E-Z UP PATRIOT 10' X 10' INSTANT SHELTER Instruction Sheet

INSTRUCTION SHEET
Includes: (1) 10' PATRIOT
(1) Vented Top, (1) 4-Piece Spike Kit, (1) Trax

SET UP

1
OPENING THE SHELTER FRAME
• Place your E-Z UP frame in the center of the area
®
to be sheltered.
• Lift and partially pull the shelter frame apart.
2
ATTACHING THE SHELTER TOP
• Place the vent top over the top part of the frame
and slip the corners into the pockets.
• Unfold the fabric top and place on top of the frame.
• Secure the fabric top to the corners of the frame
using the hook and loop connections.
3
LOCKING THE FRAME
• From under the shelter, use one hand to push
the ONE-UP hub straight up until it clicks
TM
into the pole.
4
ADJUSTING THE SHELTER HEIGHT
• Finish securing the frame inside the shelter
top using the hook and loop strips.
• Press the toggle adjustment on each leg and
raise or lower to adjust the shelter height.
5
SECURING THE SHELTER IN PLACE
• Insert the supplied stake into the foot of each shelter leg.
Frame, (1) Water-Resistant Fabric Top,
TM
Roller Bag
TM
4x
Click