Advertisement

Hills Hoist
8-Line,
7-Line,
& 6-Line
Product Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Hoist 8-Line and is the answer not in the manual?

Questions and answers

Summary of Contents for Hills Hoist 8-Line

  • Page 1 Hills Hoist 8-Line, 7-Line, & 6-Line Product Manual...
  • Page 2: Carton Contents

    • Do not use for any purpose other than to clearance around your Hills Hoist (Fig. 1). hang and dry washing. • Do not use your Hills Hoist if parts are worn or damaged. • Fold up your Hills Hoist in the event of extreme winds to avoid any product damage.
  • Page 3: Installation

    Installation Step 2 – Install the Ground Socket 2.1 Dig a hole 250mm (10") diameter by Fig. 2 approximately 650mm (26") deep (Fig. 2). 2.2 Place approximately 200mm (8") of coarse gravel into the hole. 2.3 Insert the main standard into the ground socket.
  • Page 4 Installation Step 3 – Assemble the Hoist 3.4 Check the head assembly is locked in position by lifting upwards (it should not 3.1 Place the main standard in the ground move). If the head assembly is not engaged, socket. repeat Step 3.3. 3.2 Place the bottom of the head assembly into Note: There is a small amount of rotational the top of the main standard and lower it...
  • Page 6: Operation

    1. Unlock the locking collar by rotating 2. Lower the arm and cross assembly until anti-clockwise. closed. 2. Lift the Hills Hoist from the ground 4.4 Wrap the line retainer around the hoist to socket and store in a suitable place. prevent lines from becoming tangled.
  • Page 7 (Fig. 7). Step 2 Note: A video describing this operation can be viewed on the Hills website at hillshome.com.au Pull line out of arm Fig. 7 Step 3...
  • Page 8 Line Tensioning Step 5 (continued) Step 5 Step 6 Starting at the furthest arm from the tensioning arm, pull Keeping the tension on the line, feed it back through the the line tight and move from arm to arm to generate tensioner.
  • Page 9: Handy Hints

    Handy Hints Hills handy hints Care and maintenance One of the benefits of a Hills Hoist is that it It is a good idea to occasionally inspect all spins naturally in the breeze, allowing the sun components and check for wear and tear or to shine on all your clothes and speed up the damage.
  • Page 11: Contact Details

    Customer Service Centre during their local business hours: Australia 1300 300 564 New Zealand 0800 021 027 Email hhl.enquiries@amesau.com Hills Websites hillshome.com.au Hills Home Living hillshome.com.au/need-help/ Hills Consumer Advice...
  • Page 12 Cyclone Tools Pty Ltd A.B.N. 89 169 427 061 Issue April 2017 HD10700d...

This manual is also suitable for:

Hoist 7-lineHoist 6-line

Table of Contents