Information Concerning The Modular System And Optional Accessories; General - Philips PM 5125 Manual

as
INFORMATION ON THE MODULAR SYSTEM AND OPTIONAL ACCESSORIES
A. General
The modular LF-system consists of various units which can be used individually or
combined. The application possibilities can be extended by combining units.
The width of the various units is expressed in modules, one module having the
following dimensions:
width: 70 mm
height:
178 mm
depth: 250 mm
The units have a width of one, two or three modules. They can be linked to a
maximum width of six modules.
The instruments are suitable for rack-mounting.
The following units are available.
PM 5125 -- Generator
Freyuency range
Attenuator
Output voltage
Wave forms
Width
Suitable for use with:
Power amplifier
Wide -band transformer
PM 5160 -Oscillator
Freyuency range
Output voltage
Waveforms
Attenuator
Width
Suitable for use with:
Wide-band amplifier
Power amplifier
Monitored attenuator
PM 5162 - LF Sweep oscillator
Frequency range
Waveforms
l0 Hz ... ]MHz
0-60 dB (three steps)
10 Vrms into 600 S2
- sine wave
- square wave
3 modules
PM 5175 (width: 2 modules)
PM 5181 (width: l module)
1 Hz ... 1 MHz
2 Vpp into 600 S2
- sine wave
- square wave (from /04 version)
continuous (logarithmic)
2 modules
YM 5170 (width: 1 module)
PM 5175 (width: 2 modules)
PM 5180 (width: 2 modules)
0.1 Hz ... 100 kHz
- triangle wave
- square wave
sine wave