Advertisement

Quick Links

Gumdrop Kitchen / Sea Salt Kitchen
L4008 / L4009
Assembly Difficulty
two-person job
easy -
medium
- hard
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone's
favourite way to spend their time, so we've tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you'll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.flatpackconstruction.co.uk.
A few important pointers before you start:
Please read the instructions right through before you start, and check
that all the components have been included in the pack; we find
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
Make sure you have the right tools. Allen keys are provided if required,
but screw drivers and other tools are not. You'll find details of the tools
you need at the beginning of the instructions.
It's a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it's been assembled.
Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
V2
10/02/2017
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Gumdrop Kitchen and is the answer not in the manual?

Questions and answers

Summary of Contents for Great Little Trading Gumdrop Kitchen

  • Page 1 Hopefully our efforts will have been worthwhile and you’ll sail Gumdrop Kitchen / Sea Salt Kitchen through the whole process. But if it all feels a bit too much L4008 / L4009...
  • Page 2: Safety Warnings

    Safety Warnings: Customer Service: • Adult assembly required. • If you find that any components are missing or damaged, please do not begin assembly and do not use the item. Please contact GLTC • Unassembled product contains small parts which may present a Customer Services on 0344 848 6000 immediately.
  • Page 3: Component Checklist

    Component Check List You will need (not supplied) Phillips Head 1x Anti-Tip Strap Screwdriver 16x Short 10x Medium 32x Long 4x Door 4x Door Screws Screws Screws Catches Catches 8mmL 16mmL 21mmL 40x Barrel Nut 1x Anti-Tip Strap Bolts 1x Spout Screw Screw 40x Barrel Nuts 29mmL...
  • Page 4: Drawer Assembly

    Drawer Assembly Soap Drawer Assembly STEP 3: Attach panel H to panels F and G using 4x screws (#4). Now slide the base panel (I) into the grooves. Hardware for Step 1: Hardware for Step 3: 4x #6 barrel nuts STEP 1: Attach panels C and B to panel D using 4x barrel nuts and 4x #4 16mmL screws...
  • Page 5 Dishwasher Door Assembly Hardware for Step 5: Soap Drawer Assembly Hardware for Step 7: 2x #5 21mmL screws 4x #4 16mmL screws 2x #3 8mmL screws 1x #2 door catch STEP 5: STEP 7: Push the part assembled drawer through the hole. Now slot the soap drawer Attach the handle (R) to the door (O) using 2x screws (#5).
  • Page 6 Hardware for Step 9: Fridge Door Assembly Hardware for Step 11: 2x #5 21mmL screws 2x #5 21mmL screws 2x #3 8mmL screws 2x #3 8mmL screws 1x #2 door catch 1x #1 door catch STEP 9: STEP 11: Attach the handle (R) to the door (Q) using 2x screws (#5). Attach the Attach the door catch (#1) to panel T using 2x screws (#3).
  • Page 7 Hardware for Step 13: Hardware for Step 15: 2x #3 8mmL screws 2x #5 21mmL screws 1x #8 29mmL screw 1x #1 door catch #5 #5 STEP 15: STEP 13: Attach the spout (Z2) to the taps (Z1) using 1x screw (#8). Attach the door catch (#1) to the top face of panel V using 2x screws (#3).
  • Page 8 Hardware for Step 17: 4x #6 barrel nuts 4x #7 barrel nut bolts STEP 17: Lie the assembly on its back (as shown). Attach shelf panel (AC) to side panel (AB) STEP 19: using 2x barrel nuts and screws. Then carefully raise the assembly upright and secure Slot the microwave control panel (AE) into the dowel holes on the shelf (AC).
  • Page 9 start with this barrel Hardware for Step 21: Hardware for Step 23: nut screw first 3x #6 barrel nuts 2x #6 barrel nuts 3x #7 barrel nut bolts 2x #7 barrel nut bolts STEP 21: Now attach microwave top panel (V) using 3x barrel nuts and screws.
  • Page 10 Hardware for Step 25: Hardware for Step 27: secure top set of barrel nuts / screws first 2x #6 barrel nuts 4x #6 barrel nuts 2x #7 barrel nut bolts 4x #7 barrel nut bolts The help of a second person may make this step easier.
  • Page 11 STEP 29: STEP 31: Slot the oven tray (AI) into the two Position panel AJ into the slots located on the inside faces of dowel holes on panels T and U. panels T and S. STEP 30: Hardware for Step 32: Firstly locate the lower oven door hinge on panel P into 2x #5 21mmL screws...
  • Page 12 Hardware for Step 33: Hardware for Step 35: 5x #5 21mmL screws 4x #6 barrel nuts STEP 35: 4x #7 barrel nut bolts Carefully lower worktop panel (AA) onto the base assembly. Ensure the dishwasher door hinge slots into the hinge hole STEP 33: under the worktop.
  • Page 13 STEP 38: Hardware for Step 36: Slot the fridge shelf (A0) into the two slots located on the inside faces 2x #6 barrel nuts of panels X and U. 2x #7 barrel nut bolts View of panel U from the other side insert dowels into holes STEP 36:...
  • Page 14 STEP 41: Hardware for Step 40: Hardware for Step 41: Now secure the top assembly to the base assembly. To do this firstly you will need to carefully line up the 4x #6 barrel nuts 3x #6 barrel nuts back edge of the backboard to the back edge of the cut out (as shown below).
  • Page 15 STEP 45: The assembly is now complete. STEP 43: Slide the assembled drawer along the runners Copyright© 2016 G.L.T.C. Ltd. All rights reserved. Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.

This manual is also suitable for:

Sea salt kitchenL4008L4009

Table of Contents