COX Homelife HD Camera Installation Instructions

With the HD Camera from Homelife, you can now view live video of your home
remotely as well as record brief video clips from anywhere, anytime.
Expected Installation Time: 20 minutes
IMPORTANT: You will need to access your Homelife Security Router and Touchscreen Control Panel
to complete installation. You may connect up to a maximum of 6 cameras to your Homelife system.
1

Watch Installation Video

Before you begin, watch the HD Camera installation video at
cox.com/diyhomelife on your mobile device, tablet or
2

Connect Camera to Router

Before you begin, you will need your Camera, Homelife Security Router, Pairing Y Cable, Ethernet Cable and Power
Cord. Please note that if you have ordered more than one camera, you may only pair one camera at a time.
1. Attach the camera to the camera mount.
2. Connect the camera to the Homelife Router utilizing the white Y Pairing Cable,
Ethernet Cable, and Power Cord as shown above.
3. Plug the Power Cord into a nearby power outlet.
Expected Result: Two green lights will appear on the front of the camera, indicating it is ready to
pair with the Touchscreen.
3

Configure the Touchscreen

In this step, you will need to access your Touchscreen Control Panel and have your 4-digit Master Keypad Code ready.
1. On your Touchscreen Control Panel, press the Settings
code, then select Home Devices > Cameras > Add a Camera.
2. Follow the prompts to conduct a network test.
Expected result: A green check mark will appear with the upload speed, which is used to set the default
video quality for the camera.
3. Press Next. The Hardware Setup screen appears. Press Next to continue.
4. On the Locating Camera screen, the connected camera will appear. Press Accept to begin the pairing
process. If necessary, the firmware will begin to update automatically, and camera configuration will
begin. When complete, press Next.
Indoor Installation Instructions
computer.
app and enter your 4-digit master keypad
HD Camera
START HERE
cox.com/diyhomelife
INSTALLATION TIP
Make sure you have an available
power outlet near your Homelife
Security Router before you get
started.
Continued on next page...