This document describes how to configure the Vega 50 8 FXS + 2 FXO SIP gateway unit using the
web browser interface. The configuration described here will allow the Vega to be rapidly
installed and tested.
The instructions below will configure the Vega 50 8 FXS + 2 FXO to operate as follows:
• Calls made by any of the attached analogue phones will be routed to the SIP
proxy; the Vega will pass on any dialled digits in the number part of the request
URI
• Calls received from the PBX (on the FXO ports) will be routed to the SIP Proxy with
the numeric telephone number part of the request URI containing the DN (directory
number) for the port on which the call was received.
• Calls received from the SIP proxy with a leading 9 in the dialled number will be
routed out of the first FXO port
06
06
55501 55502
55501 55502
55501 55502
POTS Telephones
POTS Telephones
Version 0.6
For use with Vega 50 8 FXS + 2 FXO – SIP version 09.02.05.2 T003 or greater.
sp
sp
SIP Proxy
SIP Proxy
Vega 50
Vega 50
99
99
8 FXS + 2 FXO
8 FXS + 2 FXO
07
07
13
13
56
56
57
57
...
... ...
55508
55508
55508
Initial configuration
Vega 50
(SIP)
– R5.2
LAN
LAN
pstn
pstn
pstn
26 August 2004
8 FXS + 2 FXO
pstn
pstn
© 2004 VegaStream Ltd.
Page 1 of 52
Need help?
Do you have a question about the Vega 50 8 FXS + 2 FXO and is the answer not in the manual?
Questions and answers