Furuno GP-39 Manual
  1. Manuals
  2. Brands
  3. Furuno Manuals
  4. GPS
  5. GP-39
  6. Manual

Furuno GP-39 Manual

Using as an scx-21 (nmea0183) display and setting device
Hide thumbs Also See for GP-39:
1
2
3
4
5

Advertisement

Table of Contents

Using the GP39 as an SCX-21
(NMEA0183) Display and Setting

1. Navigation Display for SCX-21

2. Setting Menus for SCX-21
3. Interconnection and Settings
3.1. Interconnection
3.2. Setting – Operation Mode
3.3. Update Guidance
GP-39
Mod el:
Device
INDEX
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GP-39 and is the answer not in the manual?

Questions and answers

Related Manuals for Furuno GP-39

Summary of Contents for Furuno GP-39

  • Page 1 GP-39 Mod el: Using the GP39 as an SCX-21 (NMEA0183) Display and Setting Device INDEX 1. Navigation Display for SCX-21 2. Setting Menus for SCX-21 3. Interconnection and Settings 3.1. Interconnection 3.2. Setting – Operation Mode 3.3. Update Guidance...
  • Page 2 1. Navigation Displays for SCX-21 The following display pages are added to the GP-39 with v3.01 software and above to show data from an SCX-21. Display Example...
  • Page 3 2. Setting Menus for SCX-21 In addition to the conventional GP-39 settings, the following items are added.  Prohibited GNSS satellite (QZSS, GPS, GLONASS, Galileo)  Offset (Heading, Pitch, Roll, SOG/3-Axis SPD, Air Pressure, Air Temperature)  Smoothing (SOG/COG, 3-Axis Speed, ROT) ...
  • Page 4 39, the original antenna GPA-017 or GPA-C01 CANNOT be used. (2) In the configuration of an SCX-21 with a GP-39, the GP-39 NMEA0183 output port is occupied by the SCX-21. In order to output/input data from/to the SCX-21, utilize Data 2 and Data 3 ports of SCX-21.
  • Page 5 GP-39 will restart. 3.3. Update Guidance For a GP-39 with v02.01 or earlier, update to v03.01 or higher to connect to the SCX- If the GP-39 is already loaded with v3.01 or higher, change the operation mode to [SCX-21] to use the GP39 with the SCX-21.

Table of Contents