Machine Washing And Cleaning; Disposal Of Packaging And The Machine At The End Of Its Service Life; How To Order Spare Parts; Manufacturer's Contact Information - Vari RAPTOR Hydro Instructions For Use Manual

3.5.10.2.1 Machine Washing and Cleaning

When washing and cleaning the machine, proceed so as to observe valid provisions and laws regarding protection of water courses and
other water resources against pollution or contamination by chemical agents.

Never wash the engine by a water jet! During starting, the engine electric system could malfunction.

You can use the pressure washer to wash the other parts of the machine.

After washing, always dry the machine and lubricate, if needed, moving parts in accordance with instructions in Chapter
3.5.3 Machine Lubrication.

3.5.10.3 Disposal of Packaging and the Machine at the End of its Service Life


When you unpack the machine you are bound to dispose of the packaging material according to national laws and
decrees concerning waste disposal.
When disposing of the machine at the end of its service life, we recommend proceeding as follows:
1) Demount from your machine all the parts that may still be used.
2) Drain oil from the engine into a suitable closing container and dispose it in a waste collection centre
3) Remove the plastic and non-ferrous metal parts.
4) The remaining machine and its removed demounted parts are to be disposed of according to national laws and decrees
concerning waste disposal.

3.5.10.4 How to Order Spare Parts

These Operating Instruction do not include the list of spare parts.
For correct identification of your machine, you have to know the type designation (Typ), serial identification number (№) and order
number (C№) stated on the machine nameplate, box, or in the warranty card. Only with this information it is possible to search correctly for
the designation of the respective spare part with your seller.
To search spare parts in the electronic catalogue of spare parts at http://katalognd.vari.cz, the first 10 characters of the identification
number № are sufficient. If you do not have Internet access, you can ask for the printed catalogue to be sent C.O.D.
Table 42: Nameplate - example

3.6 Manufacturer's Contact Information

VARI,a.s. Phone: (+420) 325 607 111
Opolanská 350 E-mail:
289 07 Libice nad Cidlinou
The Czech Republic

3.7 Attached illustrations

The attached illustrations are common for all language versions. They can be found at the end of this manual in Chapter 6 on page 91.
High-resolution colour pictures are included in the electronic version of these operating instructions, which available for download from our
web pages.
77 The respective local authority will inform you of the disposal centre location.
54
vari@vari.cz
Web: http://www.vari.cz
Field Description
Device type designation:
Typ
RAPTOR Hydro
Unique serial identification number:
№
1005901133.0118.00001
Business (order) number:
C№
4470
http://www.vari.cz
RAPTOR Hydro
77 .
(product.season.sequence)
http://katalognd.vari.cz