Generic Pioneer Charter OCAP.fm Page 3 Friday, July 20, 2007 1:28 PM INTRODUCTION The C4000 and S4000 Remote Controls by Universal Electronics are our latest generation universal remote controls. Their sophisticated technology allows you to consolidate up to five of your original home entertainment remote controls into one easy-to-use product.
Generic Pioneer Charter OCAP.fm Page 4 Friday, July 20, 2007 1:28 PM FEATURES AND FUNCTIONS Use the illustrations below to locate features on the C4000 and S4000 Remote Controls and then study the Key Charts (on the next three pages) to learn how they function.
Page 5
Generic Pioneer Charter OCAP.fm Page 5 Friday, July 20, 2007 1:28 PM S4000 Remote Control www.urcsupport.com...
Generic Pioneer Charter OCAP.fm Page 6 Friday, July 20, 2007 1:28 PM Key Charts: C4000 and S4000 Remote Controls Function Use SYSTEM ON/OFF to control the Master Power macro. For MASTER POWER control, see “Using the System On/Off Key” on page 19. Use SET UP for all programming sequences.
Page 7
Generic Pioneer Charter OCAP.fm Page 7 Friday, July 20, 2007 1:28 PM Function Use A, B, C, or D to access additional cable features (see your set-top box’s manual). Use VOL+ (or VOL-) to raise (or lower) the audio volume. Use FAV to cycle through your favorite channels stored in your set-top box.
Page 8
Generic Pioneer Charter OCAP.fm Page 8 Friday, July 20, 2007 1:28 PM Function Press ASPECT once to change the aspect ratio of the show you are watching. (Not available on all set-top boxes). Use PIP ON-OFF to switch the Picture- In-Picture feature on or off (if available on your TV or cable service).
Generic Pioneer Charter OCAP.fm Page 9 Friday, July 20, 2007 1:28 PM Device Table NOTE: Please refer to the table below when performing the instructions in “Programming Device Control” on page 10 or “Setting Up a Combo Unit” on page 11. After programming, the C4000 and S4000 Remote Controls will be able to control the following types of devices:...
Generic Pioneer Charter OCAP.fm Page 10 Friday, July 20, 2007 1:28 PM Locate the two (2) enclosed AA batteries. Match the + and - marks with those in the battery case, then insert them. Align the cover’s keys with the case’s holes and press the cover back into place.
Generic Pioneer Charter OCAP.fm Page 11 Friday, July 20, 2007 1:28 PM NOTE: If the selected mode key emits a long blink, the entry is invalid. Repeat steps 2 through 3 and try entering the same code again. Aim the remote control at the device and press PWR once.
Generic Pioneer Charter OCAP.fm Page 12 Friday, July 20, 2007 1:28 PM For a TV/DVD Combo, turn on your TV/DVD Combo and insert a DVD. (For a TV/VCR Combo, insert a videocassette). On the remote control, press DVD once; it blinks once.
Generic Pioneer Charter OCAP.fm Page 13 Friday, July 20, 2007 1:28 PM NOTE: Use the following device code digits to control a specific device: 0 = Cable/STB 1 = TV 2 = DVD/VCR 3 = Audio For example, to search for a code for your TV: Turn on your TV.
Page 14
Generic Pioneer Charter OCAP.fm Page 14 Friday, July 20, 2007 1:28 PM For example, to find out which code is operating your TV: On the remote control, press TV once; it blinks once. Then press and hold SET UP until the TV key blinks twice.
Generic Pioneer Charter OCAP.fm Page 15 Friday, July 20, 2007 1:28 PM PROGRAMMING CHANNEL CONTROL LOCK By default, the remote control’s channel-control capabilities are locked to the cable converter. The affected keys are 1 through 0, CH+, CH-, and LAST. This guarantees that you do not inadvertently change a channel on your TV or VCR.
Generic Pioneer Charter OCAP.fm Page 16 Friday, July 20, 2007 1:28 PM DVD, TV or CBL mode. You can perform Individual Volume Unlock on a selected device to set its volume control for independent operation. Unlocking Volume Control for a Single Device (Individual Volume Unlock) Assuming Global Volume Lock is active, select a mode on the remote control that you want to...
Generic Pioneer Charter OCAP.fm Page 17 Friday, July 20, 2007 1:28 PM Locking Volume Control To One Mode (Global Volume Lock) On the remote control, press and hold SET UP until the last-selected device key blinks twice. Enter 9 9 3. The last-selected device key blinks twice.
Generic Pioneer Charter OCAP.fm Page 18 Friday, July 20, 2007 1:28 PM Enter 9 8 2. The CBL (or STB) key blinks twice, indicating ID Lock is again locked. PROGRAMMING THE ON DEMAND MACRO KEY The C4000 and S4000 Remote Controls includes one macro key (the ON DEMAND key).
Generic Pioneer Charter OCAP.fm Page 19 Friday, July 20, 2007 1:28 PM Clearing the ON DEMAND Macro Key On the remote control, press CBL (or STB) once; it blinks once. Then press and hold SET UP until the CBL (or STB) key blinks twice. Enter 9 9 5.
Generic Pioneer Charter OCAP.fm Page 20 Friday, July 20, 2007 1:28 PM USING KEYMOVER The C4000 and S4000 Remote Controls include a Keymover feature that allows you to map (or copy) keys from one mode (i.e., source mode) to another mode (i.e., destination mode).
Generic Pioneer Charter OCAP.fm Page 21 Friday, July 20, 2007 1:28 PM Restoring All Keymover Keys in a Single Mode On the remote control, press CBL or STB once; it blinks once. Then press and hold SET UP until the CBL key blinks twice. Enter 9 9 4.
Generic Pioneer Charter OCAP.fm Page 22 Friday, July 20, 2007 1:28 PM TROUBLESHOOTING PROBLEM: Device key does not blink when you press a key. SOLUTION: Replace the batteries with two (2) new AA batteries (see “Installing Batteries” on page 9). PROBLEM: Device key blinks when you press a key, but home entertainment device does not respond.
Generic Pioneer Charter OCAP.fm Page 40 Friday, July 20, 2007 1:28 PM Setup Codes for TV/VCR Combos Controlled by the TV America Action 10180 Audiovox 10180 Emerson 10236 Controlled by the VCR Broksonic 21479 Citizen 21278 Curtis Mathes 21035 Daewoo 21278 Emerson 20593, 21278, 21479...
Generic Pioneer Charter OCAP.fm Page 41 Friday, July 20, 2007 1:28 PM Setup Codes for TV/VCR/DVD Combos Controlled by the TV Akai 11903 Controlled by the DVD Akai 20899 Broksonic 20868 Emerson 20821 20821 Funai 21334 Magnavox 20821 Panasonic 21362, 21462 21132 Sharp 20630...
Need help?
Do you have a question about the Charter C4000 and is the answer not in the manual?
Questions and answers