Sony UTX-B1 Quick Start Manual

Parts Identification Parts Identification
WIRELESS LAPEL MICROPHONES
Body-pack transmitter Body-pack transmitter
(UTX-B1) (UTX-B1)
1 antenna
1 Antenna 1 Antenna
2 lapel mic input connector
2 Audio input connector 2 Audio input connector
Connect the supplied lavalier Connect the supplied lavalier
3 power indicator
microphone here. microphone here.
4 display section
3 Power indicator 3 Power indicator
5
+ (+ selection) / – (– selection/ reset)
Lights up red when the transmitter is Lights up red when the transmitter is
buttons Press these buttons to set the
tuned on. tuned on.
transmission channel, frequency, or
attenuation level of the input signal. The "–"
4 Display section 4 Display section
button resets the accumulated battery use time
to "00:00".
6 battery compartment
A A B B
AF AF RF RF
7 SET button - press to change and
enter display parameters
8 power switch
The E channel indication for The E channel indication for
U66 model is shown. U66 model is shown.
Parts Identification
Body-pack transmitter
(UTX-B1)
1 Antenna
2 Audio input connector
Connect the supplied lavalier
microphone here.
3 Power indicator
Lights up red when the transmitter is
tuned on.
4 Display section
A B C D
AF RF BATT
H
L
C C D D
BATT BATT
CH
H H
E
L L
The E channel indication for
U66 model is shown.
CH CH
E E
microphone here.
3 Power indicator
Lights up red when the transmitter is
tuned on.
4 Display section
A
AF
A AF (audio frequency) indication A AF (audio frequency) indication
Appears whenever the input audio Appears whenever the input audio
signal is stronger than the reference signal is stronger than the reference
The E channel indication for
level. level.
U66 model is shown.
B RF (antenna output) indication B RF (antenna output) indication
A AF (audio frequency) indication
Appears whenever the input audio
Appears during signal transmission Appears during signal transmission
signal is stronger than the reference
from the antenna. from the antenna.
level.
C RF (antenna output) level C RF (antenna output) level
B RF (antenna output) indication
Appears during signal transmission
indication indication
from the antenna.
Shows the RF output level setting. Shows the RF output level setting.
For details, see "Setting the RF output For details, see "Setting the RF output
C RF (antenna output) level
indication
level" on page 42. level" on page 42.
Shows the RF output level setting.
For details, see "Setting the RF output
D BATT (battery) indication D BATT (battery) indication
level" on page 42.
Shows the battery condition. Shows the battery condition.
D BATT (battery) indication
For details, see "Power Supply" on For details, see "Power Supply" on
Shows the battery condition.
page 30. page 30.
For details, see "Power Supply" on
page 30.
E CH (channel) indication E CH (channel) indication
E CH (channel) indication
Shows the transmission channel. Each Shows the transmission channel. Each
Shows the transmission channel. Each
time you press the SET button in time you press the SET button in
time you press the SET button in
transmission mode, the channel transmission mode, the channel
transmission mode, the channel
indication changes as follows. indication changes as follows.
indication changes as follows.
For details, see "Settings" on page
For details, see "Settings" on page For details, see "Settings" on page
38.
38. 38.
Transmission
channel
Transmission Transmission
channel channel
Transmission
frequency
Transmission Transmission
Attenuation
frequency frequency
level of the
input signal
Attenuation Attenuation
Accumulated
battery use
level of the level of the
time
input signal input signal
The channel/frequency indications for
Accumulated Accumulated
U66 model are shown.
battery use battery use
time time
The channel/frequency indications for The channel/frequency indications for
U66 model are shown. U66 model are shown.
C D
B
RF BATT
H
L
CH
E
Press
the
SET
Press Press
button.
the the
SET SET
button. button.
23
23 23
Transmission
channel
Transmission
frequency
Attenuation
level of the
input signal
Accumulated
battery use
time
The channel/frequency
U66 model are shown.