Assembly - Bissell CLEANVIEW SWIVEL PET REWIND 2254 Series User Manual

Assembly

The only tool you will need to assemble your vacuum is a
Phillips-head screwdriver.
1
Place the Handle onto the
base and push it down.
Then attach the handle
with the 2 screws taped to
the handle in a plastic bag.
3
Insert the Stretch Hose end into the
back of the vacuum and twist right to
lock in place.
5 Now, put your accessory tools on the vacuum and you're ready to go!
Dusting Brush
NOTE: The Powerfoot will not suction properly unless the Stretch Hose is firmly attached.
Pet Hair Corner Tool
2
Insert the Extension Wand Base and
turn it to the right to lock in place.
4
TurboEraser® Tool
Wrap Stretch Hose
up and around the
hose wrap on the
handle. Slide end of
hose into vacuum
base.
Extension Wand
(Crevice Tool stores inside)
www.BISSELL.com
5