Ozobot Bit Getting Started

Ozo
Blockly
Getting Started
To program:
• Go to ozoblockly.com on your
computer or tablet.
• In the OzoBlockly Editor, choose a
mode and start to drag and drop
blocks.
• Load your program onto Ozobot.
(See instructions below)
To get help:
reference guide in the right pane of
the OzoBlockly editor.
• See calibration and loading help by
pressing the "Help" button in the
lower left of the opened load tab.
To load and run:
1
Press "Load Ozobot" and the load tab will
come up from the bottom of the screen
3
You will need:
Tablet or Computer
Click "Help" button in editor for complete instructions
Load Ozobot
Load
Load program
to Ozobot.
Ozobot Bit
To learn and play:
• Play the OzoBlockly games
(games.ozoblockly.com)
• Check out the examples and
challenges in the right pane of the
OzoBlockly editor.
• Go to Ozobot's STREAM education
website (ozobot.com/learnzone) to
download lessons, activities and
other instructional materials.
To share:
• In the OzoBlockly editor, save your
program using the save icon at the
then share with friends.
• Share with us by sending your
program to OzoEDU@ozobot.com
2
4
Note: If you are using a printed or drawn map, be sure to
calibrate Ozobot on the paper before running program.
X
Calibrate Ozobot
to the screen
Run program by double
pressing Ozobot's
on/off button.