Charging The Battery; Remote Control - JVC RV-N120BA User Manual

Charging the Battery

This portable speaker uses a built-in rechargeable battery. When battery is
low, the battery icon on the LED Display keeps flashing. Charge it as soon as
possible.
To charge, connect the microUSB end of the provided Charging Cable to the
DC In Charging Port on the unit and connect the USB end to a suitable USB
adaptor (DC 5V, 1A). The Battery Indicator shows red during charging and
turns off when the unit is fully charged. Remove the Charging Cable from the
unit promptly.
Note: For faster charging, set the On/Off Switch on the rear of the unit to
the Off position.

Remote control

The remote control uses 2 x AAA batteries (included). Ensure correct
polarities when inserting/replacing batteries.
7