Calibration - LEPSI WATCH SCOPE User Manual

CALIBRATION

Watch Analyzer is connected to atomic clocks in order to test and calibrate
its time base. This way, the Watch Analyzer guarantees exceptional mea-
surement quality up to the highest standards of professional horologists.
To do this, simply connect your mobile device to the internet and begin
the calibration by clicking Start .
1 - Design (iOs)
Choose your favorite background color.
2 - Watchmaker mode
Standard: The rate variation only is shown.
Watchmaker: All the function of the
watch (rate variation, beat error,
amplitude, frequency) are shown
3 - Continuous Analysis
Analysis does not stop, useful for checking
rate performance over a long period.
4 - Cloud backup
Save your data on our cloud
when changing device.
5 - Choose logo pdf
Choose the logo of the watch
report to personnalize it.
6 - Calibrating your mobile device
To obtain a precise measurement, calibrating
your Watch Scope is IMPERATIVE. Connect
to the internet, start the calibration and wait
30 minutes or 3 hours (select your calibration
mode). You only need to do this for first time
use or if you ever reinstall the system.
9