON WALL RACK RAR-MAR36 Instructions Attach the lower cross beam to the assembly. Use 1 bolt and 1 washer to fasten one cross beam to the assembly. The location of the cross beam is in between the two bolts already in the base.
Need help?
Do you have a question about the RAR-MAR36 and is the answer not in the manual?
Questions and answers