Page 1
ELAD ASA-16 Antenna splitter amplifier Use. The ASA16 Splitter Amplifier has been designed to split the signal received from an antenna to up to six different receivers at the same time. Thanks to the inside divider and ultra-wideband low noise amplifiers, the antenna signal can be shared with the receivers connected to the six outputs.
Page 2
Power supply. To power on the device simply connect a 12V DC – 300 mA power supply with the power connector on the rear panel of the ASA-16. The power status is indicated by the ON Led on the front panel.
Need help?
Do you have a question about the ASA-16 and is the answer not in the manual?
Questions and answers