Troubleshooting - Husqvarna 340i Operator's Manual

7. Turn the guide bar daily to extend its life cycle.
User interface
LED screen Possible faults
The warning Chain brake is
indicator flash- engaged.
es.
Temperature
deviation.
Overload. The
saw chain can
not move.
The power trig-
ger and the
start/stop but-
ton are pushed
at the same
time.
Green activate Low battery
LED flashing. voltage.
The warning Service.
indicator is on.
Battery
Problem
Green LED flashes.
Red error LED flashes.
Red error LED comes on.
1155 - 005 - 29.06.2020

Troubleshooting

Possible solution
Disengage the chain brake.
Let the product to cool down.
Release the saw chain.
Release the power trigger to activate the product.
Charge the battery.
Speak to your servicing dealer.
Possible faults
Low battery voltage.
The battery is empty.
Temperature deviation.
Overvoltage.
Cell difference is to much (1V).
Possible solution
Charge the battery.
Charge the battery.
Use the battery in temperatures between
-10°C (14°F) and 40°C (104°F).
Remove the battery from the battery charg-
er.
Speak to your servicing dealer.
33