Panasonic MX-AC400 Operating Instructions Manual page 12

How to use Plastic Jar with Filter unit
1. Fix the Filter gasket.
Pasang gasket Filter.
Fix the Filter Gasket at the bottom of the Filter.
Pasang Gasket Filter di bagian bawah Filter.
2. Put the Filter in the Plastic Jar.
Letakkan Filter di dalam
Mangkuk Plastik.
Please ensure, the rib of the Filter is
placed properly on the Plastic Jar Flow
Breaker lines.
Pastikan, bingkai filter diletakkan
dengan benar pada garis Pemutus
Aliran Mangkuk Plastik.
3. Put ingredients.
Masukkan bahan.
Cut the ingredients into small enough pieces to fit in to the
feeder hole with proper water capacity.
Make sure the buttons are not pressed down on the Motor
Housing.
Potong bahan menjadi potongan yang cukup kecil sehingga
bisa dimasukkan ke lubang pengisian beserta air secukupnya.
Pastikan tombol tidak ditekan pada Rumah Motor.
4. Put the Lid-J on the Plastic Jar first.
Pasang Tutup-J pada Mangkuk Plastik terlebih dahulu.
Set the hook of Lid-J onto the Plastic Jar. Make sure the Lid Cover is
closed over the Lid-J.
Pasang pengait Tutup-J pada Mangkuk Plastik. Pastikan Kover Tutup
ditutup di atas Tutup-J.
12
These Grooves are located at the top
of Plastic Jar Flow Breaker Lines.
Alur-alur ini terletak di bagian atas
Garis Pemutus Aliran Mangkuk Plastik.
Turn the Lid Cover until it stops.
Putar Kover Tutup sampai mentok.
These Grooves are located at the
bottom of Plastic Jar Flow Breaker
Lines.
Alur-alur ini terletak di bagian bawah
Garis Aliran Mangkuk Plastik.
Plastic Jar Flow Breaker Lines
Garis Pemutus Aliran Mangkuk Plastik