Related Manuals for Logitech LIGHTSPEED G703
Summary of Contents for Logitech LIGHTSPEED G703
- Page 1 G703 LIGHTSPEED Wireless Gaming Mouse Souris gaming sans fil LIGHTSPEED SETUP GUIDE GUIDE D’INSTALLATION...
- Page 2 SETUP INSTRUCTIONS A wireless receiver, USB adapter, and optional 10g weight can be found in the packaging Plug one end of the cable into your PC, and the other end into the USB adapter and receiver – The receiver can also be used plugged directly into your PC However, using the cable and adapter when in wireless mode is recommended and allows for better connectivity and easy access to the cable for recharging...
- Page 3 To charge, disconnect the cable from the adapter and plug into the front of the mouse Your mouse will operate in data‑over‑cable mode whenever it is plugged in directly to a PC Full charge from empty requires approximately two hours plugged in to a PC USB port Tips: –...
- Page 4 MOUSE FEATURES Left (Button 1) Right (Button 2) Wheel click (Button 3) Back (Button 4) Forward (Button 5) DPI Cycle On/Off switch (bottom of mouse, not programmable) Weight door 5 ENGLISH...
- Page 5 24 hours non‑stop gaming at 1ms report rate with RGB color cycling on * – Charge level can be checked when the mouse is powered on or using Logitech Gaming Software to assign a button to check charge level – Charge level is displayed for seven seconds at mouse power‑on using the color of the scroll wheel...
- Page 6 RGB PROGRAMMABLE LIGHTING G703 wheel and logo is illuminated with RGB LEDs These colors can be customized using Logitech Gaming Software to a variety of breathing, color cycling, or solid color modes Lighting patterns can also be synchronized with other supported...
- Page 7 LOGITECH GAMING SOFTWARE You can customize the 3 onboard profiles of the G703 using the Logitech Gaming Software These settings include surface tuning, button programming, lighting color, lighting effects, report rate, and tracking behavior G703 allows up to 5 DPI...
Need help?
Do you have a question about the LIGHTSPEED G703 and is the answer not in the manual?
Questions and answers