Kurgo back seat BARRIER Installation/Care

PARTS LIST & KEY
A elastic strap
with D-ring
B outer D-ring
C under seat hook
D top headrest strap
E top tension buckle
F under seat strap
G backseat divider
H backseat divider ring
I divider snaps
J backseat divider cord
K barrier extension
L metal bar slot
M extension zipper
N extension strap
O extension D-ring (small)
P extension buckle
Q under seat connector strap
R backseat divider strap
View from backseat
Attaching the barrier
Detachable Headrests
Orient the barrier so the
Kurgo logo is facing the
back of the car. Remove the
driver's seat headrest. Slide
the inner headrest column
through the large D-ring
attached to elastic strap
(A). Slide outer D-ring (B)
through outer headrest post.
Repeat on passenger side.
For more information: 877.847.3868
5.09
Installation & care
OPTION A - Clip hook (C) to
the underside of the front
seat base plate or springs.
::
Center Console
For an online video demonstration of how to
install the Backseat Barrier visit us at:
www.kurgo.com/support/instruction.html
OR
OPTION B - Run strap (F)
around the outside footing
of each seat and secure
hook (C) by
them to either
included connector strap (Q).
www.kurgo.com :: info@kurgo.com
INSTALLED VIEW
Passenger Seat
Pull top straps (D) tight on
both sides; pull both bottom
straps (F) tight.
connecting
end of