Table of Contents
Advertisement
Quick Links
NB1601 Overview
1
Status LED
2
Reset
3
USB
4
Ethernet
5
LTE
6
Bluetooth LE
www.netmodule.com
Status indicator.
- Blinking: Device busy; device is in startup,
software- or configuration update.
- On: The device is ready
Press at least 3 seconds for reboot and at least 10
second for a factory reset. The start of the factory
reset is confirmed by all LEDs lighting up for a
second. The button must be released immediately
afterwards.
USB 2.0 host port
Connect your router by using the ETH 1 port with
your computer to start the configuration. Your
router is configured as a DHCP server by default
and has the IP address 192.168.1.1. Open this IP in
your browser to reach the WEB-GUI.
SMA female connectors for LTE antennas. For MOB
1, A1 is the main, A2 the auxiliary port.
SMA female connector (A3) for Bluetooth.
9/11/2018 © NetModule AG | Errors reserved
Advertisement
Table of Contents
Related Manuals for NetModule NB1601
Summary of Contents for NetModule NB1601
- Page 1 IP address 192.168.1.1. Open this IP in your browser to reach the WEB-GUI. SMA female connectors for LTE antennas. For MOB 1, A1 is the main, A2 the auxiliary port. Bluetooth LE SMA female connector (A3) for Bluetooth. www.netmodule.com 9/11/2018 © NetModule AG | Errors reserved...
- Page 2 Then insert the SIM cards with the chip facing to the back. SIM 2 Close the holder again and shift it back until it’s locked. Please close the SIM cover after inserting the SIM card and tighten the screw again. www.netmodule.com 9/11/2018 © NetModule AG | Errors reserved...
Need help?
Do you have a question about the NB1601 and is the answer not in the manual?
Questions and answers