4. Adhere the coin-cell battery to the inner frame.
Next steps
1. Install the
WLAN
card.
2. Install the
WWAN
card.
3. Install the
2280 SATA
SSD.
4. Install the battery.
5. Install the
base
cover.
6. Follow the procedure in
Hard disk drive
Removing the Hard drive
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
About this task
The figure indicates the location of the HDD and provides a visual representation of the removal procedure.
Steps
1. Locate the HDD on your computer.
2. Disconnect the HDD cable from the system board.
3. Remove the four (M2x2.7) screws that secure the HDD to the system board.
4. Remove the HDD from the computer.
After working inside your
computer.
Before working inside your
computer.
Disassembly and reassembly
29
Need help?
Do you have a question about the Latitude 5411 and is the answer not in the manual?
Questions and answers